|
STANDARD
SIST EN 319 522-4-1 V1.1.1:2018
ETSI EN 319 522-4-1 V1.1.1 (2018-09) Electronic Signatures and Infrastructures (ESI); Electronic Registered Delivery Services; Part 4: Bindings;
Sub-part 1: Message delivery bindings
EUROPEAN STANDARD SIST EN 319 522-4-1 V1.1.1:2018
ETSI ETSI EN 319 522-4-1 V1.1.1 (2018-09)2
Reference DEN/ESI-0019522-4-1 Keywords e-delivery services, registered e-delivery services, registered electronic mail ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at If you find errors in the present document, please send your comment to one of the following services: Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2018. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETM are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Association. SIST EN 319 522-4-1 V1.1.1:2018
ETSI ETSI EN 319 522-4-1 V1.1.1 (2018-09)3 Contents Intellectual Property Rights . 4 Foreword . 4 Modal verbs terminology . 4 1 Scope . 5 2 References . 5 2.1 Normative references . 5 2.2 Informative references . 5 3 Definitions and abbreviations . 6 3.1 Definitions . 6 3.2 Abbreviations . 6 4 Message delivery bindings - general concepts . 6 5 AS4 binding . 6 5.1 Introduction . 6 5.2 Generic requirements . 7 5.3 Signing and encryption of the AS4 message . 7 5.4 Binding of ERD dispatch . 8 5.5 Binding of ERDS receipt . 8 5.6 Binding of ERDS serviceInfo . 8 5.7 Binding of ERD payload . 8 6 IETF RFC 5322 binding . 9 History . 10
SIST EN 319 522-4-1 V1.1.1:2018
ETSI ETSI EN 319 522-4-1 V1.1.1 (2018-09)4 Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This European Standard (EN) has been produced by ETSI Technical Committee Electronic Signatures and Infrastructures (ESI). The present document is part 4, sub-part 1 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.3].
National transposition dates Date of adoption of this EN: 23 August 2018 Date of latest announcement of this EN (doa): 30 November 2018 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 May 2019 Date of withdrawal of any conflicting National Standard (dow): 31 May 2019
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
SIST EN 319 522-4-1 V1.1.1:2018
ETSI ETSI EN 319 522-4-1 V1.1.1 (2018-09)5 1 Scope The present document defines the binding of the ERD messages, whose semantics is defined in ETSI EN 319 522-2 [1] and whose format is defined in ETSI EN 319 522-3 [2], to the specific transmission protocol AS4 [4]. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at https://docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. [1] ETSI EN 319 522-2: "Electronic Signatures and Infrastructures (ESI); Electronic Registered Delivery Services; Part 2: Semantic Contents". [2] ETSI EN 319 522-3: "Electronic Signatures and Infrastructures (ESI); Electronic Registered Delivery Services; Part 3: Formats". [3] ETSI TS 119 312: "Electronic Signatures and Infrastructures (ESI); Cryptographic Suites". [4] OASIS: "AS4 Profile of ebMS 3.0 Version 1.0", OASIS Standard, January 2013. [5] W3C Recommendation: "XML Encryption Syntax and Processing Version 1.1", 11 April 2013. [6] ETSI EN 319 522-4-2: "Electronic Signatures and Infrastructures (ESI); Electronic Registered Delivery Services; Part 4: Bindings; Sub-part 2: Evidence and identification bindings". [7] ETSI EN 319 532-3: "Electronic Signatures and Infrastructures (ESI); Registered Electronic Mail (REM) Services; Part 3: Formats". 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents a
...