|
TECHNICAL SPECIFICATION
Core Network and Interoperability Testing (INT);
Completion of Communications to Busy Subscriber (CCBS)
and Completion of Communications by No Reply (CCNR)
using IP Multimedia (IM) Core Network (CN) subsystem;
Conformance Test Specification (3GPP™ Release 12);
Part 2: Test Suite Structure and Test Purposes (TSS&TP)
---------------------- Page: 1 ----------------------
2 ETSI TS 101 588-2 V6.1.1 (2018-07)
Reference
RTS/INT-00149-2
Keywords
CCBS, CCNR, conformance, IMS, testing,
TSS&TP
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
If you find errors in the present document, please send your comment to one of the following services:
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2018.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI TS 101 588-2 V6.1.1 (2018-07)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definitions, symbols and abbreviations . 5
3.1 Definitions . 5
3.2 Symbols . 6
3.3 Abbreviations . 6
4 Test Suite Structure (TSS) . 6
4.0 Table of Test Suite Structure . 6
4.1 Configuration . 6
5 Test Purposes (TP) . 7
5.1 Introduction . 7
5.1.0 General treatment . 7
5.1.1 TP naming convention . 7
5.1.2 Test strategy . 8
5.2 Actions at the originating AS . 8
5.2.1 CC Invocation . 8
5.2.2 CC Revocation . 25
5.2.3 CC Operation . 31
5.3 Actions at the terminating AS . 50
5.3.1 CC possible indication . 50
5.3.2 CC Invocation . 52
5.3.3 CC Revocation . 64
5.3.4 CC Operation . 67
5.4 Interaction of Call-Completion with other services . 91
5.4.1 Terminating Identification Restriction (TIR) . 91
5.4.2 Communication diversion services (CDIV) . 91
History . 117
ETSI
---------------------- Page: 3 ----------------------
4 ETSI TS 101 588-2 V6.1.1 (2018-07)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability
Testing (INT).
The present document is part 2 of a multi-part deliverable covering Completion of Communications to Busy Subscriber
(CCBS) and Completion of Communications by No Reply (CCNR) using IP Multimedia (IM) Core Network (CN)
subsystem; Conformance Test Specification, as identified below:
Part 1: "Protocol Implementation Conformance Statement (PICS)";
Part 2: "Test Suite Structure and Test Purposes (TSS&TP)".
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 4 ----------------------
5 ETSI TS 101 588-2 V6.1.1 (2018-07)
1 Scope
The present document specifies the test suite structure and test purposes of the Completion of Communications to Busy
Subscriber (CCBS) service and the Completion of Communication on no Reply (CCNR) service, based on stage three
of the IMS simulation services. Within the Next Generation Network (NGN) the stage 3 description is specified using
the IP-Multimedia Call Control Protocol based on Session Initiation Protocol (SIP) and Session Description Protocol
(SDP) as defined in ETSI TS 124 642 [1] in compliance with the relevant requirements.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI TS 124 642: "Digital cellular telecommunications system (Phase 2+); Universal Mobile
Telecommunications System (UMTS); LTE; Completion of Communications to Busy Subscriber
(CCBS) and Completion of Communications by No Reply (CCNR) using IP Multimedia (IM)
Core Network (CN) subsystem; Protocol specification (3GPP TS 24.642 Release 12)".
[2] ETSI TS 101 588-1: "Core Network and Interoperability Testing (INT); Completion of
Communications to Busy Subscriber (CCBS) and Completion of Communications by No Reply
(CCNR) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance Test
Specification (3GPP™ Release 12); Part 1: Protocol Implementation Conformance Statement
(PICS)".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
Not applicable.
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ETSI TS 124 642 [1] apply.
ETSI
---------------------- Page: 5 ----------------------
6 ETSI TS 101 588-2 V6.1.1 (2018-07)
3.2 Symbols
For the purposes of the present document, the symbols given in ETSI TS 124 642 [1] apply.
3.3 Abbreviations
For the purposes of the present document, the abbreviations given in ETSI TS 124 642 [1] apply.
