|
TECHNICAL SPECIFICATION
Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS);
LTE;
5G;
NR, E-UTRA, UTRA and GSM/EDGE;
Multi-Standard Radio (MSR) Base Station (BS)
radio transmission and reception
(3GPP TS 37.104 version 15.6.0 Release 15)
---------------------- Page: 1 ----------------------
3GPP TS 37.104 version 15.6.0 Release 15 1 ETSI TS 137 104 V15.6.0 (2019-05)
Reference
RTS/TSGR-0437104vf60
Keywords
5G,GSM,LTE,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
If you find errors in the present document, please send your comment to one of the following services:
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2019.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3GPP TS 37.104 version 15.6.0 Release 15 2 ETSI TS 137 104 V15.6.0 (2019-05)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 3 ----------------------
3GPP TS 37.104 version 15.6.0 Release 15 3 ETSI TS 137 104 V15.6.0 (2019-05)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 6
1 Scope . 7
2 References . 7
3 Definitions, symbols and abbreviations . 8
3.1 Definitions . 8
3.2 Symbols . 11
3.3 Abbreviations . 13
4 General . 14
4.1 Relation between the MSR specification and the single-RAT specifications . 14
4.2 Relationship between minimum requirements and test requirements . 15
4.3 Base station classes . 15
4.4 Regional requirements . 15
4.5 Operating bands and Band Categories. 16
4.5.1 Band category 1 aspects (BC1) . 21
4.5.2 Band category 2 aspects (BC2) . 21
4.5.3 Band category 3 aspects (BC3) . 22
4.6 Channel arrangement . 22
4.6.1 Channel spacing . 22
4.6.1A CA Channel spacing . 23
4.6.2 Channel raster . 23
4.6.3 Carrier frequencies and numbering . 24
4.7 Requirements for contiguous and non-contiguous spectrum . 24
4.8 Requirements for BS capable of multi-band operation . 24
5 Applicability of requirements . 25
5.1 Band category 1 . 25
5.2 Band category 2 . 28
5.3 Band category 3 . 31
5.4 Inclusion of requirements by reference . 34
6 Transmitter characteristics . 34
6.1 General . 34
6.2 Base station output power . 35
6.2.1 Minimum requirement . 35
6.2.2 Additional requirement (regional) . 35
6.2.3 E-UTRA minimum requirement for DL RS power . 36
6.2.4 UTRA FDD minimum requirement for primary CPICH power . 36
6.2.4A UTRA FDD minimum requirement for secondary CPICH power. 36
6.2.5 UTRA TDD minimum requirement for primary CCPCH power . 36
6.2.6 NB-IoT minimum requirement for DL NRS power . 36
6.3 Output power dynamics . 36
6.3.1 E-UTRA minimum requirement . 36
6.3.2 UTRA FDD minimum requirement . 36
6.3.3 UTRA TDD minimum requirement . 37
6.3.4 GSM/EDGE minimum requirement . 37
6.3.5 NB-IoT minimum requirement . 37
6.3.6 NR minimum requirement . 37
6.4 Transmit ON/OFF power . 37
6.4.1 Transmitter OFF power . 37
6.4.1.1 Minimum Requirement . 37
6.4.2 Transmitter transient period . 37
ETSI
---------------------- Page: 4 ----------------------
3GPP TS 37.104 version 15.6.0 Release 15 4 ETSI TS 137 104 V15.6.0 (2019-05)
6.4.2.1 Minimum requirements . 38
6.5 Transmitted signal quality . 38
6.5.1 Modulation quality . 38
6.5.1.1 E-UTRA minimum requirement . 38
6.5.1.2 UTRA FDD minimum requirement . 39
6.5.1.3 UTRA TDD minimum requirement . 39
6.5.1.4 GSM/EDGE minimum requirement . 39
6.5.1.5 NB-IoT minimum requirement . 39
6.5.1.6 NR minimum requirement . 39
6.5.2 Frequency error . 39
6.5.2.1 E-UTRA minimum requirement . 39
6.5.2.2 UTRA FDD minimum requirement . 39
6.5.2.3 UTRA TDD minimum requirement . 39
6.5.2.4 GSM/EDGE minimum requirement . 39
6.5.2.5 NB-IoT minimum requirement . 39
6.5.2.6 NR minimum requirement . 39
6.5.3 Time alignment error . 39
6.5.3.1 E-UTRA minimum Requirement . 40
6.5.3.2 UTRA FDD minimum requirement . 40
6.5.3.3 UTRA TDD minimum requirement . 40
6.5.3.4 NB-IoT minimum Requirement . 40
6.5.3.5 NR minimum Requirement . 40
6.6 Unwanted emissions . 40
6.6.1 Transmitter spurious emis sions . 40
6.6.1.1 Mandatory Requirements . 41
6.6.1.1.1 Minimum requirement (Category A) . 41
