|
SLOVENSKI STANDARD
01-december-2022
Nadomešča:
SIST EN ISO 12216:2018
Mala plovila - Okna, lopute, pokrovi in vrata - Zahteve za trdnost in odpornost proti
vodi (ISO 12216:2020)
Small craft - Windows, portlights, hatches, deadlights and doors - Strength and
watertightness requirements (ISO 12216:2020)
Kleine Wasserfahrzeuge - Fenster, Bullaugen, Luken, Seeschlagblenden und Türen -
Anforderungen an die Festigkeit und Wasserdichtheit (ISO 12216:2020)
Petits navires - Fenêtres, hublots, panneaux, tapes et portes - Exigences de résistance
et d'étanchéité (ISO 12216:2020)
Ta slovenski standard je istoveten z: EN ISO 12216:2022
ICS:
47.080 Čolni Small craft
91.060.50 Vrata in okna Doors and windows
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 12216
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2022
EUROPÄISCHE NORM
ICS 47.080 Supersedes EN ISO 12216:2018
English Version
Small craft - Windows, portlights, hatches, deadlights and
doors - Strength and watertightness requirements (ISO
12216:2020)
Petits navires - Fenêtres, hublots, panneaux, tapes et Kleine Wasserfahrzeuge - Fenster, Bullaugen, Luken,
portes - Exigences de résistance et d'étanchéité (ISO Seeschlagblenden und Türen - Anforderungen an die
12216:2020) Festigkeit und Wasserdichtheit (ISO 12216:2020)
This European Standard was approved by CEN on 6 June 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12216:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 12216:2020 has been prepared by Technical Committee ISO/TC 188 "Small craft” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 12216:2022 by
Technical Committee CEN/TC 464 “Small Craft” the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2023, and conflicting national standards shall be
withdrawn at the latest by April 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12216:2018.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is included
in EN ISO 12216:2022/A1:2022.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 12216:2020 has been approved by CEN as EN ISO 12216:2022 without any modification.
INTERNATIONAL ISO
STANDARD 12216
Second edition
2020-07
Small craft — Windows, portlights,
hatches, deadlights and doors
— Strength and watertightness
requirements
Petits navires — Fenêtres, hublots, panneaux, tapes et portes —
Exigences de résistance et d'étanchéité
Reference number
ISO 12216:2020(E)
©
ISO 2020
ISO 12216:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
ISO 12216:2020(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General definitions of openings and their coverings . 2
3.2 Devices covering an opening . 2
3.3 Plate of an appliance . 2
3.4 Specific appliances . 3
3.5 Areas definition . 4
3.6 Plate end-connections . 6
3.7 Types of glass . 6
3.8 Watertightness . 6
3.9 Other general definitions . 7
4 General requirements . 8
4.1 Requirements of other International Standards . 8
4.2 Strength of appliances . 8
4.3 Watertightness of appliances . 8
4.3.1 Minimum degree of watertightness . 8
4.3.2 Additional requirements for appliances related to watertightness. 8
5 Plate materials . 9
5.1 General . 9
5.2 Acrylic sheet materials . 9
5.3 Glass . 9
5.3.1 Restrictions of usage . 9
6 Specific requirements of appliances . 9
6.1 Plate end connection and location . 9
6.1.1 Simply supported plates . . 9
6.1.2 Semi-fixed plates .10
6.2 Fastening requirements .10
6.2.1 Fastening of plates and frames .10
6.2.2 Fastening of semi-fixed plates .11
6.2.3 Fastening of glued plates .11
6.2.4 Stiffeners and attachments .11
6.3 Special requirements .11
6.3.1 Appliances fitted in area I .11
6.3.2 Appliances fitted in area IIa .13
6.3.3 Flush deck companionway opening sill heights .14
6.3.4 Sliding appliances .15
6.3.5 Washboards .16
6.3.6 Securing system .16
6.3.7 Deadlights .16
6.3.8 Multihull escape hatches.16
6.3.9 Prefabricated appliances .17
6.3.10 Appliance systems (composite appliances) .17
7 Strength assessment .
...