|
TECHNICAL SPECIFICATION
Digital cellular telecommunications system (Phase 2+) (GSM);
Mobile Station (MS) conformance specification;
Part 4: Subscriber Identity Module (SIM)
application toolkit conformance test specification
(3GPP TS 51.010-4 version 15.1.0 Release 15)
R
GLOBAL SYSTEM FOR
MOBILE COMMUNICATIONS
---------------------- Page: 1 ----------------------
3GPP TS 51.010-4 version 15.1.0 Release 15 1 ETSI TS 151 010-4 V15.1.0 (2019-04)
Reference
RTS/TSGC-0651010-4vf10
Keywords
GSM
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
If you find errors in the present document, please send your comment to one of the following services:
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2019.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3GPP TS 51.010-4 version 15.1.0 Release 15 2 ETSI TS 151 010-4 V15.1.0 (2019-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be
interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 3 ----------------------
3GPP TS 51.010-4 version 15.1.0 Release 15 3 ETSI TS 151 010-4 V15.1.0 (2019-04)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 9
1 Scope . 10
2 References . 10
3 Definitions and abbreviations . 12
3.1 Mobile station definition and configurations . 12
3.2 Applicability . 12
3.2.1 Applicability of the present document . 12
3.2.2 Applicability of the individual tests . 12
3.2.3 Applicability to terminal equipment . 12
3.2.4 Definitions . 12
3.2.4.1 Format of the table of optional features . 12
3.2.4.2 Format of the applicability table . 13
3.2.4.3 Status and notations. 13
3.3 Table of optional features . 14
3.4 Applicability table . 20
3.5 Conventions for mathematical notations . 55
3.6 Conventions on electrical terms . 55
3.7 Terms on test conditions . 55
4 Test equipment . 55
5 Testing methodology in general . 55
5.1 Testing of optional functions and procedures . 55
5.2 Test interfaces and facilities . 55
5.3 Different protocol layers . 55
5.4 Information to be provided by the apparatus supplier . 55
5.5 Definitions of transmit and receive times . 56
6 Reference test methods . 56
7 Implicit testing . 56
8 Measurement uncertainty . 56
9 Format of tests . 56
10 Generic call set up procedures . 59
11 - 26 . Not
used. 59
27 Testing of the SIM/ME interface . 59
27.1 -
27.21 . Void
. 59
27.22 SIM Application Toolkit . 59
27.22.1A General Test purpose . 59
27.22.2A Definition of default values for SIM Application Toolkit testing . 60
27.22.1 Initialization of SIM Application Toolkit Enabled SIM by SIM Application Toolkit Enabled ME
(Profile Download) . 66
27.22.1.1 Definition and applicability . 66
27.22.1.2 Conformance requirement . 66
27.22.1.3 Test purpose . 66
27.22.1.4 Method of test . 66
27.22.1.4.1 Initial conditions . 66
ETSI
---------------------- Page: 4 ----------------------
3GPP TS 51.010-4 version 15.1.0 Release 15 4 ETSI TS 151 010-4 V15.1.0 (2019-04)
27.22.1.4.2 Procedure . 67
27.22.1.5 Test requirement . 68
27.22.2 Contents of the TERMINAL PROFILE command . 68
27.22.2.1 Definition and applicability . 68
27.22.2.2 Conformance requirement . 68
27.22.2.3 Test purpose . 69
27.22.2.4 Method of test . 69
27.22.2.4.1 Initial conditions . 69
27.22.2.4.2 Procedure . 69
27.22.2.5 Test requirement . 69
27.22.3 Servicing of proactive SIM commands . 69
27.22.3.1 Definition and applicability . 69
27.22.3.2 Conformance requirement . 69
27.22.3.3 Test purpose . 69
27.22.3.4 Method of test . 70
27.22.3.4.1 Initial conditions . 70
27.22.3.4.2 Procedure . 70
27.22.3.5 Test requirement . 70
27.22.4 Proactive SIM commands . 70
27.22.4.1 DISPLAY TEXT . 70
27.22.4.1.1 DISPLAY TEXT (Normal) . 70
27.22.4.1.2 DISPLAY TEXT (Support of "No response from user") . 79
27.22.4.1.3 DISPLAY TEXT (Display of extension text). 80
27.22.4.1.4 DISPLAY TEXT (Sustained text) . 82
27.22.4.1.5 DISPLAY TEXT (Display of icons) . 86
27.22.4.1.6 DISPLAY TEXT (UCS2 display supported). 91
27.22.4.2 GET INKEY . 93
27.22.4.2.1 GET INKEY(normal) . 93
