|
TECHNICAL SPECIFICATION
Universal Mobile Telecommunications System (UMTS);
LTE;
5G;
NR;
Multi-connectivity;
Overall description;
Stage-2
(3GPP TS 37.340 version 15.2.0 Release 15)
---------------------- Page: 1 ----------------------
3GPP TS 37.340 version 15.2.0 Release 15 1 ETSI TS 137 340 V15.2.0 (2018-09)
Reference
RTS/TSGR-0237340vf20
Keywords
5G,LTE,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
If you find errors in the present document, please send your comment to one of the following services:
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2018.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3GPP TS 37.340 version 15.2.0 Release 15 2 ETSI TS 137 340 V15.2.0 (2018-09)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 3 ----------------------
3GPP TS 37.340 version 15.2.0 Release 15 3 ETSI TS 137 340 V15.2.0 (2018-09)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 5
1 Scope . 6
2 References . 6
3 Definitions, symbols and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 7
4 Multi-RAT Dual Connectivity . 7
4.1 General . 7
4.1.1 Common MR-DC principles . 7
4.1.2 MR-DC with the EPC . 7
4.1.3 MR-DC with the 5GC . 8
4.1.3.1 E-UTRA-NR Dual Connectivity . 8
4.1.3.2 NR-E-UTRA Dual Connectivity . 8
4.2 Radio Protocol Architecture . 8
4.2.1 Control Plane . 8
4.2.2 User Plane . 9
4.3 Network interfaces . 11
4.3.1 Control Plane . 11
4.3.1.1 Common MR-DC principles . 11
4.3.1.2 MR-DC with EPC . 11
4.3.1.3 MR-DC with 5GC . 12
4.3.2 User Plane . 12
4.3.2.1 Common MR-DC principles . 12
4.3.2.2 MR-DC with EPC . 12
4.3.2.3 MR-DC with 5GC . 12
5 Layer 1 related aspects . 12
6 Layer 2 related aspects . 13
6.1 MAC Sublayer . 13
6.2 RLC Sublayer . 13
6.3 PDCP Sublayer . 13
6.4 SDAP Sublayer . 13
7 RRC related aspects. 13
7.1 System information handling . 13
7.2 Measurements . 13
7.3 UE capability coordination . 14
7.4 Handling of combined MN/SN RRC messages. 14
7.5 SRB3 . 15
7.6 Split SRB . 15
7.7 SCG/MCG failure handling . 15
7.8 UE identities . 16
7.9 Inter-node Resource Coordination . 16
8 Bearer handling aspects . 16
8.1 QoS aspects . 16
8.2 Bearer type selection . 17
8.3 Bearer type change . 17
8.4 User data forwarding . 18
9 Security related aspects . 18
ETSI
---------------------- Page: 4 ----------------------
3GPP TS 37.340 version 15.2.0 Release 15 4 ETSI TS 137 340 V15.2.0 (2018-09)
10 Multi-Connectivity operation related aspects . 18
10.1 General . 18
10.2 Secondary Node Addition . 18
10.2.1 EN-DC . 18
10.2.2 MR-DC with 5GC . 20
10.3 Secondary Node Modification (MN/SN initiated) . 22
10.3.1 EN-DC . 22
10.3.2 MR-DC with 5GC . 26
10.4 Secondary Node Release (MN/SN initiated) . 29
10.4.1 EN-DC . 29
10.4.2 MR-DC with 5GC . 31
10.5 Secondary Node Change (MN/SN initiated) . 32
10.5.1 EN-DC . 32
10.5.2 MR-DC with 5GC . 35
10.6 PSCell change . 37
10.7 Inter-Master Node handover with/without Secondary Node change . 38
10.7.1 EN-DC . 38
10.7.2 MR-DC with 5GC . 39
10.8 Master Node to eNB/gNB Change . 41
10.8.1 EN-DC . 41
10.8.2 MR-DC with 5GC . 42
10.9 eNB/gNB to Master Node change . 43
10.9.1 EN-DC . 43
10.9.2 MR-DC with 5GC . 44
10.10 RRC Transfer . 45
10.10.1 EN-DC . 45
10.10.2 MR-DC with 5GC . 46
10.11 Secondary RAT data volume reporting . 48
10.11.1 EN-DC . 48
10.12 Activity Notification. 49
10.12.1 EN-DC . 49
11 Service related aspects. 49
11.1 Roaming and Access Restrictions . 49
12 X2/Xn Interface related aspects . 49
Annex A (informative): Layer 2 handling for bearer type change . 50
Annex B (informative): Change history . 51
History . 55
ETSI
---------------------- Page: 5 ----------------------
3GPP TS 37.340 version 15.2.0 Release 15 5 ETSI TS 137 340 V15.2.0 (2018-09)
Foreword
This Technical Specification has been produced by the 3rd Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
Y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
Z the third digit is incremented when editorial only changes have been incorporated in the document.
