|
TECHNICAL REPORT
Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS);
LTE;
Vocabulary for 3GPP Specifications
(3GPP TR 21.905 version 15.1.0 Release 15)
---------------------- Page: 1 ----------------------
3GPP TR 21.905 version 15.1.0 Release 15 1 ETSI TR 121 905 V15.1.0 (2019-03)
Reference
RTR/TSGS-0021905vf10
Keywords
GSM,LTE,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
If you find errors in the present document, please send your comment to one of the following services:
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2019.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3GPP TR 21.905 version 15.1.0 Release 15 2 ETSI TR 121 905 V15.1.0 (2019-03)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be
interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 3 ----------------------
3GPP TR 21.905 version 15.1.0 Release 15 3 ETSI TR 121 905 V15.1.0 (2019-03)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 5
1 Scope . 6
2 References . 6
3 Terms and definitions . 6
0-9 . 6
A . 7
B . 8
C . 9
D . 11
E . 12
F . 14
G . 14
H . 15
I . 15
J . 17
K . 17
L . 17
M . 18
N . 21
O . 22
P . 22
Q . 24
R . 25
S . 27
T . 31
U . 33
V . 34
W . 34
X . 34
Y . 34
Z . 34
4 Abbreviations . 35
0-9 . 35
A . 35
B . 36
C . 37
D . 39
E . 41
F . 42
G . 42
H . 43
I . 43
J . 45
K . 45
L . 45
M . 46
N . 48
O . 49
P . 49
Q . 51
R . 52
ETSI
---------------------- Page: 4 ----------------------
3GPP TR 21.905 version 15.1.0 Release 15 4 ETSI TR 121 905 V15.1.0 (2019-03)
S . 53
T . 55
U . 57
V . 58
W . 58
X . 59
Y . 59
Z . 59
5 Equations . 60
Annex A: Change history . 63
History . 67
ETSI
---------------------- Page: 5 ----------------------
3GPP TR 21.905 version 15.1.0 Release 15 5 ETSI TR 121 905 V15.1.0 (2019-03)
Foreword
rd
This Technical Specification has been produced by the 3 Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
ETSI
---------------------- Page: 6 ----------------------
3GPP TR 21.905 version 15.1.0 Release 15 6 ETSI TR 121 905 V15.1.0 (2019-03)
1 Scope
The purpose of this report is to identify specialist technical terms used within the 3GPP project for the purposes of
specifying service requirements. The motivations for this are:
- To ensure that editors use terminology that is consistent across specifications.
- To provide a reader with convenient reference for technical terms that are used across multiple documents.
- To prevent inconsistent use of terminology across documents.
This document is a collection of terms, definitions and abbreviations related to the baseline documents defining 3GPP
objectives and systems framework. This document provides a tool for further work on 3GPP technical documentation
and facilitates their understanding.
The terms, definitions and abbreviations as given in this document are either imported from existing documentation
(ETSI, ITU or elsewhere) or newly created by 3GPP experts whenever the need for precise vocabulary was identified.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document.
[1] Void
[2] Void
[3] "The Path towards UMTS - Technologies for the Information Society" – Report #2, UMTS Forum.
[4] 3GPP TS 23.122: "Non-Access-Statum (NAS) functions related to Mobile Station (MS) in idle
mode".
[5] ETSI TR 180 000: "NGN terminology".
[6] IEC 60050-161: "International Electrotechnical Vocabulary - Chapter 161: Electromagnetic
compatibility".
[7] 3GPP TS 23.401: "General Packet Radio Service (GPRS) enhancements for Evolved Universal
Terrestrial Radio Access Network (E-UTRAN) access".
[8] 3GPP TS 23.101: "General Universal Mobile Telecommunications System (UMTS) architecture".
[9] 3GPP TS 23.682: "Architecture enhancements to facilitate communications with packet data
networks and applications".
3 Terms and definitions
0-9
1.8V technology Smart Card: A Smart Card operating at 1.8V ± 10% and 3V ± 10%.
1.8V technology Terminal: A terminal operating the Smart Card - Terminal interface at 1.8V ± 10% and 3V ± 10%.
