|
SLOVENSKI STANDARD
01-januar-2023
Nadomešča:
SIST EN 13048:2009
Embalaža - Prožne aluminijaste tube - Metoda za merjenje debeline notranje plasti
laka
Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement
method
Packmittel - Aluminiumtuben - Verfahren zur Bestimmung der Dicke des
Innenschutzlackes
Emballage - Tubes souples en aluminium - Méthode de détermination de l'épaisseur de
vernis intérieur
Ta slovenski standard je istoveten z: EN 13048:2022
ICS:
55.120 Pločevinke. Tube Cans. Tins. Tubes
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 13048
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2022
EUROPÄISCHE NORM
ICS 55.120 Supersedes EN 13048:2009
English Version
Packaging - Flexible aluminium tubes - Internal lacquer
film thickness measurement method
Emballage - Tubes souples en aluminium - Méthode de Packmittel - Aluminiumtuben - Verfahren zur
détermination de l'épaisseur de vernis intérieur Bestimmung der Dicke des Innenschutzlackes
This European Standard was approved by CEN on 22 August 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13048:2022 E
worldwide for CEN national Members.
Contents Page
European foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Eddy current test .4
5 Chemical test .4
5.1 Principle .4
5.2 Apparatus .5
5.2.1 Test measuring and other equipment .5
5.2.2 Chemical agents .5
6 Method .5
6.1 Preliminary precautions .5
6.2 Preparation of samples .5
6.3 Measurement procedure .6
Figure 1 — Measuring points .6
7 Test report .6
European foreword
This document (EN 13048:2022) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2023, and conflicting national standards shall be withdrawn
at the latest by April 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be
...