ETSI TS 122 340 V15.0.0 (2018-07)

Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; IP Multimedia Subsystem (IMS) messaging; Stage 1 (3GPP TS 22.340 version 15.0.0 Release 15)

ETSI TS 122 340 V15.0.0 (2018-07)

Name:ETSI TS 122 340 V15.0.0 (2018-07)   Standard name:Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; IP Multimedia Subsystem (IMS) messaging; Stage 1 (3GPP TS 22.340 version 15.0.0 Release 15)
Standard number:ETSI TS 122 340 V15.0.0 (2018-07)   language:English language
Release Date:12-Jul-2018   technical committee:3GPP SA 1 - Services
Drafting committee:   ICS number:
ETSI TS 122 340 V15.0.0 (2018-07)






TECHNICAL SPECIFICATION
Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS);
LTE;
IP Multimedia Subsystem (IMS) messaging;
Stage 1
(3GPP TS 22.340 version 15.0.0 Release 15)

---------------------- Page: 1 ----------------------
3GPP TS 22.340 version 15.0.0 Release 15 1 ETSI TS 122 340 V15.0.0 (2018-07)



Reference
RTS/TSGS-0122340vf00
Keywords
GSM,LTE,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at

If you find errors in the present document, please send your comment to one of the following services:

Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.

GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 22.340 version 15.0.0 Release 15 2 ETSI TS 122 340 V15.0.0 (2018-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 22.340 version 15.0.0 Release 15 3 ETSI TS 122 340 V15.0.0 (2018-07)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 4
Introduction . 4
1 Scope . 5
2 References . 5
3 Definitions, symbols and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 6
4 Informative description of messaging services in the IMS . 7
5 Informative description of messaging types . 7
6 Immediate messaging requirements . 8
6.1 General requirements . 8
6.2 Message content requirements . 9
6.3 Management requirements . 9
6.4 Message delivery requirements . 9
6.5 Storage requirements . 9
6.6 User privacy requirements . 10
6.7 Message Filtering . 10
7 Session based messaging requirements . 11
7.1 General requirements . 11
7.2 Message content requirements . 12
7.3 Management requirements . 12
7.4 Message delivery requirements . 13
7.5 Storage requirements . 13
7.6 User privacy requirements . 13
7.7 Message Filtering . 14
8 Addressing requirements . 14
9 Security. 15
10 Charging . 15
11 Interworking . 16
11.1 General . 16
11.2 Requirements for SMS-Immediate Messaging service-level interworking . 16
11.3 Requirements for SMS-Session based Messaging service-level interworking . 16
Annex A (informative): Change history . 18
History . 19