4 Test Suite Structure (TSS)
4.0 Table of Test Suite Structure
Table 4-1: Test Suite Structure
CC
originating_AS Invocation CC_N01_xxx
Revocation CC_N02_xxx
Operation CC_N03_xxx
terminating_AS possibleIndication CC_N04_xxx
Invocation CC_N05_xxx
Revocation CC_N06_xxx
CCOperation CC_N07_xxx
Interaction TIR CC_N08_xxx
CDIV CC_N09_xxx
4.1 Configuration
The scope of the present document is to test the signalling and procedural aspects of the stage 3 requirements as
described in [1]. The stage 3 description respects the requirements to several network entities and to requirements
regarding to end devices. Therefore, several interfaces (reference points) are addressed to satisfy the test of the different
entities.
Therefore, to test the appropriate entities the configurations below are applicable:
Testing of the Application Server: This entity is responsible to perform the service. Hence the ISC interface is the
appropriate access point. Figure 4-1 points to this.
Figure 4-1: Applicable interface to test AS functionalities
If the ISC interface is not accessible it is also applicable to perform the test of the AS using any NNI (Mw, Mg, Mx)
interface (consider figure 4-2). In case only the Gm interface is accessible this shall be used instead. In this case, be
aware that the verification of several requirements is impeded.
ETSI
---------------------- Page: 6 ----------------------
7 ETSI TS 101 588-2 V6.1.1 (2018-07)
Figure 4-2: Applicable interfaces to test using the (generic) NNI interface
Testing of User Equipment: There are several requirements regarding to the end devices. Therefore, a special
configuration appears.
Figure 4-3: Applicable configuration to test the User Equipment
5 Test Purposes (TP)
5.1 Introduction
5.1.0 General treatment
For each test requirement a TP is defined.
5.1.1 TP naming convention
TPs are numbered, starting at 001, within each group. Groups are organized according to the TSS. Additional references
are added to identify the actual test suite and whether it applies to the network or the user (see table 5-1).
ETSI
---------------------- Page: 7 ----------------------
8 ETSI TS 101 588-2 V6.1.1 (2018-07)
Table 5-1: TP identifier naming convention scheme
Identifier: __
= supplementary service: e.g. "CC"
= type of IUT: U User - equipment
N Network
= group 2 digit field representing group reference according to TSS
= sequential number (001 to 999)
5.1.2 Test strategy
As the base standard ETSI TS 124 642 [1] contains no explicit requirements for testing, the TPs were generated as a
result of an analysis of the base standard and the PICS specification ETSI TS 101 588-1 [2]. The criteria applied include
the following:
• whether or not a test case can be built from the TP is not considered.
5.2 Actions at the originating AS
5.2.1 CC Invocation
TSS TP Reference Selection expression
CC/originating_AS/Invocation CC_N01_001 4.5.4.2.1.1.1, PICS 4.7.1/9
4.5.4.2.1.1.3
Test purpose
Detecting CCNL is possible.
Ensure that when an originating user establishes a session to a terminating user not logged in, a 183 (Session
Progress) response is forwarded to the originating user if a 480 (Temporarily Unavailable) response has been received.
The Application Server provides an announcement.
Preconditions:
SIP header values:
480 Temporarily Unavailable
Call-Info: ;purpose=call-completion;m=NL
Comments:
SIP 1 (Gm) SUT SIP 2 (ISC)
INVITE INVITE
480 (Temporarily Unavailable)
183 Session Progress ACK
Announcement that CC is possible
Apply post test routine
ETSI
---------------------- Page: 8 ----------------------
9 ETSI TS 101 588-2 V6.1.1 (2018-07)
TSS TP Reference Selection expression
CC/originating_AS/Invocation CC_N01_002 4.5.4.2.1.1.1,
4.5.4.2.1.1.3
Test purpose
Detecting CCBS is possible.
Ensure that when an originating user establishes a session to a terminating user is busy, a 183 (Session Progress)
response is forwarded to the originating user if a 486 (Busy Here) response has been received. The Application Server
provides an announcement.
