ETSI TS 136 116 V15.0.0 (2018-11)

LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Relay radio transmission and reception (3GPP TS 36.116 version 15.0.0 Release 15)

ETSI TS 136 116 V15.0.0 (2018-11)

Name:ETSI TS 136 116 V15.0.0 (2018-11)   Standard name:LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Relay radio transmission and reception (3GPP TS 36.116 version 15.0.0 Release 15)
Standard number:ETSI TS 136 116 V15.0.0 (2018-11)   language:English language
Release Date:11-Nov-2018   technical committee:3GPP RAN 4 - Specification for radio performance
Drafting committee:   ICS number:
ETSI TS 136 116 V15.0.0 (2018-11)






TECHNICAL SPECIFICATION
LTE;
Evolved Universal Terrestrial Radio Access (E-UTRA);
Relay radio transmission and reception
(3GPP TS 36.116 version 15.0.0 Release 15)

---------------------- Page: 1 ----------------------
3GPP TS 36.116 version 15.0.0 Release 15 1 ETSI TS 136 116 V15.0.0 (2018-11)



Reference
RTS/TSGR-0436116vf00
Keywords
LTE
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at

If you find errors in the present document, please send your comment to one of the following services:

Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners

GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 36.116 version 15.0.0 Release 15 2 ETSI TS 136 116 V15.0.0 (2018-11)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 36.116 version 15.0.0 Release 15 3 ETSI TS 136 116 V15.0.0 (2018-11)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 6
1 Scope . 7
2 References . 7
3 Definitions, symbols and abbreviations . 7
3.1 Definitions . 7
3.2 Symbols . 8
3.3 Abbreviations . 8
4 General . 9
4.1 Relationship between minimum requirements and test requirements . 9
4.2 Relay classes . 9
4.3 Regional requirements . 9
5 Operating bands and channel arrangement . 10
5.1 General . 10
5.2 Operating bands . 10
5.3 Channel bandwidth . 10
5.4 Channel arrangement . 10
6 Transmitter characteristics . 10
6.1 General . 10
6.2 Output power . 11
6.2.1 Maximum output power . 11
6.2.1.1 Minimum requirement . 11
6.2.2 Configured transmitted Power for backhaul link . 11
6.2.2.1 Minimum requirement . 12
6.3 Output power dynamics . 12
6.3.1 Minimum output power . 12
6.3.1.1 Minimum requirement . 12
6.3.2 ON/OFF time mask and transmitter OFF power. 12
6.3.3 Power control . 13
6.4 Transmitted signal quality . 13
6.4.1 Frequency error . 13
6.4.1.1 Minimum requirement . 13
6.4.2 EVM . 13
6.4.3 Time alignment error . 13
6.4.4 DL RS power . 13
6.5 Unwanted emissions . 13
6.5.1 Transmitter spurious emis sions . 14
6.5.2 Adjacent Channel Leakage power Ratio (ACLR) . 14
6.5.3 Operating band unwanted emissions . 14
6.5.3.1 Minimum requirements . 14
6.6 Transmitter intermodulation . 15
7 Receiver characteristics . 16
7.1 General . 16
7.2 Reference sensitivity level . 16
7.2.1 Backhaul link reference sensitivity . 16
7.2.1.1 Minimum requirement . 16
7.2.2 Access link reference sensitivity . 16
7.2.2.1 Minimum requirement . 16
7.3 Dynamic range . 17
7.3.1 Backhaul link maximum input level . 17
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 36.116 version 15.0.0 Release 15 4 ETSI TS 136 116 V15.0.0 (2018-11)
7.3.2 Access link Receiver Dynamic Range . 17
7.4 In-channel selectivity . 17
7.4.1 Access link in-channel selectivity . 17
7.5 Adjacent Channel Selectivity (ACS) . 17
7.5.1 Backhaul link Adjacent Channel Selectivity . 17
7.5.1.1 Minimum requirement . 17
7.5.2 Access link Adjacent Channel Selectivity . 18
7.6 Blocking characteristics . 18
7.6.1 Backhaul link blocking characteristics . 18
7.6.1.1 Minimum requirement . 18
7.6.2 Access link blocking characteristics . 19
7.6.3 Blocking requirements for co-location . 19
7.7 Receiver spurious emissions. 20
7.8 Receiver intermodulation . 20
7.8.1 Backhaul link receiver intermodulation . 20
7.8.1.1 Minimum requirement . 20
7.8.2 Access link receiver intermodulation . 20
8 Access Performance requirement . 21
8.1 General . 21
8.2 Performance requirements for PUSCH . 21
8.2.1 Requirements in multipath fading propagation conditions . 21
8.2.2 Requirements for UL timing adjustment . 21
8.2.3 Requirements for HARQ-ACK multiplexed on PUSCH . 21
8.3 Performance requirements for PUCCH . 21
8.3.1 DTX to ACK performance . 21
8.3.2 ACK missed detection requirements for single user PUCCH format 1a . 21
8.3.3 CQI missed detection requirements for PUCCH format 2 . 21
8.3.4 ACK missed detection requirements for multi user PUCCH format 1a . 21
8.4 Performance requirements for PRACH . 22
8.4.1 PRACH False alarm probability . 22
8.4.2 PRACH detection requirements . 22
9 Backhaul Performance requirement . 22
9.1 General . 22
9.2 Demodulation of PDSCH (Cell-Specific Reference Symbols) . 22
9.3 Demodulation of PDSCH (User-Specific Reference Symbols). 22
9.4 Demodulation of PDCCH/PCFICH . 22
9.5 Demodulation of PHICH . 22
9.6 Demodulation of PBCH . 22
9.7 Sustained downlink data rate provided by lower layers . 22
9.8 Demodulation of R-PDCCH. 23
9.8.1 R-PDCCH format without cross-interleaving . 23
9.8.1.1 FDD. 23
9.8.1.2 TDD . 24
Annex A: Propagation models for relay demodulation requirements . 26
A.1 Propagation models for backhaul link . 26
A.1.1 Delay Profiles . 26
A.1.1.1 LOS between eNB and relay. 26
A.1.1.2 NLOS between eNB and relay . 26
A.1.2 Doppler Frequency . 27
A.1.3 MIMO Correlation Matrices. 27
A.2 Multipath propagation fading conditions for access link . 27
Annex B: Reference Measurement Channel. 29
B.1 Reference measurement channels for R-PDCCH performance requirements . 29
B.1.1 R-PDCCH format without cross-interleaving . 29
B.1.1.1 FDD . 29
B.1.1.2 TDD . 29
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 36.116 version 15.0.0 Release 15 5 ETSI TS 136 116 V15.0.0 (2018-11)
B.2 OCNG patterns for R-PDCCH performance requirements . 29
B.2.1 FDD . 30
B.2.1.1 OCNG FDD pattern 1for R-PDCCH . 30
B.2.2 TDD . 30
B.2.2.1 OCNG TDD pattern 1for R-PDCCH . 30
Annex C: Change history . 32
History . 33

