|
SLOVENSKI STANDARD
01-junij-2022
Nadomešča:
SIST EN 13234:2007
Fina keramika (sodobna keramika, sodobna tehnična keramika) - Mehanske
lastnosti keramičnih kompozitov pri temperaturi okolice in pri zračnem tlaku -
Ugotavljanje odpornosti proti širjenju razpoke s preskušanjem občutljivosti zareze
(ISO 18608:2017)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical
properties of ceramic composites at ambient temperature in air atmospheric pressure -
Determination of the resistance to crack propagation by notch sensitivity testing (ISO
18608:2017)
Hochleistungskeramik - Mechanische Eigenschaften von keramischen
Verbundwerkstoffen bei Umgebungstemperatur in Luft unter atmosphärischem Druck -
Bestimmung der Rissausbreitungsbeständigkeit durch die Kerbempfindlichkeitsprüfung
(ISO 18608:2017)
Céramiques techniques - Propriétés mécaniques des céramiques composites à
température ambiante sous pression atmosphérique - Détermination de la résistance à
la propagation de fissure par un essai de sensibilité à l'entaille (ISO 18608:2017)
Ta slovenski standard je istoveten z: EN ISO 18608:2022
ICS:
81.060.30 Sodobna keramika Advanced ceramics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 18608
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2022
EUROPÄISCHE NORM
ICS 81.060.30 Supersedes EN 13234:2006
English Version
Fine ceramics (advanced ceramics, advanced technical
ceramics) - Mechanical properties of ceramic composites
at ambient temperature in air atmospheric pressure -
Determination of the resistance to crack propagation by
notch sensitivity testing (ISO 18608:2017)
Céramiques techniques - Propriétés mécaniques des Hochleistungskeramik - Mechanische Eigenschaften
céramiques composites à température ambiante sous von keramischen Verbundwerkstoffen bei
pression atmosphérique - Détermination de la Umgebungstemperatur in Luft unter atmosphärischem
résistance à la propagation de fissure par un essai de Druck - Bestimmung der
sensibilité à l'entaille (ISO 18608:2017) Rissausbreitungsbeständigkeit durch die
Kerbempfindlichkeitsprüfung (ISO 18608:2017)
This European Standard was approved by CEN on 27 March 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18608:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 18608:2017 has been prepared by Technical Committee ISO/TC 206 "Fine ceramics” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 18608:2022
by Technical Committee CEN/TC 184 “Advanced technical ceramics” the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2022, and conflicting national standards shall
be withdrawn at the latest by October 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13234:2006.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 18608:2017 has been approved by CEN as EN ISO 18608:2022 without any modification.
INTERNATIONAL ISO
STANDARD 18608
First edition
2017-03
Fine ceramics (advanced ceramics,
advanced technical ceramics) —
Mechanical properties of ceramic
composites at ambient temperature
in air atmospheric pressure —
Determination of the resistance
to crack propagation by notch
sensitivity testing
Céramiques techniques — Propriétés mécaniques des céramiques
composites à température ambiante sous pression atmosphérique
— Détermination de la résistance à la propagation de fissure par un
essai de sensibilité à l’entaille
Reference number
ISO 18608:2017(E)
©
ISO 2017
ISO 18608:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
[email protected]
www.iso.org
ii © ISO 2017 – All rights reserved
ISO 18608:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Significance and use . 2
6 Apparatus . 4
6.1 Test machine . 4
6.2 Load train. 4
6.2.1 General. 4
6.2.2 Grips . . . 4
6.2.3 Load train couplers . 4
6.3 Data recording system . 5
6.4 Micrometers . 5
6.5 Ligament size measuring device . 5
7 Specimens . 5
7.1 Un-notched test specimens . 5
7.2 Notched test specimens . 5
7.3 Notches . 6
8 Test specimen preparation . 7
8.1 Machining and preparation . 7
8.2 Number of test specimens . 7
9 Test procedure . 7
9.1 Test on reference specimen . 7
9.2 Test on notched specimen . 7
9.2.1 Displacement rate . 7
9.2.2 Measurement of test specimen dimensions . 7
9.2.3 Test technique . 7
9.2.4 Test validity . 8
10 Calculation of results . 8
10.1 Test specimen origin . 8
10.2 Tensile strength of un-notched specimen . 8
10.3 Tensile strength of the notched specimen . 8
10.4 Plotting of notch sensitivity diagram . 8
10.5 Calculation of equivalent fracture toughness for the different classes of behaviour . 9
10.5.1 Class A behaviour . 9
10.5.2 Class B behaviour . 9
10.5.3 Class C behaviour .10
11 Test
...