ETSI TS 138 401 V15.4.0 (2019-04)

5G; NG-RAN; Architecture description (3GPP TS 38.401 version 15.4.0 Release 15)

ETSI TS 138 401 V15.4.0 (2019-04)

Name:ETSI TS 138 401 V15.4.0 (2019-04)   Standard name:5G; NG-RAN; Architecture description (3GPP TS 38.401 version 15.4.0 Release 15)
Standard number:ETSI TS 138 401 V15.4.0 (2019-04)   language:English language
Release Date:23-Apr-2019   technical committee:3GPP RAN 3 - lub specification, lur specification, lu specification and UTRAN & O&M
Drafting committee:   ICS number:
ETSI TS 138 401 V15.4.0 (2019-04)






TECHNICAL SPECIFICATION
5G;
NG-RAN;
Architecture description
(3GPP TS 38.401 version 15.4.0 Release 15)

---------------------- Page: 1 ----------------------
3GPP TS 38.401 version 15.4.0 Release 15 1 ETSI TS 138 401 V15.4.0 (2019-04)



Reference
RTS/TSGR-0338401vf40
Keywords
5G
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at

If you find errors in the present document, please send your comment to one of the following services:

Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2019.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.

GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 38.401 version 15.4.0 Release 15 2 ETSI TS 138 401 V15.4.0 (2019-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 38.401 version 15.4.0 Release 15 3 ETSI TS 138 401 V15.4.0 (2019-04)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 5
1 Scope . 6
2 References . 6
3 Definitions and abbreviations . 7
3.1 Definitions . 7
3.2 Abbreviations . 7
4 General principles . 8
5 General architecture . 8
5.1 General . 8
5.2 User plane . 8
5.3 Control plane . 9
6 NG-RAN architecture. 10
6.1 Overview . 10
6.1.1 Overall Architecture of NG-RAN . 10
6.1.2 Overall architecture for separation of gNB-CU-CP and gNB-CU-UP . 11
6.2 NG-RAN identifiers . 11
6.2.1 Principle of handling Application Protocol Identities . 11
6.2.2 gNB-DU ID . 13
6.3 Transport addresses . 13
6.4 UE associations in NG-RAN Node . 13
7 NG-RAN functions description . . 14
7.0 General . 14
7.1 Void . 14
8 Overall procedures in gNB-CU/gNB-DU Architecture . 14
8.1 UE Initial Access . 14
8.2 Intra-gNB-CU Mobility . 16
8.2.1 Intra-NR Mobility . 16
8.2.1.1 Inter-gNB-DU Mobility . 16
8.2.1.2 Intra-gNB-DU handover . 17
8.2.2 EN-DC Mobility . 17
8.2.2.1 Inter-gNB-DU Mobility using MCG SRB . 17
8.2.2.2 Inter-gNB-DU Mobility using SCG SRB (SRB3) . 19
8.3 Mechanism of centralized retransmission of lost PDUs . 19
8.3.1 Centralized Retransmission in Intra gNB-CU Cases . 19
8.4 Multi-Connectivity operation . 20
8.4.1 Secondary Node Addition . 20
8.4.1.1 EN-DC . 20
8.4.2 Secondary Node Release (MN/SN initiated) . 21
8.4.2.1 EN-DC . 21
8.5 F1 Startup and cells activation . 22
8.6 RRC state transition. 23
8.6.1 RRC connected to RRC inactive. 23
8.6.2 RRC inactive to other states . 24
8.7 RRC connection reestablishment . 25
8.8 Multiple TNLAs for F1-C . 27
8.9 Overall procedures involving E1 and F1 . 28
8.9.1 UE Initial Access . 28
8.9.2 Bearer context setup over F1-U . 29
8.9.3 Bearer context release over F1-U . 30
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 38.401 version 15.4.0 Release 15 4 ETSI TS 138 401 V15.4.0 (2019-04)
8.9.3.1 gNB-CU-CP initiated bearer context release . 30
8.9.3.2 gNB-CU-UP initiated bearer context release . 30
8.9.4 Inter-gNB handover involving gNB-CU-UP change . 31
8.9.5 Change of gNB-CU-UP . 33
8.9.6 RRC State transition . 33
8.9.6.1 RRC Connected to RRC Inactive . 33
8.9.6.2 RRC Inactive to other states . 34
9 Synchronization . 36
9.1 gNB Synchronization . 36
10 NG-RAN interfaces . 36
10.1 NG interface . 36
10.2 Xn interface . 36
10.3 F1 interface . 36
10.4 E1 interface . 37
10.5 Antenna interface - general principles . 37
Annex A (informative): Deployment scenarios of gNB/en-gNB . 38
Annex B (informative): Change History . 39
History . 40

