ETSI TS 137 113 V15.4.0 (2018-10)

Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) Electromagnetic Compatibility (EMC) (3GPP TS 37.113 version 15.4.0 Release 15)

ETSI TS 137 113 V15.4.0 (2018-10)

Name:ETSI TS 137 113 V15.4.0 (2018-10)   Standard name:Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) Electromagnetic Compatibility (EMC) (3GPP TS 37.113 version 15.4.0 Release 15)
Standard number:ETSI TS 137 113 V15.4.0 (2018-10)   language:English language
Release Date:17-Oct-2018   technical committee:3GPP RAN 4 - Specification for radio performance
Drafting committee:   ICS number:
ETSI TS 137 113 V15.4.0 (2018-10)






TECHNICAL SPECIFICATION
Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS);
LTE;
E-UTRA, UTRA and GSM/EDGE;
Multi-Standard Radio (MSR) Base Station (BS)
Electromagnetic Compatibility (EMC)
(3GPP TS 37.113 version 15.4.0 Release 15)

---------------------- Page: 1 ----------------------
3GPP TS 37.113 version 15.4.0 Release 15 1 ETSI TS 137 113 V15.4.0 (2018-10)



Reference
RTS/TSGR-0437113vf40
Keywords
GSM,LTE,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at

If you find errors in the present document, please send your comment to one of the following services:

Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.

GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 37.113 version 15.4.0 Release 15 2 ETSI TS 137 113 V15.4.0 (2018-10)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 37.113 version 15.4.0 Release 15 3 ETSI TS 137 113 V15.4.0 (2018-10)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 5
1 Scope . 6
2 References . 6
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Test conditions . 11
4.1 General . 11
4.2 Arrangements for establishing a communication link . 11
4.2.1 Multiple enclosure BS solution . 12
4.3 Narrow band responses on receivers . 12
4.4 Exclusion bands . 13
4.4.1 Transmitter exclusion band . 13
4.4.2 Receiver exclusion band . 13
4.5 BS test configurations . 13
5 Performance assessment . 15
5.1 General . 15
5.2 Assessment of performance in Downlink . 16
5.3 Assessment of performance in Uplink . 16
5.4 Ancillary equipment . 16
6 Performance criteria . 16
6.1 Performance criteria for continuous phenomena for BS . 17
6.1.1 E-UTRA performance criteria . 17
6.1.2 UTRA performance criteria . 17
6.1.3 GSM/EDGE performance criteria . 18
6.1.3.1 GSM/EDGE downlink . 18
6.1.3.2 GSM/EDGE uplnik . 18
6.1.4 NB-IoT performance criteria . 18
6.2 Performance criteria for transient phenomena for BS . 19
6.3 Performance criteria for continuous phenomena for Ancillary equipment . 19
6.4 Performance criteria for transient phenomena for Ancillary equipment . 19
7 Applicability overview . 20
7.1 Emission . 20
7.2 Immunity . 20
8 Emission . 21
8.1 Test configurations . 21
8.2 Radiated emission from Base Station and ancillary equipment. 21
8.2.1 Radiated emission for Base Stations . 21
8.2.1.1 Definition . 21
8.2.1.2 Test method . 21
8.2.1.3 Limits . 22
8.2.1.4 Interpretation of the measurement results . 22
8.2.2 Radiated emission, ancillary equipment . 23
8.2.2.1 Definition . 23
8.2.2.2 Test method . 23
8.2.2.3 Limits . 23
8.3 Conducted emission DC power input/output port . 23
8.3.1 Definition . 24
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 37.113 version 15.4.0 Release 15 4 ETSI TS 137 113 V15.4.0 (2018-10)
8.3.2 Test method . 24
8.3.3 Limits . 24
8.4 Conducted emissions, AC mains power input/output port . 24
8.4.1 Definition . 24
8.4.2 Test method . 24
8.4.3 Limits . 24
8.5 Harmonic current emissions (AC mains input port) . 25
8.6 Voltage fluctuations and flicker (AC mains input port) . 25
8.7 Telecommunication ports . 25
8.7.1 Definition . 25
8.7.2 Test method . 25
8.7.3 Limits . 25
9 Immunity . 26
9.1 Test configurations . 26
9.2 RF electromagnetic field (80 MHz - 6000 MHz) . 27
9.2.1 Definition . 27
9.2.2 Test method and level . 27
9.2.3 Performance criteria . 27
9.3 Electrostatic discharge . 27
9.3.1 Definition . 27
9.3.2 Test method and level . 27
9.3.3 Performance criteria . 27
9.4 Fast transients common mode . 28
9.4.1 Definition . 28
9.4.2 Test method and level . 28
9.4.3 Performance criteria . 28
9.5 RF common mode (0,15 MHz - 80 MHz) . 28
9.5.1 Definition . 29
9.5.2 Test method and level . 29
9.5.3 Performance criteria . 29
9.6 Voltage dips and interruptions . 29
9.6.1 Definition . 29
9.6.2 Test method and level . 29
9.6.3 Performance criteria . 30
9.7 Surges, common and differential mode . 30
9.7.1 Definition . 30
9.7.2 Test method and level . 30
9.7.2.1 Test method for telecommunication ports directly connected to outdoor cables . 30
9.7.2.2 Test method for telecommunication ports connected to indoor cables . 31
9.7.2.3 Test method for AC power ports . 31
9.7.3 Performance criteria . 31
Annex A (normative): BER assessment for GSM/EDGE . 32
A.1 Assessment of BER at the output of a transmitter . 32
A.1.1 Assessment of BER using static layer 1 functions . 32
A.1.2 Assessment of BER using RXQUAL . 32
A.2 Assessment of BER at the output of a receiver . 32
A.2.1 Assessment of BER using RXQUAL . 32
A.2.2 Assessment of BER using reported BER . 32
Annex B (informative): Change history . 33
History . 35