ETSI
---------------------- Page: 6 ----------------------
3GPP TS 37.340 version 15.2.0 Release 15 6 ETSI TS 137 340 V15.2.0 (2018-09)
1 Scope
The present document provides an overview of the multi-connectivity operation using E-UTRA and NR radio access
technologies. Details of the network and radio interface protocols are specified in companion specifications of the 36
and 38 series.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document.
[1] 3GPP TR 21.905: "Vocabulary for 3GPP Specifications".
[2] 3GPP TS 36.300: "Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal
Terrestrial Radio Access Network (E-UTRAN); Overall description; Stage 2".
[3] 3GPP TS 38.300: "NR; NR and NG-RAN Overall description; Stage 2".
[4] 3GPP TS 38.331: "NR; Radio Resource Control (RRC) protocol specification".
[5] 3GPP TS 38.423: "NG-RAN; Xn application protocol (XnAP)".
[6] 3GPP TS 38.425: "NG-RAN; NR user plane protocol".
[7] 3GPP TS 38.401: "NG-RAN; Architecture description".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in 3GPP TR 21.905 [1] and the following
apply. A term defined in the present document takes precedence over the definition of the same term, if any, in 3GPP
TR 21.905 [1] and 3GPP TS 36.300 [2].
En-gNB: node providing NR user plane and control plane protocol terminations towards the UE, and acting as
Secondary Node in EN-DC.
Master Cell Group: in MR-DC, a group of serving cells associated with the Master Node, comprising of the SpCell
(Pcell) and optionally one or more Scells.
Master node: A Master eNB (in EN-DC), Master ng-eNB (in NGEN-DC) or a Master gNB (in NE-DC).
MCG bearer: in MR-DC, a radio bearer with an RLC bearer only in the MCG.
MN terminated bearer: in MR-DC, a radio bearer for which PDCP is located in the MN.
MCG SRB: in MR-DC, a direct SRB between the MN and the UE.
Multi-RAT Dual Connectivity: Dual Connectivity between E-UTRA and NR nodes.
Ng-eNB: as defined in TS 38.300 [3].
PCell: SpCell of a master cell group.
ETSI
---------------------- Page: 7 ----------------------
3GPP TS 37.340 version 15.2.0 Release 15 7 ETSI TS 137 340 V15.2.0 (2018-09)
PSCell: SpCell of a secondary cell group.
RLC bearer: RLC and MAC logical channel configuration of a radio bearer in one cell group.
Secondary Cell Group: in MR-DC, a group of serving cells associated with the Secondary Node, comprising of the
SpCell (PSCell) and optionally one or more Scells.
Secondary node: An en-gNB (in EN-DC), Secondary ng-eNB (in NE-DC) or a Secondary gNB (in NGEN-DC).
SCG bearer: in MR-DC, a radio bearer with an RLC bearer only in the SCG.
SN terminated bearer: in MR-DC, a radio bearer for which PDCP is located in the SN.
SpCell: primary cell of a master or secondary cell group.
SRB3: in EN-DC and NGEN-DC, a direct SRB between the SN and the UE.
Split bearer: in MR-DC, a radio bearer with RLC bearers both in MCG and SCG.
Split SRB: in MR-DC, a SRB between the MN and the UE with RLC bearers both in MCG and SCG.
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in 3GPP TR 21.905 [1] and the following apply. An
abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in
3GPP TR 21.905 [1] and 3GPP TS 36.300 [2].
DC Intra-E-UTRA Dual Connectivity
EN-DC E-UTRA-NR Dual Connectivity
MCG Master Cell Group
MN Master Node
MR-DC Multi-RAT Dual Connectivity
NE-DC NR-E-UTRA Dual Connectivity
NGEN-DC NG-RAN E-UTRA-NR Dual Connectivity
SCG Secondary Cell Group
SN Secondary Node
4 Multi-RAT Dual Connectivity
4.1 General
4.1.1 Common MR-DC principles
Multi-RAT Dual Connectivity (MR-DC) is a generalization of the Intra-E-UTRA Dual Connectivity (DC) described in
36.300 [2], where a multiple Rx/Tx UE may be configured to utilise resources provided by two different nodes
connected via non-ideal backhaul, one providing E-UTRA access and the other one providing NR access. One node acts
as the MN and the other as the SN. The MN and SN are connected via a network interface and at least the MN is
connected to the core network.
NOTE 1: MR-DC is designed based on the assumption of non-ideal backhaul between the different nodes but can
also be used in case of ideal backhaul.
NOTE 2: All MR-DC normative text and procedures in this version of the specification show the aggregated node
case. The details about non-aggregated node for MR-DC operation are described in TS38.401[7].
4.1.2 MR-DC with the EPC
E-UTRAN supports MR-DC via E-UTRA-NR Dual Connectivity (EN-DC), in which a UE is connected to one eNB
that acts as a MN and one en-gNB that acts as a SN. The eNB is connected to the EPC via the S1 interface and to the
en-gNB via the X2 interface. The en-gNB might also be connected to the EPC via the S1-U interface and other en-gNBs
via the X2-U interface.