ETSI

---------------------- Page: 5 ----------------------
3GPP TS 38.401 version 15.4.0 Release 15 5 ETSI TS 138 401 V15.4.0 (2019-04)
Foreword
rd
This Technical Specification has been produced by the 3 Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
ETSI

---------------------- Page: 6 ----------------------
3GPP TS 38.401 version 15.4.0 Release 15 6 ETSI TS 138 401 V15.4.0 (2019-04)
1 Scope
The present document describes the overall architecture of the NG-RAN, including interfaces NG, Xn and F1 interfaces
and their interaction with the radio interface.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
- References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
- For a specific reference, subsequent revisions do not apply.
- For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same
Release as the present document.
[1] 3GPP TR 21.905: "Vocabulary for 3GPP Specifications".
[2] 3GPP TS 38.300: "NR; Overall description; Stage-2".
[3] 3GPP TS 23.501: "System Architecture for the 5G System".
[4] 3GPP TS 38.473: "NG-RAN; F1 application protocol (F1AP)".
[5] 3GPP TS 38.414: "NG-RAN; NG data transport".
[6] 3GPP TS 38.424: "NG-RAN; Xn data transport".
[7] 3GPP TS 38.474: "NG-RAN; F1 data transport".
[8] ITU-T Recommendation G.823 (2000-03): "The control of jitter and wander within digital
networks which are based on the 2048 kbit/s hierarchy".
[9] ITU-T Recommendation G.824 (2000-03): "The control of jitter and wander within digital
networks which are based on the 1544 kbit/s hierarchy".
[10] ITU-T Recommendation G.825 (2001-08): "The control of jitter and wander within digital
networks which are based on the synchronous digital hierarchy (SDH)".
[11] ITU-T Recommendation G.8261/Y.1361 (2008-04): "Timing and Synchronization aspects in
Packet networks".
[12] 3GPP TS 37.340: "NR; Multi-connectivity; Overall description; Stage-2".
[13] 3GPP TS 33.501: "Security Architecture and Procedures for 5G System".
[14] 3GPP TS 38.410: "NG-RAN; NG general aspect and principles".
[15] 3GPP TS 38.420: "NG-RAN; Xn general aspects and principles"
[16] 3GPP TS 38.470: "NG-RAN; F1 general aspects and principles".
[17] 3GPP TS 38.460: "NG-RAN; E1 general aspects and principles".
[18] 3GPP TS 33.210: "3G security; Network Domain Security (NDS); IP Network Layer Security".
ETSI

---------------------- Page: 7 ----------------------
3GPP TS 38.401 version 15.4.0 Release 15 7 ETSI TS 138 401 V15.4.0 (2019-04)
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in TR 21.905 [1] and the following apply.
A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 [1].
en-gNB: as defined in TS 37.340 [12].
gNB: as defined in TS 38.300 [2].
gNB Central Unit (gNB-CU): a logical node hosting RRC, SDAP and PDCP protocols of the gNB or RRC and PDCP
protocols of the en-gNB that controls the operation of one or more gNB-DUs. The gNB-CU terminates the F1 interface
connected with the gNB-DU.
gNB Distributed Unit (gNB-DU): a logical node hosting RLC, MAC and PHY layers of the gNB or en-gNB, and its
operation is partly controlled by gNB-CU. One gNB-DU supports one or multiple cells. One cell is supported by only
one gNB-DU. The gNB-DU terminates the F1 interface connected with the gNB-CU.
gNB-CU-Control Plane (gNB-CU-CP): a logical node hosting the RRC and the control plane part of the PDCP
protocol of the gNB-CU for an en-gNB or a gNB. The gNB-CU-CP terminates the E1 interface connected with the
gNB-CU-UP and the F1-C interface connected with the gNB-DU.
gNB-CU-User Plane (gNB-CU-UP): a logical node hosting the user plane part of the PDCP protocol of the gNB-CU
for an en-gNB, and the user plane part of the PDCP protocol and the SDAP protocol of the gNB-CU for a gNB. The
gNB-CU-UP terminates the E1 interface connected with the gNB-CU-CP and the F1-U interface connected with the
gNB-DU.
NG-RAN node: as defined in TS 38.300 [2].
PDU Session Resource: This term is used for specification of NG, Xn, and E1 interfaces. It denotes NG-RAN interface
and radio resources provided to support a PDU Session.
3.2 Abbreviations
For the purposes of the present document, the terms and definitions given in TR 21.905 [1] and the following apply.
A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 [1].
5GC 5G Core Network
AMF Access and Mobility Management Function
AP Application Protocol
AS Access Stratum
CM Connection Management
CMAS Commercial Mobile Alert Service
ETWS Earthquake and Tsunami Warning System
F1-U F1 User plane interface
F1-C F1 Control plane interface
F1AP F1 Application Protocol
FDD Frequency Division Duplex
GTP-U GPRS Tunnelling Protocol
IP Internet Protocol
NAS Non-Access Stratum
O&M Operation and Maintenance
PWS Public Warning System
QoS Quality of Service
RET Remote Electrical Tilting
RNL Radio Network Layer
RRC Radio Resource Control
SAP Service Access Point
SCTP Stream Control Transmission Protocol
SFN System Frame Number
SM Session Management
ETSI