ETSI

---------------------- Page: 4 ----------------------
3GPP TS 22.340 version 15.0.0 Release 15 4 ETSI TS 122 340 V15.0.0 (2018-07)
Foreword
rd
This Technical Specification has been produced by the 3 Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
Introduction
In today's world there are many different types of messaging services available both in the wired and wireless worlds.
Some messaging services are supported in both environments; others are only to be found in one. The expectations of
the services differ in that some are designed to be used in what is perceived as 'real' time, whereas others are designed
as a 'mailbox' service where the message is stored ready for collection or delivery at a later stage.
The 3GPP Technical Report TR22.940 identifies the issues and needs surrounding messaging solutions related to the
3GPP IP Multimedia Subsystem (IMS) taking into consideration use cases that illustrate the needs of both service
providers and users. This Technical Specification takes the Technical Report into account when defining the
requirements for the support of IMS Messaging.
IMS Messaging services incorporates one or more of the following messaging types Immediate messaging and Session
based messaging. With Immediate messaging the sender expects immediate message delivery in what is perceived as
real time. With Session based messaging a communications association is established between two or more users before
communication can take place. In the simplest form Session based messaging maybe a direct communication between
two users. This specification defines the requirements for both the Immediate message type and the Session based
message type.
The specification provides the ability to develop interoperable messaging services that use Immediate and/or Session
based message types.
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 22.340 version 15.0.0 Release 15 5 ETSI TS 122 340 V15.0.0 (2018-07)
1 Scope
The present document specifies the stage one description of the IMS Messaging services. Stage one is an overall service
description and defines service requirements, primarily from the subscriber's and service providers' points of view, and
does not deal with the details of the human interface itself.
The present TS includes information applicable to network operators, service providers and terminal, switch and
database manufacturers.
The present TS contains the requirements for IMS Messaging services, which are sufficient to provide a complete
service. The messaging types identified in this document are: immediate messaging and session based messaging.
It is highly desirable that technical solutions for IMS Messaging services should be sufficiently flexible to allow for
possible enhancements. Additional functionalities not documented in this 3GPP TS may implement requirements which
are considered outside the scope of this 3GPP TS. Such additional functionality shall not compromise conformance to
the core requirements of the service.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document.
[1] Void
rd
[2] 3GPP TS 22.250: 3 Generation Partnership Project; Technical Specification Group Services and
System Aspects; Stage 1, IMS Group Management
[3] RFC 2486: "The Network Access Identifier"
rd
[4] 3GPP TS 21.133; 3 Generation Partnership Project; Technical Specification Group Services and
System Aspects; 3G Security; Security Threats and Requirements
rd
[5] 3GPP TS 26.140; 3 Generation Partnership Project; Technical Specification Group Services and
System Aspects; Multimedia Messaging Service (MMS); Media formats and codecs
[6] 3GPP TS 26.234: "End-to-end transparent streaming Service (PSS); Protocols and Codecs".
rd
[7] 3GPP TS 22.228; 3 Generation Partnership Project; Technical Specification Group Services and
System Aspects; Service requirements for the Internet Protocol (IP) multimedia core network
subsystem; Stage 1
[8] 3GPP TS 26.244: "Transparent end-to-end packet switched streaming service (PSS); 3GPP file
format (3GP)”;
[9] 3GPP TS 26.245: "Transparent end-to-end packet switched streaming service (PSS); Timed text
format”.
ETSI

---------------------- Page: 6 ----------------------
3GPP TS 22.340 version 15.0.0 Release 15 6 ETSI TS 122 340 V15.0.0 (2018-07)
3 Definitions, symbols and abbreviations
3.1 Definitions
Immediate messaging: A type of IMS Messaging service by which the sender expects immediate message delivery in
(near) real time fashion
IMS Messaging services: A group of services, supported by capabilities of the 3GPP IP Multimedia Subsystem 3GPP
TS 22.228 [7], that allows an IMS user to send and receive messages to other users. IMS messaging services comprise
of one or more types: Immediate messaging and Session based messaging.
Session based messaging: A type of IMS Messaging service by which the sender expects immediate message delivery
in (near) real time fashion . In addition the sender(s) and the receiver(s) have to join to a messaging session e.g. chat
room, before message exchange can take place
3.2 Abbreviations
IP Internet Protocol
IMS IP Multimedia Subsystem
OMA Open Mobile Alliance

ETSI

---------------------- Page: 7 ----------------------
3GPP TS 22.340 version 15.0.0 Release 15 7 ETSI TS 122 340 V15.0.0 (2018-07)
4 Informative description of messaging services in the
IMS
As 3GPP has developed the concept of IMS it is thought useful to consider how a SIP based IP network can be utilised
to provide messaging capabilities. One of the chief characteristics of SIP is its ability to rapidly and efficiently create
real-time sessions between groups of users. It therefore appears that SIP based messaging would be a potential
candidate to provide the equivalent of “Chat Room” and “Instant Messaging” (IM) type services found on the Internet
today. Typical characteristics instant messaging are instant delivery of the messages to the targeted recipient(s) and
interaction with presence information where users are able to see who is on-line as well as their status.
A chat room is a "place" where multiple persons can join, follow and contribute to the ongoing discussion and leave the
"room" at any time. Chat rooms are more permanent in nature when compared to IM exchanges and may be created by
users or service providers. Additionally, chat rooms can be further divided to the private and public chat rooms.
Normally, users who are participating in chat room will receive all the messages that are sent by the other participants.
Similarly, the users are also able to send private messages to the chat room or even privately to some participant.
Unfortunately, the most popular internet based instant messaging services are usually based upon closed and proprietary
protocols which has made it impossible for different service providers to allow interoperable messaging between their
respective users. Additionally, internet based services do not take into consideration the wireless environment and the
needs of operators to provide services that are commercially viable by for example, providing support for charging. This
technical specification will further elaborate the essential messaging characteristic of these services and state how they
may be enhanced, e.g. operators may be able to create and then advertise chat rooms containing specific content where
users who join the room may be charged an 'entrance' fee,