The EN-DC architecture is illustrated in Figure 4.1.2-1 below.
ETSI
---------------------- Page: 8 ----------------------
3GPP TS 37.340 version 15.2.0 Release 15 8 ETSI TS 137 340 V15.2.0 (2018-09)
Figure 4.1.2-1: EN-DC Overall Architecture
4.1.3 MR-DC with the 5GC
Editor's note: MR-DC with the 5GC is not complete and is targeted for completion in December 2018.
4.1.3.1 E-UTRA-NR Dual Connectivity
NG-RAN supports NG-RAN E-UTRA-NR Dual Connectivity (NGEN-DC), in which a UE is connected to one ng-eNB
that acts as a MN and one gNB that acts as a SN. The ng-eNB is connected to the 5GC and the gNB is connected to the
ng-eNB via the Xn interface.
4.1.3.2 NR-E-UTRA Dual Connectivity
NG-RAN supports NR-E-UTRA Dual Connectivity (NE-DC), in which a UE is connected to one gNB that acts as a
MN and one ng-eNB that acts as a SN. The gNB is connected to 5GC and the ng-eNB is connected to the gNB via the
Xn interface.
4.2 Radio Protocol Architecture
4.2.1 Control Plane
In MR-DC, the UE has a single RRC state, based on the MN RRC and a single C-plane connection towards the Core
Network. Figure 4.2.1-1 illustrates the Control plane architecture for MR-DC. Each radio node has its own RRC entity
(E-UTRA version if the node is an eNB or NR version if the node is a gNB) which can generate RRC PDUs to be sent
to the UE.
RRC PDUs generated by the SN can be transported via the MN to the UE. The MN always sends the initial SN RRC
configuration via MCG SRB (SRB1), but subsequent reconfigurations may be transported via MN or SN. When
transporting RRC PDU from the SN, the MN does not modify the UE configuration provided by the SN.
In EN-DC, at initial connection establishment SRB1 uses E-UTRA PDCP. After initial connection establishment MCG
SRBs (SRB1 and SRB2) can be configured by the network to use either E-UTRA PDCP or NR PDCP. A PDCP version
change (release of old PDCP and establish of new PDCP) of SRBs can be supported in either direction (i.e. from E-
UTRA PDCP to NR PDCP or viceversa) via a handover procedure (reconfiguration with mobility) or, for the initial
change from E-UTRA PDCP to NR PDCP, with a reconfiguration without mobility, when the network knows there is
no UL data in buffer and before the initial security activation. For EN-DC capable UEs, NR PDCP can be configured
for DRBs and SRBs also before EN-DC is configured.
If the SN is a gNB (i.e. for EN-DC and NGEN-DC), the UE can be configured to establish a SRB with the SN (SRB3)
to enable RRC PDUs for the SN to be sent directly between the UE and the SN. RRC PDUs for the SN can only be
transported directly to the UE for SN RRC reconfiguration not requiring any coordination with the MN. Measurement
reporting for mobility within the SN can be done directly from the UE to the SN if SRB3 is configured.
ETSI
---------------------- Page: 9 ----------------------
3GPP TS 37.340 version 15.2.0 Release 15 9 ETSI TS 137 340 V15.2.0 (2018-09)
Split SRB is supported for all MR-DC options, allowing duplication of RRC PDUs generated by the MN, via the direct
path and via the SN. Split SRB uses NR PDCP. This version of the specification does not support the duplication of
RRC PDUs generated by the SN via the MN and SN paths.
In EN-DC, the SCG configuration is kept in the UE during suspension. The UE releases the SCG configuration (but not
the radio bearer configuration) during resumption initiation.
Figure 4.2.1-1: Control plane architecture for EN-DC (left) and MR-DC with 5GC (right).
4.2.2 User Plane
In MR-DC, from a UE perspective, three bearer types exist: MCG bearer, SCG bearer and split bearer. These three
bearer types are depicted in Figure 4.2.2-1 for MR-DC with EPC (EN-DC) and in Figure 4.2.2-2 for MR-DC with 5GC
(NGEN-DC, NE-DC).
For EN-DC, the network can configure either E-UTRA PDCP or NR PDCP for MN terminated MCG bearers while NR
PDCP is always used for all other bearers.
In MR-DC with 5GC, NR PDCP is always used for all bearer types. In NGEN-DC, E-UTRA RLC/MAC is used in the
MN while NR RLC/MAC is used in the SN. In NE-DC, NR RLC/MAC is used in the MN while E-UTRA RLC/MAC
is used in the SN.
Figure 4.2.2-1: Radio Protocol Architecture for MCG, SCG and split bearers from a UE perspective in
MR-DC with EPC (EN-DC)
ETSI
---------------------- Page: 10 ----------------------
3GPP TS 37.340 version
...