ETSI
---------------------- Page: 7 ----------------------
3GPP TR 21.905 version 15.1.0 Release 15 7 ETSI TR 121 905 V15.1.0 (2019-03)
3GPP Generic User Profile (GUP): The 3GPP Generic User Profile is the collection of user related data which affects
the way in which an individual user experiences services and which may be accessed in a standardised manner.
3GPP system: A telecommunication system conforming to 3GPP specifications, consisting of one or more 3GPP core
networks, one or more 3GPP access networks (providing GSM/EDGE, UTRA, E-UTRA, or NR radio access), and/or
non-3GPP access networks (such as WLAN), and User Equipment.
3GPP System core network: refers in this specification to an evolved GSM core network infrastructure.
3GPP System coverage: see coverage area.
3GPP System IC Card: An IC card (or 'smartcard') of defined electromechanical specification which contains at least
one USIM.
3GPP System mobile termination: part of the 3GPP System Mobile Station which provides functions specific to the
management of the radio interface (Um).
3GPP-WLAN Interworking: Used to generically refer to interworking between the 3GPP system and the WLAN
family of standards.
3V technology Smart Card: A Smart Card operating at 3V± 10% and 5V ± 10%.
3V technology Terminal: A terminal operating the Smart Card - Terminal interface at 3V-± 10% and 5V ± 10%.
A
A/Gb mode: mode of operation of the MS when connected to the Core Network via GERAN and the A and/or Gb
interfaces.
Acceptable Cell: A cell that the UE may camp on to make emergency calls. It must satisfy certain conditions.
Access conditions: A set of security attributes associated with a file.
Access delay: The value of elapsed time between an access request and a successful access (source: ITU-T X.140).
Access Stratum: functional grouping consisting of the parts in the infrastructure and in the user equipment and the
protocols between these parts being specific to the access technique (i.e. the way the specific physical media between
the User Equipment and the Infrastructure is used to carry information).
Note: For full definition, see 23.101 [8], clause 6.2.
Access Stratum SDU (Service Data Unit): Unit of data transferred over the access stratum SAP (Service Access
Point) in the Core Network or in the User Equipment.
Access protocol: A defined set of procedures that is adopted at an interface at a specified reference point between a
user and a network to enable the user to employ the services and/or facilities of that network (source: ITU-T I.112).
Accounting: The process of apportioning charges between the Home Environment, Serving Network and User.
Accuracy: A performance criterion that describes the degree of correctness with which a function is performed. (The
function may or may not be performed with the desired speed.) (source: ITU-T I.350).
Active communication: a UE is in active communication when it has a CS connection established. For PS active
communication is defined by the existence of one or more Activated PDP contexts. Either one or both of the mentioned
active communications may occur in the UE.
Active Set: Set of radio links simultaneously involved in a specific communication service between an UE and a
UTRAN.
Adjacent Channel Leakage power Ratio (ACLR): The ratio of the average power centered on the assigned channel
frequency to the average power centered on an adjacent channel frequency. In both cases the average power is measured
with a filter that has Root Raised Cosine (RRC) filter response with roll-off α = 0.22 and a bandwidth equal to the chip
rate.
Air Interface User Rate: The user rate between Mobile Termination and IWF. For T services it is the maximum
possible AIUR not including padding. For NT services it is the maximum possible AIUR.
ETSI
---------------------- Page: 8 ----------------------
3GPP TR 21.905 version 15.1.0 Release 15 8 ETSI TR 121 905 V15.1.0 (2019-03)
ALCAP: Generic name for the transport signalling protocols used to set-up and tear-down transport bearers.
Allowable PLMN: A PLMN which is not in the list of forbidden PLMN in the UE.
Allowed CSG list: A list stored in the UE containing the CSG identities and associated PLMN identities of the CSGs to
which the subscriber belongs.