---------------------- Page: 8 ----------------------
3GPP TS 38.401 version 15.4.0 Release 15 8 ETSI TS 138 401 V15.4.0 (2019-04)
SMF Session Management Function
TDD Time Division Duplex
TDM Time Division Multiplexing
TMA Tower Mounted Amplifier
TNL Transport Network Layer

4 General principles
The general principles guiding the definition of NG-RAN architecture as well as the NG-RAN interfaces are the
following:
- Logical separation of signalling and data transport networks.
- NG-RAN and 5GC functions are fully separated from transport functions. Addressing scheme used in NG-RAN
and 5GC shall not be tied to the addressing schemes of transport functions. The fact that some NG-RAN or 5GC
functions reside in the same equipment as some transport functions does not make the transport functions part of
the NG-RAN or the 5GC.
- Mobility for an RRC connection is fully controlled by the NG-RAN.
- The NG-RAN interfaces are defined along the following principles:
- The functional division across the interfaces have as few options as possible.
- Interfaces are based on a logical model of the entity controlled through this interface.
- One physical network element can implement multiple logical nodes.
5 General architecture
5.1 General
The protocols over Uu and NG interfaces are divided into two structures:
- User plane protocols
These are the protocols implementing the actual PDU Session service, i.e. carrying user data through the access
stratum.
- Control plane protocols
These are the protocols for controlling the PDU Sessions and the connection between the UE and the network
from different aspects (including requesting the service, controlling different transmission resources, handover
etc.). Also a mechanism for transparent transfer of NAS messages is included.
5.2 User plane
The PDU Session Resource service is offered from SAP to SAP by the Access Stratum. Figure 5.2-1 shows the
protocols on the Uu and the NG interfaces that linked together provide this PDU Session Resource service.
ETSI

---------------------- Page: 9 ----------------------
3GPP TS 38.401 version 15.4.0 Release 15 9 ETSI TS 138 401 V15.4.0 (2019-04)
Non-Access Stratum
Radio
Radio
NG NG
proto-
proto- proto proto
cols
cols cols
cols
(1)
(1)
(2) (2)
Access Stratum
  5GC
UE
NG-RAN
Radio
NG
(Uu)

NOTE 1: The radio interface protocols are defined in 3GPP TS 38.2xx and TS 38.3xx.
NOTE 2: The NG interface protocols are defined in 3GPP TS 38.41x.

Figure 5.2-1: NG and Uu user plane
5.3 Control plane
Figure 5.3-1 shows the control plane (signalling) protocol stacks on NG and Uu interfaces.
(3)
CM,SM CM,SM (3)
Non-Access Stratum
NG NG
Radio
Radio
proto-
proto- proto proto
cols
cols cols
cols
(1) (2)
(1) (2)
Access Stratum
  5GC
UE
NG-RAN
Radio
NG
(Uu)

NOTE 1: The radio interface protocols are defined in 3GPP TS 38.2xx and TS 38.3xx.
NOTE 2: The protocol is defined in 3GPP TS 38.41x. (Description of NG interface).
NOTE 3: CM, SM: This exemplifies a set of NAS control protocols between UE and 5GC. The evolution of the
protocol architecture for these protocols is outside the scope of the present document.