6.6.1.1.2 Minimum requirement (Category B) . 41
6.6.1.1.3 Additional minimum requirement for BC2 (Category B) . 42
6.6.1.2 Protection of the BS receiver of own or different BS . 42
6.6.1.2.1 Minimum Requirement . 42
6.6.1.3 Additional spurious emissions requirements . 42
6.6.1.3.1 Minimum Requirement . 42
6.6.1.4 Co-location with other base stations . 52
6.6.1.4.1 Minimum Requirement . 52
6.6.2 Operating band unwanted emissions . 57
6.6.2.1 General minimum requirement for Band Categories 1 and 3 . 58
6.6.2.2 General minimum requirement for Band Category 2 . 65
6.6.2.3 GSM/EDGE single-RAT requirements . 74
6.6.2.4 Additional requirements . 74
6.6.2.4.1 Limits in FCC Title 47 . 74
6.6.2.4.2 Unsynchronized operation for BC3 . 74
6.6.2.4.3 Protection of DTT. 74
6.6.2.4.4 Co-existence with services in adjacent frequency bands . 75
6.6.2.4.5 Co-existence with RNSS/GPS services in North America . 75
6.6.2.4.6 Additional requirements for band 41 . 76
6.6.2.4.7 Additional band 32, 50, 51, 74, 75 and 76 unwanted emissions . 76
6.6.2.4.8 Additional requirements for band 45 . 77
6.6.2.4.9 Additional requirements for band 48 . 78
6.6.3 Occupied bandwidth . 78
6.6.3.1 Minimum requirement . 78
6.6.4 Adjacent Channel Leakage Power Ratio (ACLR) . 78
6.6.4.1 E-UTRA minimum requirement . 78
6.6.4.2 UTRA FDD minimum requirement . 80
6.6.4.3 UTRA TDD minimum requirement . 81
6.6.4.4 Cumulative ACLR requirement in non-contiguous spectrum . 81
6.6.4.5 NB-IoT minimum requirement . 82
6.6.4.6 NR minimum requirement . 83
6.7 Transmitter intermodulation . 84
6.7.1 General minimum requirement . 84
6.7.2 Additional minimum requirement (BC1 and BC2) . 85
6.7.3 Additional minimum requirement (BC3) . 86
6.7.4 Additional requirements . 86
ETSI
---------------------- Page: 5 ----------------------
3GPP TS 37.104 version 15.6.0 Release 15 5 ETSI TS 137 104 V15.6.0 (2019-05)
7 Receiver characteristics . 87
7.1 General . 87
7.2 Reference sensitivity level . 87
7.2.1 E-UTRA minimum requirement . 87
7.2.2 UTRA FDD minimum requirement . 87
7.2.3 UTRA TDD minimum requirement . 88
7.2.4 GSM/EDGE minimum requirement . 88
7.2.5 NB-IoT minimum requirement . 88
7.2.6 NR minimum requirement . 88
7.2.7 Void . 88
7.3 Dynamic range . 88
7.3.1 E-UTRA minimum requirement . 88
7.3.2 UTRA FDD minimum requirement . 88
7.3.3 UTRA TDD minimum requirement . 88
7.3.4 GSM/EDGE minimum requirement . 88
7.3.5 NB-IoT minimum requirement . 88
7.3.6 NR minimum requirement . 88
7.4 In-band selectivity and blocking . 89
7.4.1 General blocking minimum requirement . 89
7.4.2 General narrowband blocking minimum requirement . 90
7.4.3 Additional Narrowband blocking minimum requirement for GSM/EDGE . 92
7.4.4 GSM/EDGE requirements for AM suppression . 92
7.4.5 Additional BC3 blocking minimum requirement . 92
7.5 Out-of-band blocking . 92
7.5.1 General minimum requirement . 92
7.5.2 Co-location minimum requirement . 93
7.6 Receiver spurious emissions. 98
7.6.1 General minimum requirement . 98
7.6.2 Additional minimum requirement for BC2 (Category B) . 99
7.7 Receiver intermodulation . 99
7.7.1 General intermodulation minimum requirement . 99
7.7.2 General narrowband intermodulation minimum requirement . 102
7.7.3 Additional narrowband intermodulation minimum requirement for GSM/EDGE . 106
7.8 In-channel selectivity . 106
7.8.1 E-UTRA minimum requirement . 106
7.8.2 NR minimum requirement . 106
8 Performance requirements . 106
8.1 E-UTRA minimum requirement . 106
8.2 UTRA FDD minimum requirement . 106
8.3 UTRA TDD minimum requirement . 107
8.4 GSM/EDGE minimum requirement . 107
8.5 NR minimum requirement . 107
Annex A (normative): Characteristics of interfering signals . 108
A.1 UTRA FDD interfering signal . . 108
A.2 UTRA TDD interfering signal . 108
A.3 E-UTRA interfering signal . 108
Annex B (normative): Environmental requirements for the BS equipment . 109
Annex C (informative): Change history . 110
History .
...