|
SIST EN 14033-3:2010/kFprA1:2011
01-julij-2011
Železniške naprave - Zgornji ustroj - Težka tirna mehanizacija za gradnjo in
vzdrževanje - 3. del: Splošne varnostne zahteve
Railway applications - Track - Railbound construction and maintenance machines - Part
3: General safety requirements
Bahnanwendungen - Oberbau - Schienengebundene Bau- und
Instandhaltungsmaschinen - Teil 3: Allgemeine Sicherheitsanforderungen
Applications ferroviaires - Voie - Machines de construction et de maintenance
empruntant exclusivement les voies ferrées - Partie 3: Prescriptions générales pour la
sécurité
Ta slovenski standard je istoveten z: EN 14033-3:2009/FprA1
ICS:
45.120 2SUHPD]DJUDGQMRLQ Equipment for
Y]GUåHYDQMHåHOH]QLFR] railway/cableway
åLþQLF construction and
maintenance
SIST EN 14033-3:2010/kFprA1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 14033-3:2010/kFprA1:2011
---------------------- Page: 2 ----------------------
SIST EN 14033-3:2010/kFprA1:2011
EUROPEAN STANDARD
FINAL DRAFT
EN 14033-3:2009
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2011
ICS 93.100
English Version
Railway applications - Track - Railbound construction and
maintenance machines - Part 3: General safety requirements
Applications ferroviaires - Voie - Machines de construction Bahnanwendungen - Oberbau - Schienengebundene Bau-
et de maintenance empruntant exclusivement les voies und Instandhaltungsmaschinen - Teil 3: Allgemeine
ferrées - Partie 3: Prescriptions générales pour la sécurité Sicherheitsanforderungen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 256.
This draft amendment A1, if approved, will modify the European Standard EN 14033-3:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14033-3:2009/FprA1:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 14033-3:2010/kFprA1:2011
EN 14033-3:2009/FprA1:2011 (E)
Contents Page
Foreword .3
1 Modification to Clause 2, Normative references .4
2 Modification to Annex D .4
3 Modification to the Bibliography .7
2
---------------------- Page: 4 ----------------------
SIST EN 14033-3:2010/kFprA1:2011
EN 14033-3:2009/FprA1:2011 (E)
Foreword
This document (EN 14033-3:2009/FprA1:2011) has been prepared by Technical Committee CEN/TC 256
“Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directives.
For relationship with EU Directives, see informative Annexes ZA and ZB, which are integral parts of this
document.
EN 14033, Railway applications — Track — Rail
...