EN 4717:2022

Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification

EN 4717:2022

Name:EN 4717:2022   Standard name:Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification
Standard number:EN 4717:2022   language:English language
Release Date:29-Mar-2022   technical committee:ASD-STAN - Aerospace
Drafting committee:ASD-STAN/D 4/S 8 - Thermoplastics   ICS number:49.025.40 - Rubber and plastics

SLOVENSKI STANDARD
01-maj-2022
Aeronavtika - Polietereterketon s 55 % neprekinjenih ogljikovih vlaken (PEEK-
CF55) - Zaloga materiala - Specifikacija materialov
Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume
(PEEK-CF55) - Stock shape material - Material specification
Luft- und Raumfahrt - Polyetheretherketon mit 55 Volumen % (PEEK-CF55) endlos
Kohlenstofffaser - Halbfabrikat - Materialspezifikation
Série aérospatiale - Polyétheréthercétone avec 55 % de fibre de carbone continue par
volume (PEEK-CF55) - Demi-produit - Spécification de matériau
Ta slovenski standard je istoveten z: EN 4717:2022
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4717
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2022
EUROPÄISCHE NORM
ICS 49.025.40
English Version
Aerospace series - Polyetheretherketone with 55 %
continuous carbon fibre by volume (PEEK-CF55) - Stock
shape material - Material specification
Série aérospatiale - Polyétheréthercétone avec 55 % de Luft- und Raumfahrt - Polyetheretherketon mit 55
fibre de carbone continue par volume (PEEK-CF55) - Volumen % (PEEK-CF55) endlos Kohlenstofffaser -
Demi-produit - Spécification de matériau Halbfabrikat - Materialspezifikation
This European Standard was approved by CEN on 25 July 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4717:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Requirements . 5

European foreword
This document (EN 4717:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2022, and conflicting national standards shall
be withdrawn at the latest by September 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
1 Scope
This document specifies the requirements of a thermoplastic composite stock shape material (e.g. tape,
rod, etc.) consisting of polyetheretherketone with 55 % continuous carbon fibres by volume (PEEK–
CF55) for aerospace applications, which is presupposed to be used in a further thermal moulding
1)
process for forming parts described in EN 4714 .
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the editio
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27