|
TECHNICAL SPECIFICATION
Universal Mobile Telecommunications System (UMTS);
LTE;
Active Antenna System (AAS) Base Station (BS)
conformance testing;
Part 1: conducted conformance testing
(3GPP TS 37.145-1 version 13.8.0 Release 13)
---------------------- Page: 1 ----------------------
3GPP TS 37.145-1 version 13.8.0 Release 13 1 ETSI TS 137 145-1 V13.8.0 (2019-05)
Reference
RTS/TSGR-0437145-1vd80
Keywords
LTE,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
If you find errors in the present document, please send your comment to one of the following services:
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2019.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3GPP TS 37.145-1 version 13.8.0 Release 13 2 ETSI TS 137 145-1 V13.8.0 (2019-05)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 3 ----------------------
3GPP TS 37.145-1 version 13.8.0 Release 13 3 ETSI TS 137 145-1 V13.8.0 (2019-05)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 12
1 Scope . 13
2 References . 13
3 Definitions, symbols and abbreviations . 15
3.1 Definitions . 15
3.2 Symbols . 18
3.3 Abbreviations . 20
4 General test conditions and declarations . 22
4.1 Measurement uncertainties and test requirements . 22
4.1.1 General . 22
4.1.2 Acceptable uncertainty of Test System . 22
4.1.2.1 General . 22
4.1.2.2 Measurement of transmitter . 23
4.1.2.3 Measurement of receiver . 24
4.1.3 Interpretation of measurement results . 26
4.2 Conducted and radiated requirement reference points . 27
4.3 Base station classes for AAS BS . 27
4.4 Regional requirements . 28
4.5 Operating bands and band categories . 28
4.6 Channel arrangements . 29
4.7 Requirements for AAS BS capable of multi-band operation . 29
4.8 AAS BS configurations . 30
4.8.1 Transmit configurations . 30
4.8.2 Receive configurations . 30
4.8.3 Power supply options . 31
4.8.4 BS with integrated Iuant BS modem . 31
4.9 Capability sets . 31
4.10 Manufacturer declarations for AAS BS testing . 32
4.11 Test signal configurations for AAS BS . 37
4.11.1 General . 37
4.11.2 Test signal configurations . 37
4.11.2.1 ATC1: UTRA multicarrier operation . 37
4.11.2.1.1 General . 37
4.11.2.1.2 ATC1a generation . 37
4.11.2.1.3 ATC1b generation . 37
4.11.2.1.4 ATC1 power allocation . 38
4.11.2.2 ANTC1: UTRA FDD multicarrier non-contiguous operation . 38
4.11.2.2.1 General . 38
4.11.2.2.2 ANTC1 generation . 38
4.11.2.2.3 ANTC1 power allocation. 38
4.11.2.3 ATC2: E-UTRA multicarrier operation . 38
4.11.2.3.1 General . 38
4.11.2.3.2 ATC2a generation . 38
4.11.2.3.3 ATC2b generation . 39
4.11.2.3.4 ATC2 power allocation . 39
4.11.2.4 ANTC2: E-UTRA multicarrier non-contiguous operation . 40
4.11.2.4.1 General . 40
4.11.2.4.2 ANTC2 generation . 40
4.11.2.4.3 ANTC2 power allocation. 40
4.11.2.5 ATC3: UTRA and E-UTRA multi RAT operation . 40
4.11.2.5.1 General . 40
ETSI
---------------------- Page: 4 ----------------------
3GPP TS 37.145-1 version 13.8.0 Release 13 4 ETSI TS 137 145-1 V13.8.0 (2019-05)
4.11.2.5.2 ATC3a generation . 40
4.11.2.5.3 ATC3b generation . 41
4.11.2.5.4 ATC3 power allocation . 41
4.11.2.6 ANTC3: UTRA and E-UTRA multi RAT non-contiguous operation . 41
4.11.2.6.1 General . 41
4.11.2.6.2 ANTC3a generation . 41
4.11.2.6.3 ANTC3 power allocation. 42
4.11.2.7 ATC4: Single carrier for receiver tests . 42
4.11.2.7.1 ATC4a generation . 42
4.11.2.7.2 ATC4b generation . 42
4.11.2.7.3 ATC4c generation . 42
4.11.2.8 Generation of MB-MSR test configurations . 42
