ETSI TS 136 509 V15.2.0 (2019-04)

LTE; Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC); Special conformance testing functions for User Equipment (UE) (3GPP TS 36.509 version 15.2.0 Release 15)

ETSI TS 136 509 V15.2.0 (2019-04)

Name:ETSI TS 136 509 V15.2.0 (2019-04)   Standard name:LTE; Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC); Special conformance testing functions for User Equipment (UE) (3GPP TS 36.509 version 15.2.0 Release 15)
Standard number:ETSI TS 136 509 V15.2.0 (2019-04)   language:English language
Release Date:17-Apr-2019   technical committee:3GPP RAN 5 - Mobile Terminal Conformance Testing (formely T1)
Drafting committee:   ICS number:
ETSI TS 136 509 V15.2.0 (2019-04)






TECHNICAL SPECIFICATION
LTE;
Evolved Universal Terrestrial Radio Access (E-UTRA)
and Evolved Packet Core (EPC);
Special conformance testing functions
for User Equipment (UE)
(3GPP TS 36.509 version 15.2.0 Release 15)

---------------------- Page: 1 ----------------------
3GPP TS 36.509 version 15.2.0 Release 15 1 ETSI TS 136 509 V15.2.0 (2019-04)



Reference
RTS/TSGR-0536509vf20
Keywords
LTE
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at

If you find errors in the present document, please send your comment to one of the following services:

Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2019.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.

GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 36.509 version 15.2.0 Release 15 2 ETSI TS 136 509 V15.2.0 (2019-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 36.509 version 15.2.0 Release 15 3 ETSI TS 136 509 V15.2.0 (2019-04)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 6
Introduction . 6
1 Scope . 7
2 References . 7
3 Definitions and abbreviations . 9
3.1 Definitions . 9
3.2 Abbreviations . 9
4 UE special conformance test functions . 10
4.1 General description. 10
4.2 Requirements for UE support of test functions . 10
5 Test Control (TC) protocol procedures and test loop operation . 10
5.1 General description. 10
5.2 Security protection of test control messages . 29
5.3 UE test mode procedures . 29
5.3.1 General . 29
5.3.2 Activate UE test mode . 30
5.3.2.1 General . 30
5.3.2.2 Initiation . 31
5.3.2.3 Reception of ACTIVATE TEST MODE message or AT Command +CATM by UE . 31
5.3.3 Deactivate UE test mode . 32
5.3.3.1 General . 33
5.3.3.2 Initiation . 33
5.3.3.3 Reception of DEACTIVATE TEST MODE message or AT Command +CATM by UE . 33
5.4 UE test loop procedures . 34
5.4.1 General . 34
5.4.2 Close UE test loop . 34
5.4.2.1 General . 35
5.4.2.1a UE test loop mode A PDCP SDU and UE test loop mode B IP PDU buffer size requirement . 36
5.4.2.1b UE test loop mode G and UE test loop mode H buffer size, User data container size and TP-
User-Data buffer size requirements . 36
5.4.2.2 Initiation . 37
5.4.2.3 Reception of CLOSE UE TEST LOOP message by the UE . 37
5.4.2.4 Reception of AT Command +CCUTLE by the UE. 43
5.4.3 UE test loop mode A operation . 44
5.4.4 UE test loop mode B operation . 46
5.4.4.1 Void. 46
5.4.4.2 Reception of IP PDUs when UE is in E-UTRA or NB-IoT mode . 46
5.4.4.3 Expiry of T_delay_modeB timer when UE is in E-UTRA or NB-IoT mode . 46
5.4.4.4 Reception of IP PDUs when UE is in UTRA mode . 46
5.4.4.5 Expiry of T_delay_modeB timer when UE is in UTRA mode . 47
5.4.4.6 Reception of IP PDUs when UE is in GSM/GPRS mode . 47
5.4.4.7 Expiry of T_delay_modeB timer when UE is in GSM/GPRS mode. 47
5.4.4.8 Reception of IP PDUs when UE is in CDMA2000 mode . 47
5.4.4.9 Expiry of T_delay_modeB timer when UE is in CDMA2000 mode . 48
5.4.4.10 Establishment of the RRC/RR connection in E-UTRA, NB-IoT, UTRA, GSM/GPRS and
CDMA2000 mode . 48
5.4.4.11 Release of RRC/RR connection in E-UTRA, NB-IoT, UTRA, GSM/GPRS and CDMA2000
mode after T_delay_modeB timer has expired . 48
5.4.4a UE test loop mode C operation . 48
5.4.4a.1 Reception of MBMS packets . 48
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 36.509 version 15.2.0 Release 15 4 ETSI TS 136 509 V15.2.0 (2019-04)
5.4.4a.2 Release of RRC connection. 49
5.4.4b UE test loop mode D operation . 49
5.4.4b.1 Monitor or Announce ProSe Direct Discovery . 49
5.4.4b.2 Release of RRC connection. 50
5.4.4c UE test loop mode E operation . 50
5.4.4c.1 Receive or Transmit ProSe Direct or V2X Communication . 50
5.4.4c.2 Release of RRC connection. 52
5.4.4c.3 Transition from RRC Idle/Connected to Any Cell Selection state . 52
5.4.4c.4 V2X operation . 52
5.4.4d UE test loop mode F operation . 53
5.4.4d.1 Reception of MBMS packets . 53
5.4.4d.2 Release of RRC connection. 53
5.4.4e UE test loop mode G operation . 53
5.4.4e.1 Reception of ESM DATA TRANSPORT message . 53
5.4.4e.2 Expiry of T_delay_modeGH timer when UE test loop mode G is active . 54
5.4.4f UE test loop mode H operation . 54
5.4.4f.1 Reception of TPDU . 54
5.4.4f.2 Expiry of T_delay_modeGH timer when UE test loop mode H is active . 55
5.4.4g UE test loop mode I operation . 56
5.4.4g.1 Reception of ESM DATA TRANSPORT message . 56
5.4.5 Open UE test loop . 56
5.4.5.1 General . 56
5.4.5.2 Initiation . 56
5.4.5.3 Reception of OPEN UE TEST LOOP message or AT Command +CCUTLE by the UE . 56
5.5 UE Positioning test mode procedures . 57
5.5.1 Reset UE Positioning Stored Information . 57
5.5.1.1 General . 57
5.5.1.2 Initiation . 58
5.5.1.3 Reception of RESET UE POSITIONING STORED INFORMATION message by UE . 58
5.5.2 Update UE Location Information . 58
5.5.2.1 General . 59
5.5.2.2 Initiation . 59
5.5.2.3 Reception of UPDATE UE LOCATION INFORMATION message by UE . 59
5.5.3 UTC time reset . 59
5.5.3.1 General . 59
5.5.3.2 Initiation . 59
5.5.3.3 Reception of AT Command +CUTCR by UE . 59
5.6 MBMS Packet Counter reporting procedure . 60
5.6.1 Request MBMS Packet Counter value. 60
5.6.1.1 General . 60
5.6.1.2 Initiation . 60
5.6.1.3 Reception of UE TEST LOOP MODE C MBMS PACKET COUNTER REQUEST by the UE . 60
5.7 ProSe Packet Counter reporting procedure . 61
5.7.1 Request ProSe Packet Counter value . 61
5.7.1.1 General . 61
5.7.1.2 Initiation . 61
5.7.1.3 Reception of UE TEST LOOP PROSE COUNTER REQUEST by the UE . 62
5.7.1.4 Reception of AT Command +CUSPCREQ by the UE . 62
5.8 SC-PTM Packet Counter reporting procedure . 63
5.8.1 Request SC-PTM Packet Counter value . 63
5.8.1.1 General . 63
5.8.1.2 Initiation . 63
5.8.1.3 Reception of UE TEST LOOP MODE F SCPTM PACKET COUNTER REQUEST by the UE . 63
5.9 Antenna Test Function measurement procedure . 63
5.9.1 Request Antenna Information values . 64
5.9.1.1 General . 64
5.9.1.2 Initiation . 64
5.9.1.3 Reception of ANTENNA INFORMATION REQUEST by the UE . 64
5.9.2 UE ATF requirements . 65
5.9.2.1 RSAP . 65
5.9.2.2 RSARP . 65
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 36.509 version 15.2.0 Release 15 5 ETSI TS 136 509 V15.2.0 (2019-04)
6 Message definitions and contents . 65
6.1 CLOSE UE TEST LOOP . 66
6.2 CLOSE UE TEST LOOP COMPLETE . 71
6.3 OPEN UE TEST LOOP . 71
6.4 OPEN UE TEST LOOP COMPLETE . 72
6.5 ACTIVATE TEST MODE . 72
6.6 ACTIVATE TEST MODE COMPLETE . 72
6.7 DEACTIVATE TEST MODE . 72
6.8 DEACTIVATE TEST MODE COMPLETE . 73
6.9 RESET UE POSITIONING STORED INFORMATION . 73
6.10 UE TEST LOOP MODE C MBMS PACKET COUNTER REQUEST . 74
6.11 UE TEST LOOP MODE C MBMS PACKET COUNTER RESPONSE . 74
6.12 UPDATE UE LOCATION INFORMATION . 74
6.13 UE TEST LOOP PROSE PACKET COUNTER REQUEST . 76
6.14 UE TEST LOOP PROSE PACKET COUNTER RESPONSE . 76
6.15 UE TEST LOOP MODE F SCPTM PACKET COUNTER REQUEST . 79
6.16 UE TEST LOOP MODE F SCPTM PACKET COUNTER RESPONSE . 79
6.17 ANTENNA INFORMATION REQUEST . 79
6.18 ANTENNA INFORMATION RESPONSE . 80
7 Variables, constants and timers . 81
7.1 State variables . 81
7.2 Constants . 83
7.3 Timers . 83
7.4 Configurable parameters . 83
8 Electrical Man Machine Interface (EMMI) . 84
9 Test application definition . 85
9.1 Definition of the UE ATF Client Application . 85
9.1.2 Message Definitions and Contents . 86
Annex A (informative): Void . 89
Annex B (informative): Change history . 90
History . 93

