|
TECHNICAL SPECIFICATION
Universal Mobile Telecommunications System (UMTS);
LTE;
Evolved Universal Terrestrial Radio Access (E-UTRA);
Relay conformance testing
(3GPP TS 36.117 version 15.0.0 Release 15)
---------------------- Page: 1 ----------------------
3GPP TS 36.117 version 15.0.0 Release 15 1 ETSI TS 136 117 V15.0.0 (2018-11)
Reference
RTS/TSGR-0436117vf00
Keywords
LTE,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
If you find errors in the present document, please send your comment to one of the following services:
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2018.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3GPP TS 36.117 version 15.0.0 Release 15 2 ETSI TS 136 117 V15.0.0 (2018-11)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 3 ----------------------
3GPP TS 36.117 version 15.0.0 Release 15 3 ETSI TS 136 117 V15.0.0 (2018-11)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 7
1 Scope . 8
2 References . 8
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 9
3.3 Abbreviations . 9
4. General test conditions and declarations . 10
4.1 Measurement uncertainties and Test Requirements . 10
4.1.1 General . 10
4.1.2 Acceptable uncertainty of Test System . 11
4.1.2.1 Measurement of relay access transmitter . 11
4.1.2.2 Measurement of relay access receiver . 11
4.1.2.3 Measurement of performance requirement . 11
4.2 Relay classes . 11
4.3 Regional requirements . 11
4.4 Selection of configurations for testing. 11
4.5 Manufacturer's declarations of regional and optional requirements . 11
4.6 Specified frequency range and supported channel bandwidth . 12
4.7 Format and interpretation of tests . 12
5 Operating bands and Channel arrangement . 12
5.1 General . 12
5.2 Operating bands . 12
5.3 Channel bandwidth . 12
5.4 Channel arrangement . 13
6. Transmitter characteristics . 13
6.1 General . 13
6.1.1 E-UTRA Test Models . 13
6.2 Output power . 13
6.2.1 Definition and applicability . 13
6.2.2 Minimum Requirement . 14
6.2.3 Test purpose . 14
6.2.4 Method of test . 14
6.2.5 Test Requirements . 14
6.2.6 Configured transmitted Power for backhaul link . 15
6.3 Output power dynamics . 16
6.3.1 Access Link Test Requirements. . 16
6.3.1.1 RE Power control dynamic range . 16
6.3.1.2 Total power dynamic range . 16
6.3.1.3 Transmitter OFF power . 16
6.3.1.4 Transmitter transient period . 16
6.3.2 Backhaul Link Test Requirements . 16
6.3.2.1 Minimum Output Power . 16
6.3.2.1.1 Test purpose . 16
6.3.2.1.2 Test applicability . 16
6.3.2.1.3 Minimum conformance requirements . 16
6.3.2.1.4 Test description . 17
6.3.2.1.5 Test Requirement. 17
6.3.2.2 Power Control Absolute power tolerance . 17
6.3.2.3 Power Control Relative power tolerance . 17
ETSI
---------------------- Page: 4 ----------------------
3GPP TS 36.117 version 15.0.0 Release 15 4 ETSI TS 136 117 V15.0.0 (2018-11)
6.3.2.4 Aggregate power control tolerance . 17
6.3.2.5 Power Control for UL-MIMO . 17
6.3.2.6 Transmit ON/OFF Time Mask . 17
6.3.2.7 Transmit OFF Power . 18
6.3.2.7.1 Minimum requirement . 18
6.3.2.7.2 Test requirement . 18
6.4 Transmitted signal quality . 18
6.4.1 Frequency error . 18
6.4.1.1 Definition and applicability . 18
6.4.1.2 Minimum Requirement . 18
6.4.1.3 Test purpose . 18
6.4.1.4 Method of test . 18
6.4.1.5 Test requirement . 18
6.4.2 EVM . 19
6.4.3 Time alignment error . 19
6.4.4 DL RS power . 19
6.5 Unwanted emissions . 19
6.5.1 Transmitter spurious emis sions . 19
6.5.2 Adjacent Channel Leakage power Ratio (ACLR) . 19
6.5.3 Operating Bands Unwanted Emissions . 20
6.5.3.1 Definition and applicability . 20
6.5.3.2 Minimum Requirement . 20
6.5.3.3 Test purpose . 20
6.5.3.4 Method of test . 20
6.5.3.5 Test Requirement . 20
