|
TECHNICAL SPECIFICATION
5G;
5GS;
User Equipment (UE) conformance specification;
Part 1: Common test environment
(3GPP TS 38.508-1 version 15.1.0 Release 15)
---------------------- Page: 1 ----------------------
3GPP TS 38.508-1 version 15.1.0 Release 15 1 ETSI TS 138 508-1 V15.1.0 (2018-10)
Reference
RTS/TSGR-0538508-1vf10
Keywords
5G
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
If you find errors in the present document, please send your comment to one of the following services:
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2018.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3GPP TS 38.508-1 version 15.1.0 Release 15 2 ETSI TS 138 508-1 V15.1.0 (2018-10)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 3 ----------------------
3GPP TS 38.508-1 version 15.1.0 Release 15 3 ETSI TS 138 508-1 V15.1.0 (2018-10)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 12
1 Scope . 13
2 References . 13
3 Definitions, symbols and abbreviations . 14
3.1 Definitions . 14
3.2 Symbols . 14
3.3 Abbreviations . 14
4 Common test environments . 15
4.1 Environmental conditions . 15
4.1.1 Temperature . 15
4.1.2 Voltage . 15
4.2 Common requirements of test equipment . 16
4.2.1 General functional requirements . 16
4.2.2 Minimum functional requirements . 17
4.2.2.1 Supported Cell Configuration . 17
4.2.2.1.1 Supported Channels for an E-UTRA cell (NSA mode only) . 17
4.2.2.1.2 Supported Channels for a NR cell . 17
4.2.2.1.1.1 Logical channels . 17
4.2.2.1.1.2 Transport channels . 17
4.2.2.1.1.3 Physical channels . 18
4.3 Reference test conditions . 18
4.3.1 Test frequencies . 18
4.3.1.0 General . 18
4.3.1.0A Mid test channel bandwidth . 18
4.3.1.0B Bandwidth part . 19
4.3.1.1 Test frequencies for NR operating bands in FR1 . 21
4.3.1.1.1 Operating bands in FR1 . 21
4.3.1.1.2 Intra-band CA in FR1 . 85
4.3.1.1.3 Inter-band CA in FR1 . 85
4.3.1.1.4 Operating bands for DC in FR1 . 85
4.3.1.1.5 Operating band combination for SUL in FR1 . 85
4.3.1.2 Test frequencies for NR operating bands in FR2 . 85
4.3.1.2.1 Operating bands in FR2 . 85
4.3.1.2.2 Intra-band CA in FR2 . 85
4.3.1.2.3 Inter-band CA in FR2 . 85
4.3.1.3 Test frequencies for NR operation with other radios . 85
4.3.1.3.1 Inter-band CA . 85
4.3.1.3.2 EN-DC (two bands) . 85
4.3.1.3.2.0 Default reference test frequencies for EN-DC combinations (two bands) . 85
4.3.1.3.2.1 Reference test frequencies for EN-DC combinations beginning with B1 . 87
4.3.1.3.2.2 to 4.3.1.3.2.24 FFS . 88
4.3.1.3.2.25 Reference test frequencies for EN-DC combinations beginning with B25 . 88
4.3.1.3.2.25.1 to 4.3.1.3.2.25.40 FFS . 88
4.3.1.3.2.25.41 Reference test frequencies for EN-DC combination DC_25A_n41A / DC_25A_n41A . 88
4.3.1.3.2.26 – 4.3.1.3.2.40 FFS . 88
4.3.1.3.2.41 Reference test frequencies for EN-DC combinations beginning with B41 . 88
4.3.1.3.2.41.1 . 88
4.3.1.3.2.41.2 to 4.3.1.3.2.41.40 FFS . 90
4.3.1.3.2.41.41 Reference test frequencies for EN-DC combination DC_(n)41AA / DC_(n)41AA . 90
4.3.1.3.2.41.41A Reference test frequencies for EN-DC combination DC_41A_n41A / DC_41A_n41A . 91
4.3.1.3.3 EN-DC (three bands) . 92
ETSI
---------------------- Page: 4 ----------------------
3GPP TS 38.508-1 version 15.1.0 Release 15 4 ETSI TS 138 508-1 V15.1.0 (2018-10)
4.3.1.3.4 EN-DC (four bands) . 92
4.3.1.3.5 EN-DC (five bands) . 92
4.3.2 Radio conditions . 92
4.3.2.1 FR1, normal propagation condition for connected . 92
4.3.2.2 FR2, condition for OTA . 92
4.3.3 Physical channel allocations . 92
4.3.3.1 E-UTRA . 92
4.3.3.2 NR . 92
4.3.3.2.1 Antennas . 92
4.3.3.2.2 Downlink physical channels and physical signals . 93
4.3.3.2.3 Mapping of downlink physical channels and signals to physical resources . 93
4.3.3.2.4 Uplink physical channels and physical signals . 93
4.3.3.2.5 Mapping of uplink physical channels and signals to physical resources . 93
4.3.4 Signal levels . 93
4.3.4.1 Signal levels for conducted testing . 93