ETSI

---------------------- Page: 5 ----------------------
3GPP TS 37.113 version 15.4.0 Release 15 5 ETSI TS 137 113 V15.4.0 (2018-10)
Foreword
rd
This Technical Specification has been produced by the 3 Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
ETSI

---------------------- Page: 6 ----------------------
3GPP TS 37.113 version 15.4.0 Release 15 6 ETSI TS 137 113 V15.4.0 (2018-10)
1 Scope
The present document covers the assessment of E-UTRA, UTRA, GSM/EDGE and NB-IoT Multi-Standard Radio
(MSR) Base Stations and associated ancillary equipment in respect of Electromagnetic Compatibility (EMC).
The present document specifies the applicable test conditions, performance assessment and performance criteria for E-
UTRA, UTRA, GSM/EDGE and NB-IoT Base Stations and associated ancillary equipment in one of the following
categories:
- Multi-Standard Radio (MSR) Base Stations for E-UTRA, UTRA and GSM/EDGE meeting the requirements of
TS 37.104 [6], with conformance demonstrated by compliance to TS 37.141 [11].
- Base Stations for E-UTRA meeting the requirements of TS 36.104 [4], with conformance demonstrated by
compliance to TS 36.141 [9].
- Base Stations for UTRA FDD meeting the requirements of TS 25.104 [2], with conformance demonstrated by
compliance to TS 25.141 [7].
- Base Stations for UTRA TDD meeting the requirements of TS 25.105 [3], with conformance demonstrated by
compliance to TS 25.142 [8].
- Base Stations for GSM/EDGE meeting the requirements of TS 45.005 [5], with conformance demonstrated by
compliance to TS 51.021 [10].
- Base Stations for NB-IoT meeting the requirements of TS 36.104 [4], with conformance demonstrated by
compliance to TS 36.141 [9].
In addition to MSR base stations, the present document covers other BS supporting more than one RAT.
Technical requirements related to the antenna port of Base Stations are not included in the present document. These are
found in the relevant product standards [2-11].
The environment classification used in the present document refers to the residential, commercial, and light industrial
environment classification used in IEC 61000-6-1 [12] and IEC 61000-6-3 [13].
The EMC requirements have been selected to ensure an adequate level of compatibility for apparatus at residential,
commercial and light industrial environments. The levels, however, do not cover extreme cases which may occur in any
location but with low probability of occurrence.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document.
[1] 3GPP TR 21.905: "Vocabulary for 3GPP Specifications".
[2] 3GPP TS 25.104: "Base Station (BS) radio transmission and reception (FDD)".
[3] 3GPP TS 25.105: "Base Station (BS) radio transmission and reception (TDD)".
[4] 3GPP TS 36.104: "Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS)
radio transmission and reception ".
[5] 3GPP TS 45.005: "Radio transmission and reception".
ETSI

