ETSI TS 137 544 V14.7.0 (2018-12)

Universal Mobile Telecommunications System (UMTS); LTE; Universal Terrestrial Radio Access (UTRA) and Evolved UTRA (E-UTRA); User Equipment (UE) Over The Air (OTA) performance; Conformance testing (3GPP TS 37.544 version 14.7.0 Release 14)

ETSI TS 137 544 V14.7.0 (2018-12)

Name:ETSI TS 137 544 V14.7.0 (2018-12)   Standard name:Universal Mobile Telecommunications System (UMTS); LTE; Universal Terrestrial Radio Access (UTRA) and Evolved UTRA (E-UTRA); User Equipment (UE) Over The Air (OTA) performance; Conformance testing (3GPP TS 37.544 version 14.7.0 Release 14)
Standard number:ETSI TS 137 544 V14.7.0 (2018-12)   language:English language
Release Date:20-Dec-2018   technical committee:3GPP RAN 5 - Mobile Terminal Conformance Testing (formely T1)
Drafting committee:   ICS number:
ETSI TS 137 544 V14.7.0 (2018-12)






TECHNICAL SPECIFICATION
Universal Mobile Telecommunications System (UMTS);
LTE;
Universal Terrestrial Radio Access (UTRA)
and Evolved UTRA (E-UTRA);
User Equipment (UE) Over The Air (OTA)
performance;
Conformance testing
(3GPP TS 37.544 version 14.7.0 Release 14)

---------------------- Page: 1 ----------------------
3GPP TS 37.544 version 14.7.0 Release 14 1 ETSI TS 137 544 V14.7.0 (2018-12)



Reference
RTS/TSGR-0537544ve70
Keywords
LTE,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at

If you find errors in the present document, please send your comment to one of the following services:

Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners

GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 37.544 version 14.7.0 Release 14 2 ETSI TS 137 544 V14.7.0 (2018-12)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 37.544 version 14.7.0 Release 14 3 ETSI TS 137 544 V14.7.0 (2018-12)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 14
1 Scope . 15
2 References . 15
3 Definitions, symbols and abbreviations . 17
3.1 Definitions . 17
3.2 Symbols . 17
3.3 Abbreviations . 18
4 General . 19
4.1 Terminal classes . 20
4.1.1 Mechanical modes . 20
4.2 UTRA chip rates . 20
4.3 DUT positioning . 20
4.3.1 DUT positioning for Speech Mode with beside the Head Phantom . 20
4.3.2 DUT positioning for LMEs on Laptop Ground Plane Phantom . 21
4.3.3 DUT positioning for Speech Mode with beside the Head and Hand Phantom . 21
4.3.3.1 General . 21
4.3.3.2 Mono-blocks and closed sliders . 22
4.3.3.3 Folds and open-slides . 23
4.3.3.4 PDA. 23
4.3.4 DUT positioning for Browsing Mode with Hand Phantom . 24
4.3.4.1 General . 24
4.3.4.2 Narrow DUT . 24
4.3.4.3 PDA. 25
4.3.5 DUT positioning for devices with embedded modules . 25
4.3.6 DUT positioning for total radiated multi-antenna sensitivity . 25
4.3.6.1 Handheld UE – Free Space . 25
4.3.6.1.1 MPAC Positioning Guidelines . 25
4.3.6.1.2 RTS Positioning Guidelines . 25
4.4 Sampling grid . 26
4.5 Number of independent samples (for reverberation chamber procedure) . 26
5 Measurement frequencies . 26
5.1 UTRA FDD frequency bands and measurement channels . 26
5.2 UTRA TDD frequency bands and measurement channels . 27
5.3 E-UTRA FDD frequency bands and measurement frequencies allocations . 28
5.4 E-UTRA TDD frequency bands and measurement frequencies allocations . 35
5.5 E-UTRA FDD operating bands and measurement frequency allocations for receiver total radiated multi-
antenna sensitivity . 37
5.6 E-UTRA TDD operating bands and measurement frequency allocations for receiver total radiated multi-
antenna sensitivity . 39
6 Transmitter Performance . 39
6.1 Performance for handheld UE . 39
6.1.1 Total Radiated Power (TRP) for UTRA FDD in Speech Mode with beside the Head Phantom . 39
6.1.1.1 Definition and applicability . 39
6.1.1.2 Minimum Requirements . 40
6.1.1.3 Test purpose . 41
6.1.1.4 Method of test . 41
6.1.1.4.1 Initial conditions . 41
6.1.1.4.2 Procedure . 42
6.1.1.4.3 Procedure, reverberation chamber method . 42
6.1.1.5 Test requirements . 42
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 37.544 version 14.7.0 Release 14 4 ETSI TS 137 544 V14.7.0 (2018-12)
6.1.2 Total Radiated Power (TRP) for UTRA LCR TDD in Speech Mode with beside the Head Phantom . 43
6.1.2.1 Definition and applicability . 43
6.1.2.2 Minimum Requirements . 44
6.1.2.3 Test purpose . 45
6.1.2.4 Method of test . 45
6.1.2.4.1 Initial conditions . 45
6.1.2.4.2 Procedure . 45
6.1.2.4.3 Procedure, reverberation chamber method . 46
6.1.2.5 Test requirements . 46
6.1.3 Total Radiated Power (TRP) for UTRA FDD in Speech Mode with beside the Head and Hand Phantom . 47
6.1.3.1 Definition and applicability . 47
6.1.3.2 Minimum Requirements . 48
6.1.3.3 Test purpose . 49
6.1.3.4 Method of test . 49
6.1.3.4.1 Initial conditions . 49
6.1.3.4.2 Procedure . 49
6.1.3.4.3 Procedure, reverberation chamber method . 50
6.1.3.5 Test requirements . 50
6.1.4 Total Radiated Power (TRP) for UTRA LCR TDD in Speech Mode with beside the Head and Hand
Phanto m . 51
6.1.4.1 Definition and applicability . 51
6.1.4.2 Minimum Requirements . 52
6.1.4.3 Test purpose . 52
6.1.4.4 Method of test . 52
6.1.4.4.1 Initial conditions . 52
6.1.4.4.2 Procedure . 53
6.1.4.4.3 Procedure, reverberation chamber method . 53
6.1.4.5 Test requirements . 54
6.1.5 Total Radiated Power (TRP) for E-UTRA FDD in Speech Mode with beside the Head and Hand
Phanto m . 54
6.1.5.1 Definition and applicability . 55
6.1.5.2 Minimum Requirements . 56
6.1.5.3 Test purpose . 56
6.1.5.4 Method of test . 56
6.1.5.4.1 Initial conditions . 56
6.1.5.4.2 Procedure . 57
6.1.5.4.3 Procedure, reverberation chamber method . 57
6.1.5.5 Test requirements . 57
6.1.6 Total Radiated Power (TRP) for E-UTRA TDD in Speech Mode with beside the Head and Hand
Phanto m . 58
6.1.6.1 Definition and applicability . 58
6.1.6.2 Minimum Requirements . 59
6.1.6.3 Test purpose . 59
6.1.6.4 Method of test . 60
6.1.6.4.1 Initial conditions . 60
6.1.6.4.2 Procedure . 60
6.1.6.4.3 Procedure, reverberation chamber method . 60
6.1.6.5 Test requirements . 60
6.1.7 Total Radiated Power (TRP) for UTRA FDD in Browsing Mode with Hand Phantom . 61
6.1.7.1 Definition and applicability . 61
6.1.7.2 Minimum Requirements . 62
6.1.7.3 Test purpose . 62
6.1.7.4 Method of test . 63
6.1.7.4.1 Initial conditions . 63
6.1.7.4.2 Procedure . 63
6.1.7.4.3 Procedure, reverberation chamber method . 64
6.1.7.5 Test requirements . 64
6.1.8 Total Radiated Power (TRP) for UTRA LCR TDD in Browsing Mode with Hand Phantom . 64
6.1.8.1 Definition and applicability . 64
6.1.8.2 Minimum Requirements . 65
6.1.8.3 Test purpose . 66
6.1.8.4 Method of test . 66
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 37.544 version 14.7.0 Release 14 5 ETSI TS 137 544 V14.7.0 (2018-12)
6.1.8.4.1 Initial conditions . 66
6.1.8.4.2 Procedure . 66
6.1.8.4.3 Procedure, reverberation chamber method . 67
6.1.8.5 Test requirements . 67
6.1.9 Total Radiated Power (TRP) for E-UTRA FDD in Browsing Mode with Hand Phantom . 68
6.1.9.1 Definition and applicability . 68
6.1.9.2 Minimum Requirements . 69
6.1.9.3 Test purpose . 69
6.1.9.4 Method of test . 69
6.1.9.4.1 Initial conditions . 69
6.1.9.4.2 Procedure . 70
6.1.9.4.3 Procedure, reverberation chamber method . 70
6.1.9.5 Test requirements . 70
6.1.10 Total Radiated Power (TRP) for E-UTRA TDD in Browsing Mode with Hand Phantom . 70
6.1.10.1 Definition and applicability . 71
6.1.10.2 Minimum Requirements . 71
6.1.10.3 Test purpose . 72
6.1.10.4 Method of test . 72
6.1.10.4.1 Initial conditions . 72
6.1.10.4.2 Procedure . 72
6.1.10.4.3 Procedure, reverberation chamber method . 72
6.1.10.5 Test requirements . 73
6.2 Performance for LME . 73
6.2.1 Total Radiated Power (TRP) for UTRA FDD LME. 73
6.2.1.2 Minimum Requirements . 74
6.2.1.3 Test purpose . 75
6.2.1.4 Method of test . 75
6.2.1.4.1 Initial conditions . 75
6.2.1.4.2 Procedure . 75
6.2.1.4.3 Procedure, reverberation chamber method . 76
6.2.1.5 Test requirements . 76
6.2.2 Total Radiated Power (TRP) for UTRA LCR TDD LME . 77
6.2.2.2 Minimum Requirements . 78
6.2.2.3 Test purpose . 79
6.2.2.4 Method of test . 79
6.2.2.4.1 Initial conditions . 79
6.2.2.4.2 Procedure . 79
6.2.2.4.3 Procedure, reverberation chamber method . 80
6.2.2.5 Test requirements . 80
6.2.3 Total Radiated Power (TRP) for E-UTRA FDD LME. 81
6.2.4 Total Radiated Power (TRP) for E-UTRA TDD LME . 83
6.3 Performance for LEE . 86
6.3.1 Total Radiated Power (TRP) for UTRA FDD LEE . 86
6.3.1.1 Definition and applicability . 86
6.3.1.2 Minimum Requirements .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27