ETSI

---------------------- Page: 6 ----------------------
3GPP TS 36.116 version 15.0.0 Release 15 6 ETSI TS 136 116 V15.0.0 (2018-11)
Foreword
rd
This Technical Specification has been produced by the 3 Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
Y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
ETSI

---------------------- Page: 7 ----------------------
3GPP TS 36.116 version 15.0.0 Release 15 7 ETSI TS 136 116 V15.0.0 (2018-11)
1 Scope
The present document establishes the minimum RF characteristics and minimum performance requirements of E-UTRA
Relay.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document.
[1] 3GPP TR 21.905: “Vocabulary for 3GPP Specifications”.
[2] 3GPP TS 36.101: “User Equipment (UE) radio transmission and reception”
[3] 3GPP TS 36.104: “Base Station (BS) radio transmission and reception”
[4] ITU-R Recommendation SM.329-10, “Unwanted emissions in the spurious domain”.
[5] ITU-R Recommendation M.1545: “Measurement uncertainty as it applies to test limits for the
terrestrial component of International Mobile Telecommunications-2000”.
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in TR 21.905 [x] and the following apply. A
term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 [x].
Access link: Link for communication between Relay and UE.
Backhaul link: Link for communication between Relay and BS.
Carrier: The modulated waveform conveying the E-UTRA or UTRA physical channels
Channel bandwidth: The RF bandwidth supporting a single E-UTRA RF carrier with the transmission bandwidth
configured in the uplink or downlink of a cell. The channel bandwidth is measured in MHz and is used as a reference
for transmitter and receiver RF requirements.
Channel edge: The lowest and highest frequency of the E-UTRA carrier, separated by the channel bandwidth.
In-band relay: A Relay where the access link and backhaul link operates in the same operating band.
Measurement bandwidth: The bandwidth in which an emission level is specified.
Occupied bandwidth: The width of a frequency band such that, below the lower and above the upper frequency limits,
the mean powers emitted are each equal to a specified percentage β/2 of the total mean power of a given emission.
RRC filtered mean power: The mean power of a UTRA carrier as measured through a root raised cosine filter with
roll-off factor α and a bandwidth equal to the chip rate of the radio access mode.
NOTE 1: The RRC filtered mean power of a perfectly modulated UTRA signal is 0.246 dB lower than the mean
power of the same signal.
ETSI

