|
SIST EN 13042-1:2007/kFprA1:2009
01-junij-2009
Stroji in obrati za proizvodnjo, obdelavo in predelavo votlega stekla - Varnostne
zahteve - 1. del: Dovajalnik za regulacijo kaplje
Machines and plants for the manufacture, treatment and processing of hollow glass -
Safety requirements - Part 1: Gob feeder
Maschinen und Anlagen für die Herstellung, Be- und Verarbeitung von Hohlglas -
Sicherheitsanforderungen - Teil 1: Tropfenspeiser
Machines et installations pour la production, le façonnage et la transformation du verre
creux - Exigences de sécurité - Partie 1: Mécanisme d'alimentation en paraisons
Ta slovenski standard je istoveten z: EN 13042-1:2007/FprA1
ICS:
81.100 2SUHPD]DVWHNODUVNRLQ Equipment for the glass and
NHUDPLþQRLQGXVWULMR ceramics industries
SIST EN 13042-1:2007/kFprA1:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13042-1:2007/kFprA1:2009
---------------------- Page: 2 ----------------------
SIST EN 13042-1:2007/kFprA1:2009
EUROPEAN STANDARD
FINAL DRAFT
EN 13042-1:2007
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
April 2009
ICS 81.100
English Version
Machines and plants for the manufacture, treatment and
processing of hollow glass - Safety requirements - Part 1: Gob
feeder
Machines et installations pour la production, le façonnage Maschinen und Anlagen für die Herstellung, Be- und
et la transformation du verre creux - Exigences de sécurité Verarbeitung von Hohlglas - Sicherheitsanforderungen -
- Partie 1: Mécanisme d'alimentation en paraisons Teil 1: Tropfenspeiser
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 151.
This draft amendment A1, if approved, will modify the European Standard EN 13042-1:2007. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13042-1:2007/FprA1:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13042-1:2007/kFprA1:2009
EN 13042-1:2007/FprA1:2009 (E)
Contents Page
Foreword .3
1 Modification to the Foreword .3
2 Modification to the Scope .3
3 Modifications to Clause 2 .3
4 Modifications to Clause 5 .4
5 Modification to Clause 6 .6
6 Modifications to Clause 7 .6
7 Addition of Annex ZB .7
8 Modification to the Bibliography .7
2
---------------------- Page: 4 ----------------------
SIST EN 13042-1:2007/kFprA1:2009
EN 13042-1:2007/FprA1:2009 (E)
Foreword
This document (EN 13042-1:2007/FprA1:2009) has been prepared by Technical Committee CEN/TC 151
...