|
SLOVENSKI STANDARD
01-junij-2022
Nadomešča:
SIST EN ISO 19712-3:2014
Polimerni materiali - Dekorativni trdni površinski materiali - 3. del: Ugotavljanje
lastnosti - Oblika (ISO 19712-3:2022)
Plastics - Decorative solid surfacing materials - Part 3: Determination of properties -
Solid surface shapes (ISO 19712-3:2022)
Kunststoffe - Dekorative Mineralwerkstoffe - Teil 3: Prüfverfahren - Formteile (ISO 19712
-3:2022)
Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 3:
Détermination des propriétés - Produits mis en forme (ISO 19712-3:2022)
Ta slovenski standard je istoveten z: EN ISO 19712-3:2022
ICS:
83.140.20 Laminatne plošče Laminated sheets
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 19712-3
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2022
EUROPÄISCHE NORM
ICS 83.140.20 Supersedes EN ISO 19712-3:2013
English Version
Plastics - Decorative solid surfacing materials - Part 3:
Determination of properties - Solid surface shapes (ISO
19712-3:2022)
Plastiques - Matériaux décoratifs massifs de Kunststoffe - Dekorative Mineralwerkstoffe - Teil 3:
revêtement de surface - Partie 3: Détermination des Prüfverfahren - Formteile (ISO 19712-3:2022)
propriétés - Produits mis en forme (ISO 19712-3:2022)
This European Standard was approved by CEN on 18 March 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19712-3:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 19712-3:2022) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2022, and conflicting national standards shall
be withdrawn at the latest by October 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 19712-3:2013.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 19712-3:2022 has been approved by CEN as EN ISO 19712-3:2022 without any
modification.
INTERNATIONAL ISO
STANDARD 19712-3
Second edition
2022-03
Plastics — Decorative solid surfacing
materials —
Part 3:
Determination of properties — Solid
surface shapes
Plastiques — Matériaux décoratifs massifs de revêtement de
surface —
Partie 3: Détermination des propriétés — Produits mis en forme
Reference number
ISO 19712-3:2022(E)
ISO 19712-3:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
ISO 19712-3:2022(E)
Contents Page
Foreword . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Cleaning the test specimen surface .2
4.1 General . 2
4.2 Materials . 2
4.3 Procedure . 2
5 Surface defects . 2
5.1 Procedure . 2
5.2 Method of inspection of surface . 3
5.3 Performance requirements . 3
5.4 Test report . 3
6 Resistance to impact by large-diameter ball . 3
6.1 Principle . 3
6.2 Test specimen . 3
6.3 Procedure . 3
6.4 Performance requirement . 4
6.5 Test report . 4
7 Lightfastness . 5
7.1 Method A . 5
7.1.1 Principle . 5
7.1.2 Apparatus . 5
7.1.3 Test specimen . 5
7.1.4 Procedure . 5
7.1.5 Assessment of specimen and expression of results . 6
7.1.6 Test report . 6
7.2 Method B . 6
7.2.1 Principle . 6
7.2.2 Materials . 7
7.2.3 Apparatus . 7
7.2.4 Standardization of apparatus . 7
7.2.5 Test specimens . 7
7.2.6 Procedure . 7
7.2.7 Expression of results . 8
7.2.8 Test report . 8
7.3 Method C (resistance to colour change in light from an enclosed carbon-arc lamp) . 9
7.3.1 Principle . 9
7.3.2 Apparatus . 9
7.3.3 Test specimen . 9
7.3.4 Procedure . 9
7.3.5 Evaluation and expression of results . 9
7.3.6 Test report . 9
8 Stain/chemical-resistance test .
...