ETSI

---------------------- Page: 6 ----------------------
3GPP TS 36.509 version 15.2.0 Release 15 6 ETSI TS 136 509 V15.2.0 (2019-04)
Foreword
rd
This Technical Specification has been produced by the 3 Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
Introduction
User Equipment (UE) Test Loop functionality is a mandatory feature to support E-UTRA / EPC conformance testing. It
forms part of the core requirements and thus has a direct impact on the design of the UE.
The test methods applied in RF Conformance Test Specification TS 36.521-1 [27] and the test models used in Protocol
Conformance Test Specifications TS 36.523-1 [30] and TS 36.523-3 [32] define the corresponding UE Test Loop
functionality. The present specification describes the location of the data loop in the protocol stack as well as the
procedure and specific messages to activate/deactivate the Test Loop functionality in the UE.
ETSI

---------------------- Page: 7 ----------------------
3GPP TS 36.509 version 15.2.0 Release 15 7 ETSI TS 136 509 V15.2.0 (2019-04)
1 Scope
The present document defines for User Equipment (UE) in E-UTRA FDD or TDD mode those special functions and
their activation/deactivation methods that are required in UE for conformance testing purposes.
This document also describes the operation of these special functions for UEs supporting E-UTRA FDD or TDD mode,
when operating in UTRA FDD and TDD mode, in GSM/GPRS mode, and in CDMA2000 mode.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document.
[1] 3GPP TR 21.905: "Vocabulary for 3GPP Specifications".
[2] 3GPP TS 23.003: "Numbering, Addressing and Identification".
[3] 3GPP TS 23.122: "Non-Access-Stratum functions related to Mobile Station (MS) in idle mode".
[4] 3GPP TS 23.401: "3GPP System Architecture Evolution; GPRS enhancements for E-UTRAN
access".
[5] 3GPP TS 24.007: "Mobile radio interface signalling layer 3; General aspects".
[6] 3GPP TS 24.008: "Mobile Radio Interface Layer 3 specification; Core Network Protocols;
Stage 3".
[
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27