---------------------- Page: 7 ----------------------
3GPP TS 37.113 version 15.4.0 Release 15 7 ETSI TS 137 113 V15.4.0 (2018-10)
[6] 3GPP TS 37.104: "E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station
(BS) radio transmission and reception".
[7] 3GPP TS 25.141: "Base Station (BS) conformance testing (FDD)".
[8] 3GPP TS 25.142: "Base Station (BS) conformance testing (TDD)".
[9] 3GPP TS 36.141: "Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS)
conformance testing".
[10] 3GPP TS 51.021: "Base Station System (BSS) equipment specification; Radio aspects".
[11] 3GPP TS 37.141: "E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station
(BS) conformance testing"
[12] IEC 61000-6-1: 2005: "Electromagnetic compatibility (EMC) - Part 6: Generic standards –
Section 1: Immunity for residential, commercial and light-industrial environments".
[13] IEC 61000-6-3: 2006/AMD1:2010: "Electromagnetic compatibility (EMC) - Part 6: Generic
standards – Section 3: Emission standard for residential, commercial and light industrial
environments".
[14] IEC 60050-161: "International Electrotechnical Vocabulary - Chapter 161: Electromagnetic
compatibility".
[15] ITU-R Recommendation SM.329: "Unwanted emissions in the spurious domain".
[16] ITU-R Recommendation SM.1539 (2001): "Variation of the boundary between the out-of-band
and spurious domains required for the application of Recommendations ITU-R SM.1541 and ITU-
R SM.329".
[17] Void
[18] CISPR 16-1-1: "Specification for radio disturbance and immunity measuring apparatus and
methods - Measuring apparatus".
[19] IEC 61000-3-2 (2004): "Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2: Limits
for harmonic current emissions (equipment input current ≤ 16 A)".
[20] IEC 61000-3-12 (2005): "Electromagnetic compatibility (EMC) - Part 3-12: Limits- Limits for
harmonic current produced by equipment connected to public low-voltage system with input
current >16 A and ≤ 75 A".
[21] IEC 61000-3-3 (2002): "Electromagnetic compatibility (EMC) - Part 3: Limits - Section 3:
Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with
rated current ≤ 16 A".
[22] IEC 61000-3-11 (2000): "Electromagnetic compatibility (EMC) - Part 3-11: Limits –Limitation of
voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current ≤
75 A and subject to conditional connections".
[23] IEC 61000-4-3: "Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques - Section 3: Radiated, radio-frequency electromagnetic field immunity test".
[24] IEC 61000-4-2: "Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques - Section 2: Electrostatic discharge immunity test".
[25] IEC 61000-4-4: "Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques - Section 4: Electrical fast transient/burst immunity test".
[26] IEC 61000-4-6: "Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques - Section 6: Immunity to contacted disturbances, induced by radio frequency fields".
[27] IEC 61000-4-11: "Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques - Section 11: Voltage dips, short interruptions and voltage variations. Immunity tests".
ETSI

---------------------- Page: 8 ----------------------
3GPP TS 37.113 version 15.4.0 Release 15 8 ETSI TS 137 113 V15.4.0 (2018-10)
[28] IEC 61000-4-5: "Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques - Section 5: Surge immunity test".
[29] 3GPP TS 25.101: "User Equipment (UE) radio transmission and reception (FDD) ".
[30] 3GPP TS 25.102: "User Equipment (UE) radio transmission and reception (TDD)".
[31] 3GPP TS 36.101: "Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE)
radio transmission and reception".
[32] 3GPP TS 45.008: "Radio subsystem link control".
[33] 3GPP TS 51.010-1: " Mobile Station (MS) conformance specification; Part 1: Conformance
specification".
[34] CISPR 32: "Electromagnetic compatibility of multimedia equipment - Emission requirements".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in TR 21.905 [x] and the following apply. A
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27