|
SLOVENSKI STANDARD
01-julij-2022
Nadomešča:
SIST EN ISO 1735:2005
Siri in izdelki iz predelanih sirov, kazeini in kazeinati - Določevanje vsebnosti
maščob - Gravimetrijska metoda (ISO 23319:2022)
Cheese and processed cheese products, caseins and caseinates - Determination of fat
content - Gravimetric method (ISO 23319:2022)
Käse und Schmelzkäseprodukte, Kaseine und Kaseinate - Bestimmung des Fettgehaltes
- Gravimetrisches Verfahren (ISO 23319:2022)
Fromages et fromages fondus, caséines et caséinates - Détermination de la teneur en
matière grasse - Méthode gravimétrique (ISO 23319:2022)
Ta slovenski standard je istoveten z: EN ISO 23319:2022
ICS:
67.100.30 Sir Cheese
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 23319
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2022
EUROPÄISCHE NORM
ICS 67.100.30 Supersedes EN ISO 1735:2004
English Version
Cheese and processed cheese products, caseins and
caseinates - Determination of fat content - Gravimetric
method (ISO 23319:2022)
Fromages et fromages fondus, caséines et caséinates - Käse und Schmelzkäseprodukte, Kaseine und
Détermination de la teneur en matière grasse - Kaseinate - Bestimmung des Fettgehaltes -
Méthode gravimétrique (ISO 23319:2022) Gravimetrisches Verfahren (ISO 23319:2022)
This European Standard was approved by CEN on 17 February 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23319:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 23319:2022) has been prepared by Technical Committee ISO/TC 34 "Food
products" in collaboration with Technical Committee CEN/TC 302 “Milk and milk products - Methods of
sampling and analysis” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2022, and conflicting national standards shall
be withdrawn at the latest by October 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1735:2004.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 23319:2022 has been approved by CEN as EN ISO 23319:2022 without any modification.
INTERNATIONAL ISO
STANDARD 23319
IDF 250
First edition
2022-03
Cheese and processed cheese
products, caseins and caseinates —
Determination of fat content —
Gravimetric method
Fromages et fromages fondus, caséines et caséinates —
Détermination de la teneur en matière grasse — Méthode
gravimétrique
Reference numbers
ISO 23319:2022(E)
IDF 250:2022(E)
ISO 23319:2022(E)
IDF 250:2022(E)
© ISO and IDF 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office International Dairy Federation
CP 401 • Ch. de Blandonnet 8 Silver Building • Bd Auguste Reyers 70/B
CH-1214 Vernier, Geneva B-1030 Brussels
Phone: +41 22 749 01 11 Phone: +32 2 325 67 40
Fax: +32 2 325 67 41
Email: [email protected] Email: [email protected]
Website: www.iso.org Website: www.fil-idf.org
Published in Switzerland
ii
ISO 23319:2022(E)
IDF 250:2022(E)
Contents Page
Forewords .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Reagents . 2
6 Apparatus . 2
7 Sampling . 4
8 Preparation of test sample . 4
8.1 Cheese . 4
8.2 Caseins and caseinates . 4
9 Procedure .5
9.1 Test portion . 5
9.2 Blank test . 5
9.3 Preparation of a fat-collecting vessel . 5
9.4 Determination . 5
10 Calculation and expression of results . 8
11 Precision . 9
11.1 Interlaboratory test . . 9
11.2 Repeatability . 9
11.3 Reproducibility . 9
11.4 Test report . 9
Annex A (informative) Additional procedures .11
Annex B (informative) Fat-extraction tube model with siphon or wash-bottle fittings .13
Annex C (informative) Interlaboratory test for cheeses .14
Annex D (informative) Interlaboratory test for caseins and caseinates .15
Bibliography .16
iii
ISO 23319:2022(E)
IDF 250:2022(E)
Forewords
ISO (the International Organization for Standardization) is a worldwide federation of national
standards bodies (ISO member bodies). The work of preparing International Standards is normally
carried out through ISO technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented on that committee.
International organizations, governmental and non-governmental, in liaison with ISO, also take part
in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 34, Food products, Subcommittee SC 5,
Milk and milk products, and the International Dairy Federation (IDF), in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 302, Milk and milk products -
Methods of sampling and analysis, in accordance with the Agreement on technical cooperation between
ISO and CEN (Vienna Agreement). It is being published jointly by ISO and IDF.
This first edition cancels and replaces ISO 1735 | IDF 5:2004 and ISO 5543 | IDF 127:2004, which have
been merged and technically revised.
Any feedback or questions on this document should be directed to the user’s nati
...