ETSI TS 126 259 V15.0.0 (2018-10)

5G; Subjective test methodologies for the evaluation of immersive audio systems (3GPP TS 26.259 version 15.0.0 Release 15)

ETSI TS 126 259 V15.0.0 (2018-10)

Name:ETSI TS 126 259 V15.0.0 (2018-10)   Standard name:5G; Subjective test methodologies for the evaluation of immersive audio systems (3GPP TS 26.259 version 15.0.0 Release 15)
Standard number:ETSI TS 126 259 V15.0.0 (2018-10)   language:English language
Release Date:07-Oct-2018   technical committee:3GPP SA 4 - Codec
Drafting committee:   ICS number:
ETSI TS 126 259 V15.0.0 (2018-10)






TECHNICAL SPECIFICATION
5G;
Subjective test methodologies for the evaluation of immersive
audio systems
(3GPP TS 26.259 version 15.0.0 Release 15)

---------------------- Page: 1 ----------------------
3GPP TS 26.259 version 15.0.0 Release 15 1 ETSI TS 126 259 V15.0.0 (2018-10)



Reference
DTS/TSGS-0426259vf00
Keywords
5G
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at

If you find errors in the present document, please send your comment to one of the following services:

Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.

GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 26.259 version 15.0.0 Release 15 2 ETSI TS 126 259 V15.0.0 (2018-10)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 26.259 version 15.0.0 Release 15 3 ETSI TS 126 259 V15.0.0 (2018-10)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 5
Introduction . 5
1 Scope . 6
2 References . 6
3 Definitions . 6
4 (VOID) . 6
5 Test Methodologies for Immersive Audio Systems of TS 26.118 (Codec Quality Characterization
Test) . 6
5.1 Introduction . 6
5.2 Experimental Design . 7
5.3 Selection of Assessors . 7
5.4 Test Materials . 7
5.5 Content Presentation. 7
5.6 Listening Environment . 7
5.7 Listening System . 7
5.8 Listening Level . 7
5.9 Anchor/Reference Conditions . 7
5.10 Test Conditions . 7
5.11 Attributes . 8
5.12 Test Report and Presentation of Results . 8
6 Test Methodologies for Immersive Audio Systems of TS 26.118 (Renderer Comparison Test) . 8
6.1 Introduction . 8
6.2 Experimental Design . 8
6.3 Selection of Assessors . 8
6.4 Test Materials . 8
6.5 Content Presentation. 9
6.6 Listening Environment . 10
6.7 Listening System . 10
6.8 Listening Level . 11
6.9 Anchor/Reference Conditions . 11
6.10 Test Conditions . 11
6.11 Attributes . 11
6.12 Test Report and Presentation of Results . 11
7 Test Methodologies for Immersive Audio Systems of TS 26.118 (Codec Quality Characterization
Test with Binaural Rendering) . 12
7.1 Introduction . 12
7.2 Experimental Design . 12
7.3 Selection of Assessors . 12
7.4 Test Materials . 12
7.5 Content Presentation. 12
7.6 Listening Environment . 12
7.7 Listening System . 12
7.8 Listening Level . 13
7.9 Anchor/Reference Conditions . 13
7.10 Test Conditions . 13
7.11 Attributes . 13
7.12 Test Report and Presentation of Results . 13
Annex A (informative): Change history . 14
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 26.259 version 15.0.0 Release 15 4 ETSI TS 126 259 V15.0.0 (2018-10)
History . 15

ETSI

---------------------- Page: 5 ----------------------
3GPP TS 26.259 version 15.0.0 Release 15 5 ETSI TS 126 259 V15.0.0 (2018-10)
Foreword
This Technical Specification has been produced by the 3rd Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
Introduction
Audio is a key component of an immersive multimedia experience and 3GPP systems are expected to deliver immersive
audio with a high Quality of Experience. However, industry agreed methods to assess the Quality of Experience for
immersive audio are relatively few and this Technical Specification seeks to address this gap by providing subjective
test methods for the assessment of immersive audio.
ETSI

---------------------- Page: 6 ----------------------
3GPP TS 26.259 version 15.0.0 Release 15 6 ETSI TS 126 259 V15.0.0 (2018-10)
1 Scope
The present document specifies subjective test methodologies for 3GPP immersive audio systems including channel-
based, object-based, scene-based and hybrids of these formats. The subjective evaluation methods described in the
present document are applicable to audio capture, coding, transmission and rendering as indicated in their
corresponding clauses.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document.
[1] 3GPP TR 21.905: "Vocabulary for 3GPP Specifications".
[2] ITU-R Recommendation BS.1534-3: "Method for the subjective assessment of intermediate
quality level of audio systems".
[3] ITU-R Recommendation BS.1116-3: "Methods for the subjective assessment of small impairments
in audio systems".
[4] ITU-R Recommendation BS.2051-2: "Advance sound system for programme production".
[5] 3GPP TS 26.118: "3GPP Virtual reality profiles for streaming applications".
3 Definitions
For the purposes of the present document, the terms and definitions given in 3GPP TR 21.905 [1] and the following
apply. A term defined in the present document takes precedence over the definition of the same term, if any, in 3GPP
TR 21.905 [1].
4 (VOID)
This clause is left "Void" intentionally, since specific clauses of the present document have been used and referenced
during the characterization exercise related to the 3GPP Virtual Reality Audio profile; therefore, a clause renumbering
would misalign such specific references from other 3GPP specifications.
5 Test Methodologies for Immersive Audio Systems of
TS 26.118 (Codec Quality Characterization Test)
5.1 Introduction
This clause specifies the Codec Quality Characterization Test for the audio profiles in TS 26.118. The Codec Quality
Characterization Test is based on the test method defined in [2]. The Codec Quality Characterization Test assesses the
Basic Audio Quality attribute at different bit-rates for a given audio profile.
ETSI

---------------------- Page: 7 ----------------------
3GPP TS 26.259 version 15.0.0
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27