ETSI TR 134 926 V15.0.0 (2018-07)

Universal Mobile Telecommunications System (UMTS); LTE; Electromagnetic compatibility (EMC); Table of international requirements for mobile terminals and ancillary equipment (3GPP TR 34.926 version 15.0.0 Release 15)

ETSI TR 134 926 V15.0.0 (2018-07)

Name:ETSI TR 134 926 V15.0.0 (2018-07)   Standard name:Universal Mobile Telecommunications System (UMTS); LTE; Electromagnetic compatibility (EMC); Table of international requirements for mobile terminals and ancillary equipment (3GPP TR 34.926 version 15.0.0 Release 15)
Standard number:ETSI TR 134 926 V15.0.0 (2018-07)   language:English language
Release Date:15-Jul-2018   technical committee:3GPP RAN 4 - Specification for radio performance
Drafting committee:   ICS number:
ETSI TR 134 926 V15.0.0 (2018-07)






TECHNICAL REPORT
Universal Mobile Telecommunications System (UMTS);
LTE;
Electromagnetic compatibility (EMC);
Table of international requirements
for mobile terminals and ancillary equipment
(3GPP TR 34.926 version 15.0.0 Release 15)

---------------------- Page: 1 ----------------------
3GPP TR 34.926 version 15.0.0 Release 15 1 ETSI TR 134 926 V15.0.0 (2018-07)



Reference
RTR/TSGR-0434926vf00
Keywords
LTE,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at

If you find errors in the present document, please send your comment to one of the following services:

Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.

GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TR 34.926 version 15.0.0 Release 15 2 ETSI TR 134 926 V15.0.0 (2018-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be
interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TR 34.926 version 15.0.0 Release 15 3 ETSI TR 134 926 V15.0.0 (2018-07)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 4
Introduction . 4
1 Scope . 5
2 References . 5
3 Definitions and abbreviations . 6
3.1 Definitions . 6
4 Table of International EMC Requirements for Mobile terminals and ancillary equipment . 8
Annex A (informative): Change history . 12
History . 13

ETSI

---------------------- Page: 4 ----------------------
3GPP TR 34.926 version 15.0.0 Release 15 4 ETSI TR 134 926 V15.0.0 (2018-07)
Foreword
This Technical Report has been produced by the 3GPP.
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of this TR, it will be re-released by the TSG with an identifying
change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 Indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
Introduction
This Technical Report is a living document and will continuously be upgraded as standards and regulations change.
Sections will be added for new regions or nations, which enter the 3GPP and have different requirements. It is the
intention to reference global standards but where it is known that none exist then alternative standards mandated by the
regional and or national requirements will be quoted.
The sole purpose of the document is as a reference to the current status at time of publication. When new versions are
published they will supersede the previous ones.
ETSI

---------------------- Page: 5 ----------------------
3GPP TR 34.926 version 15.0.0 Release 15 5 ETSI TR 134 926 V15.0.0 (2018-07)
1 Scope
The present document shows in tabular form most of the current regulatory and voluntary requirements by region or
nation, and is for information purposes only.
2 References
The following documents contain provisions, which, through reference in this text, constitute provisions of the present
document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document.
[1] IEC 61000-6-1 (1997): "Electromagnetic compatibility (EMC) – Part 6: Generic standards -
Section 1: Immunity standard for residential, commercial and light-industrial environments".
[2] IEC 61000-6-3 (1996): "Electromagnetic compatibility (EMC) – Part 6: Generic standards -
Section 3: Emission standard for residential, commercial and light-industrial environments.
[3] ISO 7637-1 (1990): "Road vehicles - Electrical disturbance by conduction and coupling - Part 1:
Passenger cars and light commercial vehicles with nominal 12 V supply voltage - Electrical
transient conduction along supply lines only".
[4] ISO 7637-2 (1990): "Road vehicles - Electrical disturbance by conduction and coupling - Part 2:
Commercial vehicles with nominal 24 V supply voltage - Electrical transient conduction along
supply lines only".
[5] RECOMMENDATION ITU-R SM.329 " Unwanted emissions in the spurious domain "
rd
[6] IEC CISPR publication 22; 3 edition (1997-11); "Information technology equipment; Radio
disturbance characteristics – Limits and methods of measurement"
[7] IEC CISPR publication 16-1; (1993); Radio disturbance and immunity measuring apparatus";
Am.1 (1997); "Specification for radio disturbance and immunity measuring apparatus and
methods"
[8] IEC 61000-3-2; (1995-03); "Electromagnetic compatibility; Part 3 - Limits; section 2 – Limits for
harmonic current emissions (equipment input current ≤ 16 A per phase)"; Am.1 (1997-09)
[9] IEC 61000-3-3; (1994-12); "Electromagnetic compatibility; Part 3 - Limits; section 2 – Limitation
of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current
≤ 16 A"
[10] IEC 61000-4-2; "Electromagnetic compatibility (EMC) – Part 4: Testing and measurement
techniques – section 2: Electrostatic discharge immunity test – Basic EMC publication"
[11] IEC 61000-4-3; "Electromagnetic compatibility (EMC) – Part 4: Testing and measurement
techniques – section 3: Radiated, radio-frequency electromagnetic field immunity test"
[12] IEC 61000-4-4; "Electromagnetic compatibilit
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27