Figure 5.3-1: NG and Uu control plane
NOTE: Both the Radio protocols and the NG protocols contain a mechanism to transparently transfer NAS
messages.
ETSI

---------------------- Page: 10 ----------------------
3GPP TS 38.401 version 15.4.0 Release 15 10 ETSI TS 138 401 V15.4.0 (2019-04)
6 NG-RAN architecture
6.1 Overview
6.1.1 Overall Architecture of NG-RAN

5GC
NG NG
NG-RAN
Xn-C
gNB
gNB

gNB-CU

F1 F1

gNB-DU gNB-DU


Figure 6.1-1: Overall architecture
The NG-RAN consists of a set of gNBs connected to the 5GC through the NG interface.
An gNB can support FDD mode, TDD mode or dual mode operation.
gNBs can be interconnected through the Xn interface.
A gNB may consist of a gNB-CU and one or more gNB-DU(s). A gNB-CU and a gNB-DU is connected via F1
interface.
One gNB-DU is connected to only one gNB-CU.
NOTE: For resiliency, a gNB-DU may be connected to multiple gNB-CUs by appropriate implementation.
NG, Xn and F1 are logical interfaces.
For NG-RAN, the NG and Xn-C interfaces for a gNB consisting of a gNB-CU and gNB-DUs, terminate in the gNB-
CU. For EN-DC, the S1-U and X2-C interfaces for a gNB consisting of a gNB-CU and gNB-DUs, terminate in the
gNB-CU. The gNB-CU and connected gNB-DUs are only visible to other gNBs and the 5GC as a gNB. A possible
deployment scenario is described in Annex A.
The node hosting user plane part of NR PDCP (e.g. gNB-CU, gNB-CU-UP, and for EN-DC, MeNB or SgNB
depending on the bearer split) shall perform user inactivity monitoring and further informs its inactivity or (re)activation
to the node having C-plane connection towards the core network (e.g. over E1, X2). The node hosting NR RLC (e.g.
gNB-DU) may perform user inactivity monitoring and further inform its inactivity or (re)activation to the node hosting
control plane, e.g. gNB-CU or gNB-CU-CP.
UL PDCP configuration (i.e. how the UE uses the UL at the assisting node) is indicated via X2-C (for EN-DC), Xn-C
(for NG-RAN) and F1-C. Radio Link Outage/Resume for DL and/or UL is indicated via X2-U (for EN-DC), Xn-U (for
NG-RAN) and F1-U.
The NG-RAN is layered into a Radio Network Layer (RNL) and a Transport Network Layer (TNL).
The NG-RAN architecture, i.e. the NG-RAN logical nodes and interfaces between them, is defined as part of the RNL.
ETSI

---------------------- Page: 11 ----------------------
3GPP TS 38.401 version 15.4.0 Release 15 11 ETSI TS 138 401 V15.4.0 (2019-04)
For each NG-RAN interface (NG, Xn, F1) the related TNL protocol and the functionality are specified. The TNL
provides services for user plane transport, signalling transport.
In NG-Flex configuration, each gNB is connected to all AMFs within an AMF Region. The AMF Region is defined in
3GPP TS 23.501 [3].
If security protection for control plane and user plane data on TNL of NG-RAN interfaces has to be supported, NDS/IP
3GPP TS 33.501 [13] shall be applied.
6.1.2 Overall architecture for separation of gNB-CU-CP and gNB-CU-UP
The overall architecture for separation of gNB-CU-CP and gNB-CU-UP is depicted in Figure 6.1.2-1.
gNB-CU-CP
gNB-CU-UP
E1
F1-C F1-U
gNB-DU gNB-DU
gNB

Figure 6.1.2-1. Overall architecture for separation of gNB-CU-CP and gNB-CU-UP
- A gNB may consist of a gNB-CU-CP, multiple gNB-CU-UPs and multiple gNB-DUs;
- The gNB-CU-CP is connected to the gNB-DU through the F1-C interface;
- The gNB-CU-UP is connected to the gNB-DU through the F1-U interface;
- The gNB-CU-UP is connected to the gNB-CU-CP through the E1 interface;
- One gNB-DU is connected to only one gNB-CU-CP;
- One gNB-CU-UP is connected to only one gNB-CU-CP;
NOTE 1: For resiliency, a gNB-DU and/or a gNB-CU-UP may be connected to multiple gNB-CU-CPs by
appropriate implementation.
- One gNB-DU can be connected to multiple gNB-CU-UPs under the control of the same gNB-CU-CP;
- One gNB-CU-UP can be connected to multiple DUs under the control of the same gNB-CU-CP;
NOTE 2: The connectivity between a gNB-CU-UP and a gNB-DU is established by the gNB-CU-CP using
Bearer Context Management functions.
NOTE 3: The gNB-CU-CP selects the appropriate gNB-CU-UP(s) for the requested services for the UE. In case
of multiple CU-UPs they belong to same security domain as defined in TS 33.210 [18].
NOTE 4: Data forwarding between gNB-CU-UPs during intra-gNB-CU-CP handover within a gNB may be
supported by Xn-U.
6.2 NG-RAN identifiers
6.2.1 Principle of handling Application Protocol Identities
An Application Proto
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27