EN 14214:2012/FprA1

Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods

EN 14214:2012/FprA1

Name:EN 14214:2012/FprA1   Standard name:Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods
Standard number:EN 14214:2012/FprA1   language:English language
Release Date:   technical committee:CEN/TC 19 - Petroleum products, lubricants and related products
Drafting committee:CEN/TC 19/WG 24 - Specification for automotive diesel   ICS number:75.160.20 - Liquid fuels
SLOVENSKI STANDARD
SIST EN 14214:2012/kprA1:2013
01-junij-2013
*RULYD]DPRWRUQDYR]LOD0HWLOQLHVWULPDãþREQLKNLVOLQ )$0( ]DGL]HOVNH
PRWRUMH=DKWHYHLQSUHVNXVQHPHWRGH
Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines
and heating applications - Requirements and test methods
Kraftstoffe für Kraftfahrzeuge - Fettsäure-Methylester (FAME) für Dieselmotoren -
Anforderungen und Prüfverfahren
Carburants pour automobiles - Esters méthyliques d'acides gras (EMAG) pour moteurs
diesel - Exigences et méthodes d'essais
Ta slovenski standard je istoveten z: EN 14214:2012/FprA1
ICS:
75.160.20 7HNRþDJRULYD Liquid fuels
SIST EN 14214:2012/kprA1:2013 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14214:2012/kprA1:2013

---------------------- Page: 2 ----------------------

SIST EN 14214:2012/kprA1:2013


EUROPEAN STANDARD
FINAL DRAFT
EN 14214:2012
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
May 2013
ICS 75.160.20
English Version
Liquid petroleum products - Fatty acid methyl esters (FAME) for
use in diesel engines and heating applications - Requirements
and test methods
Produits pétroliers liquides - Esters méthyliques d'acides Flüssige Mineralölerzeugnisse - Fettsäure-Methylester
gras (EMAG) pour moteurs diesel et comme combustible (FAME) zur Verwendung in Dieselmotoren und als Heizöl -
de chauffage - Exigences et méthodes d'essai Anforderungen und Prüfverfahren
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 19.

This draft amendment A1, if approved, will modify the European Standard EN 14214:2012. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14214:2012/FprA1:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14214:2012/kprA1:2013
EN 14214:2012/FprA1:2013 (E)
Contents Page
1 Modifications to the Foreword .4
2 Modifications to Clause 2 .4
3 Modification to 5.1 .4
4 Modifications to Table 1 under 5.3 .4
5 Modifications to Table 2 under 5.4.2 .5
6 Modification to 5.4.3.2 .5
7 Modification to Table 3a under 5.4.3.3 .5
8 Modifications to 5.5.1 .5
9 Modifications to 5.5.2 .5
10 Modification to Annex A .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27