|
SLOVENSKI STANDARD
01-januar-2023
Zobozdravstvo - Mobilne dentalne enote in stoli za paciente - 2. del: Sistemi za
dovod zraka in vode, za sukcijo (aspiracijo) in odvod odpadne vode (ISO 5467-
2:2022)
Dentistry - Mobile dental units and dental patient chairs - Part 2: Air, water, suction and
wastewater systems (ISO 5467-2:2022)
Zahnheilkunde - Mobile Behandlungseinheiten und Patientenliegen - Teil 2: Luft, Wasser,
Absaugung und Abwasser (ISO 5467-2:2022)
Médecine bucco-dentaire - Units dentaires et fauteuils dentaires patient mobiles - Partie
2: Systèmes d'alimentation en air et en eau, d'aspiration et d'évacuation des eaux usées
(ISO 5467-2:2022)
Ta slovenski standard je istoveten z: EN ISO 5467-2:2022
ICS:
11.060.20 Zobotehnična oprema Dental equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 5467-2
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2022
EUROPÄISCHE NORM
ICS 11.060.20
English Version
Dentistry - Mobile dental units and dental patient chairs -
Part 2: Air, water, suction and wastewater systems (ISO
5467-2:2022)
Médecine bucco-dentaire - Units dentaires et fauteuils Zahnheilkunde - Mobile Behandlungseinheiten und
dentaires patient mobiles - Partie 2: Systèmes Patientenliegen - Teil 2: Luft, Wasser, Absaugung und
d'alimentation en air et en eau, d'aspiration et Abwasser (ISO 5467-2:2022)
d'évacuation des eaux usées (ISO 5467-2:2022)
This European Standard was approved by CEN on 6 September 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5467-2:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 5467-2:2022) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2023, and conflicting national standards shall be
withdrawn at the latest by April 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 5467-2:2022 has been approved by CEN as EN ISO 5467-2:2022 without any
modification.
INTERNATIONAL ISO
STANDARD 5467-2
First edition
2022-09
Dentistry — Mobile dental units and
dental patient chairs —
Part 2:
Air, water, suction and wastewater
systems
Médecine bucco-dentaire — Units dentaires et fauteuils dentaires
patient mobiles —
Partie 2: Systèmes d'alimentation en air et en eau, d'aspiration et
d'évacuation des eaux usées
Reference number
ISO 5467-2:2022(E)
ISO 5467-2:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
ISO 5467-2:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Classification . 2
4.1 Classification of dental air supply . 2
4.2 Classification of suction system and suction air flow rate . 2
5 Requirements . 2
5.1 Connections from the mobile dental unit to dental handpiece . 2
5.2 Supply connections to the mobile dental unit . 3
5.3 Water and wastewater systems . 3
5.3.1 Incoming water and bottled water . 3
5.3.2 Materials used for construction of procedural water systems within the
mobile dental unit . 3
5.3.3 Backflow prevention device for mobile dental units connected to the
external drinking water supply . 3
5.3.4 Cuspidors . . 4
5.3.5 Water venturi . 4
5.3.6 Particle filter . 4
5.3.7 Bacterial filter . 4
5.3.8 Bottled water system supplying procedural water or solution . 4
5.3.9 Retraction . 4
5.3.10 Treatment method for biofilm . 4
5.3.11 Water sampling connection point . 4
5.3.12 Wastewater drain connection . 5
5.3.13 Wastewater container . 5
5.4 Air system . 5
5.4.1 Incoming dental air . 5
5.4.2 Purity class of dental air supplied by an integrated compressed air source
equipment . 5
5.4.3 Particle filters . 5
5.4.4 Bacterial filters . 5
5.4.5 Condensate drain . 5
5.4.6 Compressed air filter . 5
5.4.7 Sound level of compressed air source equipment . 6
5.5 Mobile dental unit suction systems . 6
5.5.1 Maximum suction pressure . 6
5.5.2 Suction pressure head loss . 6
5.5.3 Configuration of cannula connectors and cannula . 6
5.5.4 Operating hoses with cannula connectors . 6
5.5.5 Solids filter . 6
5.5.6 Air separator . 6
5.5.7 Mobile dental unit suction source connection point . 6
5.5.8 Suction flow rate . 7
5.5.9 Bacterial filter . 7
5.6 Test report . 7
6 Sampling .
...