|
SLOVENSKI STANDARD
01-junij-2022
Geografske informacije - Metapodatki - 2. del: Razširitev za zajemanje in obdelavo
geografskih informacij - Dopolnilo A1 (ISO 19115-2:2019/Amd 1:2022)
Geographic information - Metadata - Part 2: Extensions for acquisition and processing -
Amendment 1 (ISO 19115-2:2019/Amd 1:2022)
Geoinformation - Metadaten - Teil 2: Erweiterungen für Erhebung und Verarbeitung -
Änderung 1 (ISO 19115-2:2019/Amd 1:2022)
Information géographique - Métadonnées - Partie 2: Extensions pour l'acquisition et le
traitement - Amendement 1 (ISO 19115-2:2019/Amd 1:2022)
Ta slovenski standard je istoveten z: EN ISO 19115-2:2019/A1:2022
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 19115-2:2019/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2022
EUROPÄISCHE NORM
ICS 35.240.70
English Version
Geographic information - Metadata - Part 2: Extensions for
acquisition and processing - Amendment 1 (ISO 19115-
2:2019/Amd 1:2022)
Information géographique - Métadonnées - Partie 2: Geoinformation - Metadaten - Teil 2: Erweiterungen
Extensions pour l'acquisition et le traitement - für Erhebung und Verarbeitung - Änderung 1 (ISO
Amendement 1 (ISO 19115-2:2019/Amd 1:2022) 19115-2:2019/Amd 1:2022)
This amendment A1 modifies the European Standard EN ISO 19115-2:2019; it was approved by CEN on 6 October 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19115-2:2019/A1:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 19115-2:2019/A1:2022) has been prepared by Technical Committee ISO/TC
211 "Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287
“Geographic Information” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2022, and conflicting national standards
shall be withdrawn at the latest by September 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 19115-2:2019/Amd 1:2022 has been approved by CEN as EN ISO 19115-
2:2019/A1:2022 without any modification.
INTERNATIONAL ISO
STANDARD 19115-2
Second edition
2019-01
AMENDMENT 1
2022-03
Geographic information —
Metadata —
Part 2:
Extensions for acquisition and
processing
AMENDMENT 1
Information géographique — Métadonnées —
Partie 2: Extensions pour l'acquisition et le traitement
AMENDEMENT 1
Reference number
ISO 19115-2:2019/Amd.1:2022(E)
ISO 19115-2:2019/Amd.1:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
ISO 19115-2:2019/Amd.1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 211, Geographic information/Geomatics,
in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC
287, Geographic Information, in accordance with the Agreement on technical cooperation between ISO
and CEN (Vienna Agreement).
A list of all parts in the ISO 19115 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iii
ISO 19115-2:2019/Amd.1:2022(E)
Geographic information — Metadata —
Part 2:
Extensions for acquisition and processing
AMENDMENT 1
B.2, Table B.4
Replace Table B.4 with the following:
ISO 19115-2:2019/Amd.1:2022(E)
...