Preconditions:
SIP header values:
486 Busy Here:
Call-Info: ;purpose=call-completion;m=BS
Comments:
SIP 1 (Gm) SUT SIP 2 (ISC)
INVITE INVITE
486 (Busy Here)
183 Session Progress
ACK
Announcement that CC is possible
Apply post test routine
TSS TP Reference Selection expression
CC/originating_AS/Invocation CC_N01_003 4.5.4.2.1.1.1,
4.5.4.2.1.1.3
Test purpose
Detecting CCNR is possible.
Ensure that when an originating user establishes a session to a terminating user is busy, a 183 (Session Progress)
response is forwarded to the originating user if a 180 (Ringing) response has been received. The Application Server
provides an announcement. The Call-Info header is removed from the 180 (Ringing) sent to the originating user.
Preconditions:
SIP header values:
180 Ringing 1
Call-Info: ;purpose=call-completion;m=NR
Comments:
SIP 1 (Gm) SUT SIP 2 (ISC)
INVITE INVITE
180 (Ringing) 1
180 (Ringing) Start CCNR-T5
Timeout CCNR-T5
Announcement that CC is possible
Apply post test routine
ETSI
---------------------- Page: 9 ----------------------
10 ETSI TS 101 588-2 V6.1.1 (2018-07)
TSS TP Reference Selection expression
CC/originating_AS/Invocation CC_N01_004 4.5.4.2.1.1.3 PICS 4.7.1/9
Test purpose
CCNL is possible hence not confirmed.
Ensure that when the originating user does not confirm the CCNL indication to invoke the service a 486 (Busy Here) is
forwarded to the originating user when Retention timer CC-T1 is expired.
Preconditions:
SIP header values:
480 Temporarily Unavailable 1
Call-Info: ;purpose=call-completion;m=NL
Comments:
SIP 1 (Gm) SUT SIP 2 (ISC)
INVITE INVITE
480 (Temporarily Unavailable) 1
183 Session Progress Start CC-T1 ACK
Announcement that CC is possible
480 (Temporarily Unavailable) Timeout CC-T1
ACK
Apply post test routine
TSS TP Reference Selection expression
CC/originating_AS/Invocation CC_N01_005 4.5.4.2.1.1.3
Test purpose
CCBS is possible hence not confirmed.
Ensure that when the originating user does not confirm the CCBS indication to invoke the service a 486 (Busy Here) is
forwarded to the originating user when Retention timer CC-T1 is expired.
Preconditions:
SIP header values:
486 Busy Here:
Call-Info: ;purpose=call-completion;m=BS
Comments:
SIP 1 (Gm) SUT SIP 2 (ISC)
INVITE INVITE
486 (Busy Here)
183 Session Progress Start CC-T1 ACK
Announcement that CC is possible
486 (Busy Here) Timeout CC-T1
ACK
Apply post test routine
ETSI
---------------------- Page: 10 ----------------------
11 ETSI TS 101 588-2 V6.1.1 (2018-07)
TSS TP Reference Selection expression
CC/originating_AS/Invocation CC_N01_006 4.5.4.2.1.1.3
Test purpose
CCNR is possible hence not confirmed.
Ensure that when the originating user does not confirm the CCBS indication to invoke the service a 199 (Early Dialog
Terminated) is forwarded to the originating user when Retention timer CC-T1 is expired.
Preconditions:
SIP header values:
180 Ringing 1
Call-Info: ;purpose=call-completion;m=NR
Comments:
SIP 1 (Gm) SUT SIP 2 (ISC)
INVITE INVITE
180 (Ringing) 1
180 (Ringing) Start CCNR-T5, CC-T1
Timeout CCNR-T5
Announcement that CC is possible
Timeout CC-T1
199 (Early Dialog Terminated)
Apply post test routine
ETSI
---------------------- Page: 11 ----------------------
12 ETSI TS 101 588-2 V6.1.1 (2018-07)
TSS TP Reference Selection expression
CC/originating_AS/Invocation CC_N01_007 4.5.4.2.1.1.5, NOT PICS 4.7.1/10 AND
4.5.4.2.1.1.6 NOT PICS 4.7.1/11
Test purpose
Successful CCBS request.