4.11.2.8.1 ATC5a: MB-MSR test configuration for full carrier allocation . 42
4.11.2.8.2 ATC5b: MB-MSR test configuration with high PSD per carrier . 43
4.12 RF channels and test models . 44
4.12.1 RF channels . 44
4.12.2 Test models . 45
4.13 Format and interpretation of tests . 46
5 Applicability of Requirements . 47
5.1 General . 47
5.2 Test configurations for TAB connectors for operating bands where MSR is supported . 48
5.3 Test configurations for multi-carrier capable TAB connector(s) in operating bands where one RAT
capability sets are supported . 50
5.3.1 General . 50
5.3.2 TAB connector supporting one RAT only MSR in the operating band . 51
5.3.3 TAB connector supporting Single-RAT UTRA in the operating band . 55
5.3.4 TAB connector supporting Single-RAT E-UTRA in the operating band . 56
5.4 Test configurations for Multi-band TAB connectors . 57
5.4.1 Multi-band TAB connector supporting MSR operation . 57
5.4.2 Multi-band TAB connector supporting Single-RAT only . 58
6 Conducted transmitter characteristics . 60
6.1 General . 60
6.2 Base station output power . 61
6.2.1 General . 61
6.2.2 Maximum output power . 61
6.2.2.1 Definition and applicability . 61
6.2.2.2 Minimum Requirement . 61
6.2.2.3 Test Purpose . 61
6.2.2.4 Method of test . 61
6.2.2.4.1 Initial conditions . 61
6.2.2.4.2 Procedure . 62
6.2.2.5 Test Requirements . 62
6.2.3 UTRA FDD primary CPICH power . 62
6.2.3.1 Definition and applicability . 62
6.2.3.2 Minimum requirement . 62
6.2.3.3 Test purpose . 63
6.2.3.4 Method of test . 63
6.2.3.4.1 Initial conditions . 63
6.2.3.4.2 Procedure . 63
6.2.3.5 Test requirements . 63
6.2.4 UTRA TDD primary CCPCH power . 64
6.2.4.1 Definition and applicability . 64
6.2.4.2 Minimum requirement . 64
6.2.4.3 Test purpose . 64
6.2.4.4 Method of test . 64
6.2.4.4.1 Initial conditions . 64
6.2.4.4.2 Procedure . 65
6.2.4.5 Test requirements . 65
6.2.5 UTRA FDD additional CPICH power for MIMO mode . 66
6.2.5.1 Definition and applicability . 66
ETSI
---------------------- Page: 5 ----------------------
3GPP TS 37.145-1 version 13.8.0 Release 13 5 ETSI TS 137 145-1 V13.8.0 (2019-05)
6.2.5.2 Minimum requirement . 67
6.2.5.3 Test purpose . 67
6.2.5.4 Method of test . 67
6.2.5.4.1 Initial conditions . 67
6.2.5.4.2 Procedure . 67
6.2.5.5 Test requirements . 68
6.2.6 E-UTRA DL RS power . 68
6.2.6.1 Definition and applicability . 68
6.2.6.2 Minimum requirement . 68
6.2.6.3 Test purpose . 68
6.2.6.4 Method of test . 68
6.2.6.4.1 Initial conditions . 68
6.2.6.4.2 Procedure . 69
6.2.6.5 Test requirements . 69
6.3 Output power dynamics . 69
6.3.1 General . 69
6.3.2 UTRA Inner loop power control in the downlink . 69
6.3.2.1 Definition and applicability . 69
6.3.2.2 Minimum requirement . 70
6.3.2.3 Test purpose . 70
6.3.2.4 Method of test . 70
6.3.2.4.1 Initial conditions . 70
6.3.2.4.2 Procedure . 71
6.3.2.5 Test requirements . 72
6.3.2.5.1 UTRA FDD . 72
6.3.2.5.2 UTRA TDD . 72
6. 3.3 Power control dynamic range . 73
6.3.3.1 Definition and applicability . 73
6.3.3.2 Minimum requirement . 73
6.3.3.3 Test purpose . 73
6.3.3.4 Method of test . 73
6.3.3.4.1 Initial conditions . 73
6.3.3.4.2 Procedure . 74
6.3.3.5 Test requirements . 75
6.3.3.5.1 UTRA FDD . 75
6.3.3.5.2 UTRA TDD . 75
6. 3.4 Total power dynamic range . 75
6.3.4.1 Definition and applicability . 75
6.3.4.2 Minimum requirement . 76
6.3.4.3 Test purpose . 76
6.3.4.4 Method of test . 76
6.3.4.4.1 Initial conditions . 76
6.3.4.4.2 Procedure . 76
6.3.4.5 Test requirements .
...