JoJoiinn t too cchhaatt
ChChatat S Seerrvveerr MeMessssagagee
MeMessssagagee
PePetteerr
MeMessssagagee
SSenendd a p a prriivvatatee mmeessssagagee t too KenKen
HaHarrrryy
IInvitnvitee A Ammaanndada
ttoo jo join tin too cchhaatt
KeKenn

JoJoiinn t too cchhatat
AmAmaannddaa

Figure 1. Example IMS Messaging service: Chat room

5 Informative description of messaging types
Messaging can be divided to two different main classes based on the expectation of the sender. The sender either
expects the message to be delivered immediately or he does not care so much whether the message is delivered
immediately or later.
The immediate case can be further divided to two different sub-classes based on the actions required form the user
before he can engage in a communication. The user can both send and receive messages without any prior actions or he
may be required to join to a messaging session before the message exchange can take place.
The messaging types considered in this specification are
- Immediate messaging:
ETSI

---------------------- Page: 8 ----------------------
3GPP TS 22.340 version 15.0.0 Release 15 8 ETSI TS 122 340 V15.0.0 (2018-07)
Typically, sender is aware of the availability of the recipient(s) (possibly through the use of the Presence service)
before sending this type of message as, if the recipient is not available, the message may be discarded or
deferred. An immediate message may be deferred by the recipient's network based on the message filtering
settings defined by the recipient or by the recipient's IMS service provider.
- Session based messaging:
The sender and recipient expect near real time message delivery. Typically, recipients of the session based
messaging that are not joined to a group or are not available will not receive the messages. Typically, a sender
may send a message to all participants in the messaging session without addressing them individually.
6 Immediate messaging requirements
6.1 General requirements
Network operators have different network configuration and commercial requirements. IMS Messaging shall be
supported in a manner that meets the operator's IMS requirements. Thus, an identified set of functionalities and formats
shall be standardized to ensure interoperability across networks and terminals to support IMS Messaging.
The following general requirements shall be supported by Immediate messaging.
a) It shall be possible for the UE and the network to differentiate between immediate messages from other
messaging types.
b) Within the capabilities of networks and terminals, the user shall have a consistent experience regardless of the
access network e.g. 3GPP systems, fixed networks, the Internet.
c) Immediate messaging shall support a minimum set of functionality for message delivery, management and
filtering to ensure interoperability between different terminals and networks.
d) Immediate messaging shall be able to support the ability of the recipient's network to take into account the
recipient's terminal capabilities. In addition, the originating network/terminal may also be able to take into
account recipient's terminal capabilities. Specifically the recipient's terminal capabilities that may be taken into
account at a minimum include:
1) Display capabilities (including screen size, number of colours, number of lines of text, etc);
2) Media content types supported (Audio, Video etc);
3) Media content formats supported (JPEG, GIF, etc);
4) Media Storage capacity;
5) Encryption/Security mechanisms supported
The capabilities of the user's terminal may be reflected in the message filtering and corresponding actions as
identified in clause 6.7.
e) Immediate messaging should be able to take into account the availability and changes of the state of availability
of the terminal. Immediate messaging shall be able to make use of the Presence Service, if provided by the
network.
f) It shall be possible to store in the ISIM a number of sets of configuration information to allow access to
Immediate messaging services. One of these sets of configuration information is preset by the issuer of the ISIM.
Such preset configuration information set shall only be configurable by issuer of the ISIM. The preset
configuration information is selected unless otherwise specified by the user. It shall be possible to retain the
configuration information when the UICC is used in different terminals.
g) It shall be possible to send and receive immediate messages without prior establishing a messaging session.
h) It shall be possible for the network operator providing the Immediate messaging service to choose, wherever
possible, the most suitable transport mechanism for carrying messages (e.g. signalling network, dedicated PDP
context, other access technologies and so on…) both for UE originated and UE terminated messages.
ETSI