A 486 (Busy Here) is received from the terminating AS containing a Call-Info header field a purpose parameter set to
call-completion and the m parameter is set to BS. Ensure that the AS withholds the 486 and sends a 183 Session
Progress and starts to play an announcement to inform the originating user that Call Completion is possible. The
originating user activates via inband interaction the CCBS call completion service. Ensure that the AS sends a
SUBSCRIBE to the terminating AS. The NOTIFY received from the terminating AS confirms the successful invocation
of the CC service. The Application Server confirms the successful invocation to the originating user by sending of a 486
(Busy Here) final response.
Preconditions:
SIP header values:
486 Busy Here 1:
Call-Info: ;purpose=call-completion;m=BS
SUBSCRIBE sip: T-AS;m=BS
From:
To:
Contact:
Call.Info: ; purpose=call-completion;m=BS
P-Assertd-Identity: UE-A
Expires: CC-T3
Event:call-completion
NOTIFY
Event:call-completion
Content-Type: application/call-completion
cc-state: queued
Comments:
SIP 1 (Gm) SUT SIP 2 (ISC)
INVITE INVITE
486 (Busy Here) 1
183 Session Progress ACK
Announcement that CCBS is possible
Inband-interaction procedures for the CC activation
SUBSCRIBE
200 OK SUBCSRIBE
NOTIFY
200 OK NOTIFY
Confirm to the caller that the invocation was successful
486 (Busy Here) 2
ACK
Apply post test routine
ETSI
---------------------- Page: 12 ----------------------
13 ETSI TS 101 588-2 V6.1.1 (2018-07)
TSS TP Reference Selection expression
CC/originating_AS/Invocation CC_N01_008 4.5.4.2.1.1.5, PICS 4.7.1/10 AND PICS
4.5.4.2.1.1.6 4.7.1/11
Test purpose
Successful CCBS request.
A 486 (Busy Here) is received from the terminating AS containing a Call-Info header field a purpose parameter set to
call-completion and the m parameter is set to BS. Ensure that the AS withholds the 486 and sends a 183 Session
Progress and starts to play an announcement to inform the originating user that Call Completion is possible. The
originating user activates via inband interaction the CCBS call completion service. Ensure that the AS sends a
SUBSCRIBE to the terminating AS. The NOTIFY received from the terminating AS confirms the successful invocation
of the CC service. The Application Server confirms the successful invocation to the originating user by sending of a 486
(Busy Here) final response. Ensure that a Date header and a Content-Type header containing a message/external-
body value are present in the 486 sent to the originating user.
Preconditions:
SIP header values:
486 Busy Here 1:
Call-Info: ;purpose=call-completion;m=BS
SUBSCRIBE sip: T-AS;m=BS
From:
To:
Contact:
Call.Info: ; purpose=call-completion;m=BS
P-Assertd-Identity: UE-A
Expires: CC-T3
Event:call-completion
NOTIFY
Event:call-completion
Content-Type: application/call-completion
cc-state: queued
486 Busy Here 2:
Date:
Content-Type: message/external-body; access-type=”URL”; URL= < any url >
Comments:
SIP 1 (Gm) SUT SIP 2 (ISC)
INVITE INVITE
486 (Busy Here) 1
183 Session Progress ACK
Announcement that CCBS is possible
Inband-interaction procedures for the CC activation
SUBSCRIBE
200 OK SUBCSRIBE
NOTIFY
200 OK NOTIFY
Confirm to the caller that the invocation was successful
486 (Busy Here) 2
ACK
Apply post test routine
ETSI
---------------------- Page: 13 ----------------------
14 ETSI TS 101 588-2 V6.1.1 (2018-07)
TSS TP Reference Selection expression
CC/originating_AS/Invocation CC_N01_009 4.5.4.2.1.1.1
Test purpose
CCBS not possible, A CC queue limit has been exceeded.
Ensure that the AS does not offer the activation of the call completion service if the user A CCBS queue limit has been
exceeded. The 486 is passed through.
Preconditions: CCBS queue limit exceeded
SIP header values:
486 Busy Here:
Call-Info: ;purpose=call-completion;m=BS
Comments:
SIP 1 (Gm) SUT SIP 2 (ISC)
Set the A queue to limit
INVITE INVITE
100 Trying 100 Trying
486 (Busy Here) 486 (Busy Here)
ACK
ACK
TSS TP Reference Selection expression
CC/originating_AS/Invocation CC_N01_010 4.5.4.2.1.1.1 NOT PICS 4.7.1/3
Test purpose
CCBS invocation not possible, further identical request (communication parameters).