---------------------- Page: 8 ----------------------
3GPP TS 36.116 version 15.0.0 Release 15 8 ETSI TS 136 116 V15.0.0 (2018-11)
Transmission bandwidth: Bandwidth of an instantaneous transmission from a UE or BS, measured in Resource Block
units.
Transmission bandwidth configuration: The highest transmission bandwidth allowed for uplink or downlink in a
given channel bandwidth, measured in Resource Block units.
3.2 Symbols
Void
3.3 Abbreviations
For the purposes of the present document, the abbreviations given in TR 21.905 [x] and the following apply. An
abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in
TR 21.905 [x].
ACLR Adjacent Channel Leakage Ratio
ACK Acknowledgement (in HARQ protocols)
ACS Adjacent Channel Selectivity
AWGN Additive White Gaussian Noise
BS Base Station
CP Cyclic prefix
CRC Cyclic Redundancy Check
CW Continuous Wave
DC Direct Current
DFT Discrete Fourier Transformation
DTX Discontinuous Transmission
DwPTS Downlink part of the special subframe (for TDD operation)
EARFCN E-UTRA Absolute Radio Frequency Channel Number
EPA Extended Pedestrian A model
ETU Extended Typical Urban model
E-UTRA Evolved UTRA
EVA Extended Vehicular A model
EVM Error Vector Magnitude
FDD Frequency Division Duplex
FFT Fast Fourier Transformation
FRC Fixed Reference Channel
GP Guard Period (for TDD operation)
HARQ Hybrid Automatic Repeat Request
HD-FDD Half- Duplex FDD
ICS In-Channel Selectivity
ITU-R Radiocommunication Sector of the ITU
LA Local Area
MCS Modulation and Coding Scheme
OFDM Orthogonal Frequency Division Multiplex
OOB Out-of-band
PA Power Amplifier
PBCH Physical Broadcast Channel
PDCCH Physical Downlink Control Channel
PDSCH Physical Downlink Shared Channel
PUSCH Physical Uplink Shared Channel
PUCCH Physical Uplink Control Channel
PRACH Physical Random Access Channel
PSS Primary Synchronization Signal
QAM Quadrature Amplitude Modulation
QPSK Quadrature Phase-Shift Keying
RAT Radio Access Technology
RB Resource Block
RE Resource Element
REFSENS Reference Sensitivity power level
RF Radio Frequency
RMS Root Mean Square (value)
ETSI

---------------------- Page: 9 ----------------------
3GPP TS 36.116 version 15.0.0 Release 15 9 ETSI TS 136 116 V15.0.0 (2018-11)
R-PDCCH Relay Physical Downlink Control Channel
RS Reference Symbol
RX Receiver
RRC Root Raised Cosine
SNR Signal-to-Noise Ratio
SSS Secondary Synchronization Signal
TA Timing Advance
TDD Time Division Duplex
TX Transmitter
UE User Equipment
UMTS Universal Mobile Telecommunications System
UTRA UMTS Terrestrial Radio Access
UTRAN UMTS Terrestrial Radio Access Network
WA Wide Area

4 General
4.1 Relationship between minimum requirements and test
requirements
The Minimum Requirem
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27