EN 12697-36:2022

Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement

EN 12697-36:2022

Name:EN 12697-36:2022   Standard name:Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement
Standard number:EN 12697-36:2022   language:English language
Release Date:05-Apr-2022   technical committee:CEN/TC 227 - Road materials
Drafting committee:CEN/TC 227/WG 1 - Bituminous mixtures   ICS number:93.080.20 - Road construction materials

SLOVENSKI STANDARD
01-julij-2022
Nadomešča:
SIST EN 12697-36:2004
Bitumenske zmesi - Preskusne metode - 36. del: Ugotavljanje debeline
bitumenskega vozišča
Bituminous mixtures - Test methods - Part 36: Determination of the thickness of
bituminous pavement
Asphalt - Prüfverfahren - Teil 36: Bestimmung der Dicke von Asphalt-Konstruktionen
Mélanges bitumineux - Méthodes d´essai - Partie 36 : Méthode dévaluation d'épaisseur
d'un revêtement bitumineux
Ta slovenski standard je istoveten z: EN 12697-36:2022
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 12697-36
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2022
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 12697-36:2003
English Version
Bituminous mixtures - Test methods - Part 36:
Determination of the thickness of bituminous pavement
Mélanges bitumineux - Méthodes d'essai - Partie 36 : Asphalt - Prüfverfahren - Teil 36: Bestimmung der
Méthode d'évaluation d'épaisseur d'un revêtement Dicke von Asphalt-Konstruktionen
bitumineux
This European Standard was approved by CEN on 21 February 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12697-36:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Apparatus . 4
5 Test specimens . 5
6 Procedure. 6
6.1 Destructive measurement . 6
6.2 Electromagnetic measurement . 7
7 Test report . 9
8 Precision . 9
European foreword
This document (EN 12697-36:2022) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2022, and conflicting national standards shall be withdrawn
at the latest by October 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12697-36:2003.
The main changes compared to the previous edition are listed below:
— the title no longer refers to hot mix asphalt;
— general editorial update according to current standard template;
— addition of Clause 2. Normative references according to CEN/CENELEC Internal Regulations, Part 3:2019;
— addition of Clause 3. Terms and definitions according to CEN/CENELEC Internal Regulations, Part 3:2019;
— Clause 4, title amended to “Apparatus” due to the introduction of Clause 2 and 3;
— Clause 4, introduction of Figure 1. Example of calliper with one extended leg;
— 4.4, NOTE has been transformed into main text;
— Clause 5, amended title to “Test specimens” due to the introduction of Clause 2 and 3;
— Clause 5, NOTE has been transformed into main text;
— Clause 6, title amended to “Procedure” due to the introduction of Clause 2 and 4;
— 6.1.4, NOTE has been transformed into main text;
— 6.2, editorial corrections of keys to Figure 3 and Figure 4;
— addition of Clause 7. Test report, due to the introduction of Clause 2 and 3;
— Clause 7, revision of data to be reported according to CEN/CENELEC Internal Regulations, Part 3:2019;
— addition of Clause 8. Precision, due to the introduction of Clause 2 and 3.
A list of all parts in the EN 12697 series can be found on the CEN website.
Any feedback and questions on this document should be directed to the users’ national standards body. A
complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania,
Serbia, Slovakia, Slovenia, Spain, Sweden, Swi
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27