---------------------- Page: 9 ----------------------
3GPP TS 22.340 version 15.0.0 Release 15 9 ETSI TS 122 340 V15.0.0 (2018-07)
i) It shall be possible for the network operator providing the Immediate messaging service to choose, wherever
possible, the parameters used (i.e. QoS) both for UE originated and UE terminated messages.
6.2 Message content requirements
Following requirements are specific to content delivered with immediate messaging.
a) Content size shall not be limited by technology.
b) It shall be possible to carry different media including text, images, video and audio within a single message.
Media types shall be MIME encoded.
c) Immediate messaging shall provide a minimum set of supported formats to ensure full interoperability between
different terminals and networks (e.g. JPEG for pictures, AMR for speech, H.263 for video). The minimum set
of supported formats shall be common to all IMS Messaging types. The minimum set of supported formats
should be aligned with formats used in other 3GPP-defined services 3GPP TS 26.140 [5], 3GPP TS 26.234 [6].
d) Content formats shall be defined so that interworking with 3GPP and Internet messaging solutions is facilitated.
e) It shall be possible to compose message of either a single medium (e.g. voice) or multi-media (e.g. voice and
video). The IMS Messaging service shall be able to support a request for media sequencing.
6.3 Management requirements
The following management requirements shall be supported.
a) The IMS service provider shall be able to enable/disable message delivery and submission.
b) Immediate messaging shall be able to support a request from the user to enable/disable message delivery.
c) Immediate messaging shall be able to support the user to manage his user service profile related to Immediate
messaging (e.g. customize his messaging environment within the capabilities of the terminal, network and
messaging application). This could be unconditional or conditional e.g. depending on roaming conditions or
operator restrictions.
d) Immediate messaging shall allow an IMS service provider to configure Immediate messaging environment e.g.
in such a way that submitted and/or incoming Immediate messages of a particular user are stored in a network
based repository.
6.4 Message delivery requirements
Following requirements define the message delivery.
a) Message delivery shall be immediate i.e. messages are transported by the IMS system to the recipient's terminal
(without notifications) subject to message filtering settings defined by the recipient or by the recipient's IMS
service provider.
b) Messages shall not be stored by the network. If supported by the recipient's network as an application option
messages may be stored in the recipients network.
c) It shall be possible for the sender to receive delivery acknowledgements (success/failure) for sent messages.
6.5 Storage requirements
The following storage requirements shall be supported.
a) It shall be possible for a sender to request to persistently store a sent Immediate message in a network based
repository at the time of sending if the IMS service provider provides such application level service.
b) Immediate messaging shall be able to support a request from a user to retrieve messages that are stored in a
network based repository.
c) Immediate messaging shall be able to support a request from a user to delete messages that are stored in a
network based repository.
ETSI

---------------------- Page: 10 ----------------------
3GPP TS 22.340 version 15.0.0 Release 15 10 ETSI TS 122 340 V15.0.0 (2018-07)
d) Immediate messaging shall be able to support a request from a user to forward one or more messages that are
stored in a network based repository to another destination.
e) Immediate messaging shall be able to support a request from a user to view the list of messages and message
related attributes, such as sender, recipient, subject and date/time, in a network based repository.
f) Immediate messaging shall be able to support a request from a user to upload one or more Immediate messages
into a network based repository for persistent storage.
6.6 User privacy requirements
Following requirements define user privacy.
a) It shall be possible for the recipient to see the public ID of the sender of the message unless the sender has
requested to hide it.
b) It shall be possible for the sender of the message to request to hide its public ID from the recipient (anonymous
sender).
The sender's public ID shall not be delivered to the recipient. The capability of public ID hiding is an IMS
service provider and legislation issue and it may or may not be available. If the service is not available the
message shall not be delivered to the recipient.
6.7 Message Filtering
It shall be possible for a subscriber to set up, modify, and delete filters in the network of the subscriber's IMS service
provider, in order to control the treatment of a message by the network when an immediate message is received when
the subscriber is either unavailable or when the subscriber does not currently want to receive messages. The filters shall
also support the ability of the subscriber to specify the maximum size and type of message content etc that they are or
are not willing to accept. The filters shall also support the ability of the subscriber to block (and u
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27