4.3.4.1.1 Downlink signal levels . 93
4.3.4.2 Signal levels for OTA testing . 93
4.3.5 Standard test signals. 93
4.3.6 Physical layer parameters . 93
4.3.6.1 Downlink physical layer parameters . 93
4.3.6.1.1 Physical layer parameters for scheduling of PUSCH . 93
4.3.6.1.1.1 Physical layer parameters for DCI format 0_0. 93
4.3.6.1.1.2 Physical layer parameters for DCI format 0_1. 94
4.3.6.1.2 Physical layer parameters for scheduling of PDSCH . 95
4.3.6.1.2.1 Physical layer parameters for DCI format 1_0. 95
4.3.6.1.2.2 Physical layer parameters for DCI format 1_1. 96
4.3.6.1.3 Physical layer parameters for other purposes . 97
4.3.6.1.3.1 Physical layer parameters for DCI format 2_0. 97
4.3.6.1.3.2 Physical layer parameters for DCI format 2_1. 98
4.3.6.1.3.3 Physical layer parameters for DCI format 2_2. 98
4.3.6.1.3.4 Physical layer parameters for DCI format 2_3. 98
4.4 Reference system configurations . 99
4.4.1 Simulated network scenarios . 99
4.4.1.1 Standalone cell network scenarios . 99
4.4.1.1.1 Standalone E-UTRA single cell and multi cell network scenarios . 99
4.4.1.1.2 Standalone NR single cell network scenarios . 99
4.4.1.1.3 Standalone NR single mode multi cell network scenarios . 99
4.4.1.1.4 Standalone NR dual mode multi cell network scenarios . 100
4.4.1.1.5 Standalone NR 3GPP Inter-RAT network scenarios . 100
4.4.1.2 Non-standalone cell network scenarios . 100
4.4.1.2.1 Non-standalone E-UTRA single cell and NR single cell network scenarios . 100
4.4.1.2.2 Non-standalone E-UTRA single cell and NR single mode multi cell network scenarios . 100
4.4.1.2.3 Non-standalone E-UTRA single mode multi cell and NR single mode multi cell network
scenarios . 100
4.4.1.2.4 Non-standalone E-UTRA single cell and NR dual mode multi cell network scenarios . 101
4.4.2 Simulated cells . 101
4.4.3 Common parameters for simulated NR cells . 103
4.4.3.1 Common configurations of system information blocks . 104
4.4.3.1.1 Combinations of system information blocks for E-UTRA standalone, EN-DC and NGEN-DC . 104
4.4.3.1.2 Combinations of system information blocks for NR standalone and NE-DC . 104
4.5 Generic procedures . 104
4.5.1 General . 104
4.5.2 RRC_IDLE . 105
4.5.2.1 Initiation . 105
4.5.2.2 Procedures . 105
4.5.2.3 Specific message contents . 105
4.5.3 RRC_INACTIVE . 105
4.5.3.1 Initiation . 105
4.5.4 RRC_CONNECTED . 105
4.5.4.1 Initiation . 105
4.5.4.2 Procedures . 106
4.5.4.3 Specific message contents . 106
ETSI
---------------------- Page: 5 ----------------------
3GPP TS 38.508-1 version 15.1.0 Release 15 5 ETSI TS 138 508-1 V15.1.0 (2018-10)
4.5.5 UE Beamlock Test Function (UBF) . 107
4.5.5.1 Specific Message contents . 107
4.5.5.1.1 ACTIVATE BEAMLOCK for Tx Only . 107
4.5.5.1.2 ACTIVATE BEAMLOCK for Rx Only . 108
4.5.5.1.3 ACTIVATE BEAMLOCK for TxRx . 108
4.5.5.1.4 DEACTIVATE BEAMLOCK . 108
4.6 Default NG-RAN RRC message and information elements contents . 109
4.6.1 Contents of RRC messages . 109
– DLInformationTransfer . 109
– LocationMeasurementIndication . 109
– MIB . 110
– MeasurementReport . 110
– MobilityFromNRCommand . 110
– Paging . 111
– RRCReestablishment . 111
– RRCReestablishmentComplete . 111
– RRCReestablishmentRequest . 112
– RRCReconfiguration . 112
– RRCReconfigurationComplete . 113
– RRCReject . 113
– RRCRelease . 113
– RRCResume . 114
– RRCResumeRequest . 114
– RRCResumeRequest1 . 114
– SIB1 . 115
– SystemInformation . 115
– UECapabilityEnquiry . 115
– UECapabilityInformation . 116
– ULInformationTransfer . 116
4.6.2 System information blocks . 117
– SIB2 . 117
– SIB3 . 117
– SIB4 . 117
– SIB5 . 117
– SIB6 . 118
– SIB7 . 118
– SIB8 . 118
– SIB9 . 119
4.6.3 Radio resource control information elements . 119
– AdditionalSpectrumEmission . 119
– Alpha . 119
– AMF-Identifier . 119
– ARFCN-ValueEUTRA . 119
– ARFCN-ValueNR . 120
– BWP . 120
– BWP-Downlink . 120
– BWP-DownlinkCommon . 121
– BWP-DownlinkDedicated . 121
– BWP-Uplink . 121
– BWP-UplinkCommon .
...