|
SIST EN 1863-1:2012/oprA1:2015
01-marec-2015
Steklo v gradbeništvu - Delno kaljeno natrij-kalcijevo silikatno steklo - 1. del:
Definicija in opis
Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and
description
Glas im Bauwesen - Teilvorgespanntes Kalknatronglas - Teil 1: Definition und
Beschreibung
Verre dans la construction - Verre de silicate sodo-calcique durci thermiquement - Partie
1: Définition et description
Ta slovenski standard je istoveten z: EN 1863-1:2011/prA1
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
SIST EN 1863-1:2012/oprA1:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 1863-1:2012/oprA1:2015
---------------------- Page: 2 ----------------------
SIST EN 1863-1:2012/oprA1:2015
EUROPEAN STANDARD
DRAFT
EN 1863-1:2011
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2015
ICS 81.040.20
English Version
Glass in building - Heat strengthened soda lime silicate glass -
Part 1: Definition and description
Verre dans la construction - Verre de silicate sodo-calcique Glas im Bauwesen - Teilvorgespanntes Kalknatronglas -
durci thermiquement - Partie 1: Définition et description Teil 1: Definition und Beschreibung
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 129.
This draft amendment A1, if approved, will modify the European Standard EN 1863-1:2011. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brusse
...