|
oSIST prEN ISO 14439:2007
01-november-2007
Steklo v gradbeništvu - Pravila za zastekljevanje - Zagozdna zasteklitev (ISO/DIS
14439:2007)
Glass in building - Assembly rules - Glazing wedges (ISO/DIS 14439:2007)
Verre dans la construction - Regles de pose - Calage des vitrages (ISO/DIS 14439:2007)
Ta slovenski standard je istoveten z: prEN ISO 14439
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
oSIST prEN ISO 14439:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN ISO 14439
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2007
ICS 81.040.20
English Version
Glass in building - Assembly rules - Glazing wedges (ISO/DIS
14439:2007)
Verre dans la construction - Règles de pose - Calage des
vitrages (ISO/DIS 14439:2007)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 129.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 14439:2007: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
prEN ISO 14439:2007 (E)
Contents Page
Foreword.3
2
---------------------- Page: 3 ----------------------
prEN ISO 14439:2007 (E)
Foreword
This document (prEN ISO 14439:2007) has been prepared by Technical Committee CEN/TC 129 "Glass in
building", the secretariat of which is held by NBN, in collaboration with Technical Committee ISO/TC 160
"Glass in building".
This document is currently submitted to the parallel Enquiry.
3
---------------------- Page: 4 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 14439
ISO/TC 160/SC 2 Secretariat: ANSI
Voting begins on: Voting terminates on:
2007-08-16 2008-01-16
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Glass in building — Assembly rules — Glazing wedges
Verre dans la construction — Règles de pose — Calage des vitrages
ICS 81.040.20
ISO/CEN PARALLEL ENQUIRY
This draft International Standard is a draft standard developed within the European Committee for
Standardization (CEN) and processed under the CEN-lead mode of collaboration as defined in the
Vienna Agreement. The document has been transmitted by CEN to ISO for circulation for ISO member
body voting in parallel with CEN enquiry. Comments received from ISO member bodies, including those
from non-CEN members, will be considered by the appropriate CEN technical body. Should this DIS be
accepted, a final draft, established on the basis of comments received, will be submitted to a parallel two-
month FDIS vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le tr
...