Ensure that the AS does not offer the activation of the CCBS call completion service if a request was activated for an
identical communication, determined by the stored basic communication information.
Preconditions:
SIP header values:
486 Busy Here:
Call-Info: ;purpose=call-completion;m=BS
Comments:
SIP 1 (Gm) SUT SIP 2 (ISC)
A successful CCBS request is already invoked
INVITE INVITE
100 Trying 100 Trying
486 (Busy Here) 486 (Busy Here)
ACK ACK
ETSI
---------------------- Page: 14 ----------------------
15 ETSI TS 101 588-2 V6.1.1 (2018-07)
TSS TP Reference Selection expression
CC/originating_AS/Invocation CC_N01_011 4.5.4.2.1.2
Test purpose
Unsuccessful CCBS request.
Ensure when the originating user invokes the CCBS service and the Application Server receives a 480 (Temporarily
Unavailable) to indicate short term denial or a 403 (Forbidden) to indicate long term denial the originating user receives
a confirmation that the CCBS request was not successful.
Preconditions:
SIP header values:
486 Busy Here 1:
Call-Info: ;purpose=call-completion;m=BS
SUBSCRIBE sip: T-AS; m=BS
From:
To:
Contact:
Call.Info: ; purpose=call-completion;m=BS
P-Assertd-Identity: UE-A
Expires: CC-T3
Event:call-completion
Comments:
SIP 1 (Gm) SUT SIP 2 (ISC)
INVITE INVITE
486 (Busy Here) 1
183 Session Progress ACK
Announcement that CCBS is possible
Inband-interaction procedures for the CC activation
SUBSCRIBE
CASE A 480 (Temporarily Unavailable)
CASE B
403 (Forbidden)
Confirm to the caller that the invocation was not successful
486 (Busy Here) 2
ACK
Apply post test routine
ETSI
---------------------- Page: 15 ----------------------
16 ETSI TS 101 588-2 V6.1.1 (2018-07)
TSS TP Reference Selection expression
CC/originating_AS/Invocation CC_N01_012 4.5.4.2.1.1.5
4.8.1
Test purpose
CCBS request. Timeout CC-T2.
Ensure that the CC request operation timer CC-T2 is started after CCBS request is received from caller. When the
timer CC-T2 is expired because no NOTIFY is received from the terminating user as a confirmation that the CCBS
request was successful at the terminating AS the CCBS request is rejected. The caller is informed.
Preconditions:
SIP header values:
486 Busy Here:
Call-Info: ;purpose=call-completion;m=BS
SUBSCRIBE sip:T-AS;m=BS
From:
To:
Contact:
Call.Info: ; purpose=call-completion;m=BS
P-Assertd-Identity: UE-A
Expires: CC-T3
Event:call-completion
Comments:
SIP 1 (Gm) SUT SIP 2 (ISC)
INVITE INVITE
100 Trying 100 Trying
486 (Busy Here)
183 Session Progress ACK
Announcement that CCBS is possible
Inband-interaction procedures for the CC activation
SUBSCRIBE
200 OK SUBCSRIBE
Start Timer CC-T2
↓
Timeout Timer CC-T2
Confirm to the caller that the invocation was not successful
486 (Busy Here)
ACK
ETSI
---------------------- Page: 16 ----------------------
17 ETSI TS 101 588-2 V6.1.1 (2018-07)
TSS TP Reference Selection expression
CC/originating_AS/Invocation CC_N01_013 4.5.4.2.1.1.5,
4.5.4.2.1.1.6
Test purpose
CCNR successful request.
A 180 (Ringing) is received from the terminating AS containing a Call-Info header field a purpose parameter set to
call-completion and the m parameter is set to BS. Ensure that the Application Server forwards a 180 (Ringing) without
the Call-Info header to the originating user and starts to play an announcement to inform the originating user that Call
Completion is possible. The originating user activates via inband interaction the CCNR call completion service. Ensure
that the AS sends a SU
...