Ancillary equipment: Equipment (apparatus), used in connection with a receiver, transmitter or transceiver is
considered as an ancillary equipment (apparatus) if:
- the equipment is intended for use in conjunction with a receiver, transmitter or transceiver to provide additional
operational and/or control features to the radio equipment, (e.g. to extend control to another position or location);
and
- the equipment cannot be used on a stand alone basis to provide user functions independently of a receiver,
transmitter or transceiver; and
- the receiver, transmitter or transceiver to which it is connected, is capable of providing some intended operation
such as transmitting and/or receiving without the ancillary equipment (i.e. it is not a sub unit of the main
equipment essential to the main equipment basic functions).
Applet: A small program that is intended not to be run on its own, but rather to be embedded inside another application
Application: an application is a service enabler deployed by service providers, manufacturers or users. Individual
applications will often be enablers for a wide range of services. (UMTS Forum report #2) [3]
Applications / Clients: These are services, which are designed using service capability features.
Application Dedicated File (ADF): an application DF is the entry point to an application on the UICC.
Application Interface: Standardised Interface used by application/clients to access service capability features.
Application protocol: The set of procedures required by the application.
ASCI Generic name to identify the services VGCS, VBS and eMLPP.
Authentication: A property by which the correct identity of an entity or party is established with a required assurance.
The party being authenticated could be a user, subscriber, home environment or serving network.
Available PLMN: A PLMN where the UE has found a cell that satisfies certain conditions.
Average power: The thermal power as measured through a root raised cosine filter with roll-off α = 0.22 and a
bandwidth equal to the chip rate of the radio access mode. The period of measurement shall be one power control group
(timeslot) unless otherwise stated.
B
Band category: A group of operating bands for which the same MSR scenarios apply
Base Station: A base station is a network element in radio access network responsible for radio transmission and
reception in one or more cells to or from the user equipment. A base station can have an integrated antenna or be
connected to an antenna by feeder cables. In UTRAN it terminates the I interface towards the RNC. In GERAN it
ub
terminates the Abis interface towards the BSC.
Baseline capabilities: Capabilities that are required for a service-less UE to operate within a network. The baseline
capabilities for a UE include the capabilities to search for, synchronise with and register (with authentication) to a
network. The negotiation of the UE and the network capabilities, as well as the maintenance and termination of the
registration are also part of the required baseline capabilities.
Base Station Controller: This equipment in the BSS is in charge of controlling the use and the integrity of the radio
resources.
Base station receive period: The time during which the base station is receiving data subframes or UpPTS.
Base Station RF bandwidth: The bandwidth in which a Base Station transmits and receives multiple carriers and/or
RATs simultaneously
ETSI
---------------------- Page: 9 ----------------------
3GPP TR 21.905 version 15.1.0 Release 15 9 ETSI TR 121 905 V15.1.0 (2019-03)
Base Station RF bandwidth edge: The frequency of one of the edges of the Base Station RF bandwidth
Base Station Subsystem: Either a full network or only the access part of a GERAN offering the allocation, release and
management of specific radio resources to establish means of connection between an MS and the GERAN.
A Base Station Subsystem is responsible for the resources and transmission/reception in a set of cells.
Baseline Implementation Capabilities: Set of Implementation capabilities, in each technical domain, required to
enable a UE to support the required Baseline capabilities.
Basic OR Basic Optimal Routeing
Basic telecommunication service: This term is used as a common reference to both bearer services and teleservices.
Bearer: A information transmission path of defined capacity, delay and bit error rate, etc.
Bearer capability: A transmission function which the UE requests to the network.
Bearer independent protocol: (UICC) Mechanism by which the ME provides the (U)SIM applications on the UICC
with access to the data bearers supported by the ME and the network.
Bearer service: A type of telecommunication service that provides the capability of transmission of signals between
access points.
Best effort QoS: The lowest of all QoS traffic classes. If the guaranteed QoS cannot be delivered, the bearer network
delivers the QoS which can also be called best effort QoS.
Best effort service: A service model which provides minimal performance guarantees, allowing an unspecified
variance in the measured performance criteria.
Billing: A function whereby CDRs generated by the charging function are transformed into bills requiring payment.
Broadcast: A value of the service attribute "communication configuration", which denotes unidirectional distribution to
all users (source: ITU-T I.113).
Byte code: (UICC) A hardware machine independent representation of a p
...