27.22.4.2.2 GET INKEY (No response from User) . 99
27.22.4.2.3 GET INKEY (UCS2 format display) . 101
27.22.4.2.4 GET INKEY (UCS2 format of entry) . 103
27.22.4.2.5 GET INKEY ("Yes/No" Response) . 105
27.22.4.2.6 GET INKEY (display of Icon) . 107
27.22.4.2.7 GET INKEY (Help Information). 114
27.22.4.3 GET INPUT . 117
27.22.4.3.1 GET INPUT (normal) . 117
27.22.4.3.2 GET INPUT (No response from User) . 129
27.22.4.3.3 GET INPUT (UCS2 format display) . 131
27.22.4.3.4 GET INPUT (UCS2 format of entry) . 134
27.22.4.3.5 GET INPUT (default text) . 137
27.22.4.3.6 GET INPUT (display of Icon) . 141
27.22.4.3.7 GET INPUT (Help Information) . 148
27.22.4.4 MORE TIME . 150
27.22.4.4.1 Definition and applicability . 150
27.22.4.4.2 Conformance requirement . 150
27.22.4.4.3 Test purpose . 150
27.22.4.4.4 Method of test . 150
27.22.4.4.5 Test requirement . 151
27.22.4.5 PLAY TONE. 151
27.22.4.5.1 Definition and applicability . 151
27.22.4.5.2 Conformance requirement . 151
27.22.4.5.3 Test purpose . 151
27.22.4.5.4 Method of test . 151
27.22.4.6 POLL INTERVAL . 165
27.22.4.6.1 Definition and applicability . 165
27.22.4.6.2 Conformance requirement . 165
27.22.4.6.3 Test purpose . 165
27.22.4.6.4 Method of test . 165
27.22.4.6.5 Test requirement . 166
27.22.4.7 REFRESH . 166
27.22.4.7.1 REFRESH (normal) . 166
27.22.4.7.2 REFRESH (IMSI changing procedure) . 174
ETSI
---------------------- Page: 5 ----------------------
3GPP TS 51.010-4 version 15.1.0 Release 15 5 ETSI TS 151 010-4 V15.1.0 (2019-04)
27.22.4.8 SET UP MENU and ENVELOPE MENU SELECTION . 178
27.22.4.8.1 SET UP MENU (normal) and ENVELOPE MENU SELECTION . 178
27.22.4.8.2 SET UP MENU (help request support) and ENVELOPE MENU SELECTION . 190
27.22.4.8.3 SET UP MENU (next action support) and ENVELOPE MENU SELECTION . 192
27.22.4.8.4 SET UP MENU (display of icons) and ENVELOPE MENU SELECTION . 195
27.22.4.8.5 SET UP MENU (soft keys support) and ENVELOPE MENU SELECTION . 200
27.22.4.9 SELECT ITEM . 202
27.22.4.9.1 SELECT ITEM (mandatory features for ME supporting SELECT ITEM) . 202
27.22.4.9.2 SELECT ITEM (next action support) . 215
27.22.4.9.3 SELECT ITEM (default item support) . 216
27.22.4.9.4 SELECT ITEM (help request support) . 218
27.22.4.9.5 SELECT ITEM (icons support) . 219
27.22.4.9.6 SELECT ITEM (presentation style) . 223
27.22.4.9.7 SELECT ITEM (soft keys support) . 226
27.22.4.9.8 SELECT ITEM (Support of "No response from user") . 228
27.22.4.10 SEND SHORT MESSAGE . 229
27.22.4.10.1 SEND SHORT MESSAGE (normal) . 229
27.22.4.10.2 SEND SHORT MESSAGE (UCS2 support) . 246
27.22.4.10.3 SEND SHORT MESSAGE (icon support) . 248
27.22.4.11 SEND SS . 253
27.22.4.11.1 SEND SS (normal) . 253
27.22.4.11.2 SEND SS (Icon support). 265
27.22.4.11.3 SEND SS (UCS2 support) . 271
27.22.4.12 SEND USSD . 272
27.22.4.12.1 SEND USSD (normal) . 272
27.22.4.12.2 SEND USSD (Icon support) . 282
27.22.4.12.3 SEND USSD (UCS2 support) . 288
27.22.4.13 SET UP CALL . 290
27.22.4.13.1 SET UP CALL (normal). 290
27.22.4.13.2 SET UP CALL (second alpha identifier) . 302
27.22.4.13.3 SET UP CALL (display of icons) . 304
27.22.4.14 POLLING OFF . 312
27.22.4.14.1 Definition and applicability . 312
27.22.4.14.2 Conformance requirement . 312
27.22.4.14.3 Test purpose . 312
27.22.4.14.4 Method of test . 313
27.22.4.14.5 Test requirement . 315
27.22.4.15 PROVIDE LOCAL INFORMATION . 315
27.22.4.15.1 Definition and applicability . 315
27.22.4.15.2 Conformance requirement . 315
27.22.4.15.3 Test purpose . 315
27.22.4.15.4 Method of tests . 315
27.22.4.15.5 Test requirement . 322
27.22.4.16 SET UP EVENT LIST . 322
27.22.4.16.1 SET UP EVENT LIST (normal) . 322
27.22.4.17 PERFORM CARD APDU . 331
27.22.4.17.1 PERFORM CARD APDU (normal) . 331
27.22.4.17.2 PERFORM CARD APDU (detachable card reader) . 349
27.22.4.18 POWER OFF CARD . 350
27.22.4.18.1 POWER OFF CARD (normal) . 350
27.22.4.18.2 POWER OFF CARD (detachable card reader) . 352
27.22.4.19 POWER ON CARD .
...