6.6 Transmitter intermodulation . 23
7. Receiver characteristics . 23
7.1 General . 23
7.2 Reference sensitivity level . 23
7.2.1 Backhaul link reference sensitivity . 23
7.2.1.1 Test requirement . 23
7.2.2 Access link reference sensitivity . 24
7.3 Dynamic range . 24
7.3.1 Backhaul link Maximum Input Level . 24
7.3.2 Access link Receiver Dynamic Range . 24
7.4 In-channel selectivity . 24
7.5 Adjacent Channel Selectivity (ACS) . 24
7.5.1 Backhaul Adjacent Channel Selectivity (ACS) . 24
7.5.2 Access Link Adjacent Channel Selectivity (ACS) . 24
7.6 Blocking characteristics . 24
7.6.1 Backhaul Blocking Characteristics . 24
7.6.2 Access Link Blocking Characteristics . 24
7.6.3 Blocking requirements for co-location . 25
7.7 Receiver spurious emissions. 25
7.7.1 Backhaul Link Receiver Spurious Emissions . 25
7.7.2 Access Link Receiver Spurious Emissions . 25
7.8 Receiver intermodulation . 25
7.8.1 Backhaul Link Receiver Intermodulation . 25
7.8.2 Access Link Receiver Intermodulation . 25
8. Access Performance requirement . 25
8.1 General . 25
8.2 Performance requirements for PUSCH . 26
8.2.1 Requirements in multipath fading propagation conditions . 26
8.2.2 Requirements for UL timing adjustment . 26
8.2.3 Requirements for HARQ-ACK multiplexed on PUSCH . 26
8.3 Performance requirements for PUCCH . 26
8.3.1 ACK missed detection requirements for single user PUCCH format 1a . 26
8.3.2 CQI missed detection requirements for PUCCH format2 . 26
8.3.3 ACK missed detection requirements for multi user PUCCH format 1a . 27
8.4 Performance requirements for PRACH . 27
ETSI
---------------------- Page: 5 ----------------------
3GPP TS 36.117 version 15.0.0 Release 15 5 ETSI TS 136 117 V15.0.0 (2018-11)
8.4.1 PRACH false alarm probability and missed detection . 27
9. Backhaul Performance requirement . 27
9.1 General . 27
9.2 Demodulation of PDSCH (Cell-Specific Reference Symbols) . 27
9.3 Demodulation of PDSCH (User-Specific Reference Symbols). 27
9.4 Demodulation of PDCCH/PCFICH . 27
9.5 Demodulation of PHICH . 27
9.6 Demodulation of PBCH . 28
9.7 Sustained downlink data rate provided by lower layers . 28
9.8 Demodulation of R-PDCCH. 28
9.8.1 FDD . 28
9.8.1.1 FDD R-PDCCH performance based on UE-specific reference signals transmitted on antenna port
7 with 1x2 antenna configuration . 28
9.8.1.1.1 Test purpose . 28
9.8.1.1.2 Test applicability . 28
9.8.1.1.3 Minimum conformance requirements . 28
9.8.1.1.4 Test description . 29
9.8.1.1.4.1 Initial conditions . 29
9.8.1.1.4.2 Test procedure . 30
9.8.1.1.4.3 Message contents . 30
9.8.1.1.5 Test requirement . 32
9.8.1.2 FDD R-PDCCH performance based on UE-specific reference signals transmitted on antenna port
7 with 4x2 antenna configuration . 33
9.8.1.2.1 Test purpose . 33
9.8.1.2.2 Test applicability . 33
9.8.1.2.3 Minimum conformance requirements . 33
9.8.1.2.4 Test description . 34
9.8.1.2.4.1 Initial conditions . 34
9.8.1.2.4.2 Test procedure . 35
9.8.1.2.4.3 Message contents . 35
9.8.1.2.5 Test requirement . 38
9.8.2 TDD . 38
9.8.2.1 TDD R-PDCCH performance based on UE-specific reference signals transmitted on antenna port
7 with 1x2 antenna configuration . 38
9.8.2.1.1 Test purpose . 38
9.8.2.1.2 Test applicability . 38
9.8.2.1.3 Minimum conformance requirements . 38
9.8.2.1.4 Test description . 39
9.8.2.1.4.1 Initial conditions . 39
9.8.2.1.4.2 Test procedure . 40
9.8.2.1.4.3 Message contents . 40
9.8.2.1.5 Test requirement . 42
9.8.2.2 TDD R-PDCCH performance based on UE-specific reference signals transmitted on antenna port
7 with 4x2 antenna configuration . 43
9.8.2.2.1 Test purpose . 43
9.8.2.2.2 Test applicability . 43
9.8.2.2.3 Minimum conformance requirements .
...