EN 12123:2022

Chemicals used for treatment of water intended for human consumption - Ammonium sulfate

EN 12123:2022

Name:EN 12123:2022   Standard name:Chemicals used for treatment of water intended for human consumption - Ammonium sulfate
Standard number:EN 12123:2022   language:English language
Release Date:19-Apr-2022   technical committee:CEN/TC 164 - Water supply
Drafting committee:CEN/TC 164/WG 9 - Drinking water treatment   ICS number:71.100.80 - Chemicals for purification of water

SLOVENSKI STANDARD
01-junij-2022
Nadomešča:
SIST EN 12123:2013
Kemikalije, ki se uporabljajo za pripravo pitne vode - Amonijev sulfat
Chemicals used for treatment of water intended for human consumption - Ammonium
sulfate
Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch -
Ammoniumsulfat
Produits chimiques utilisés pour le traitement de l’eau destinée à la consommation
humaine - Sulfate d'ammonium
Ta slovenski standard je istoveten z: EN 12123:2022
ICS:
13.060.20 Pitna voda Drinking water
71.100.80 Kemikalije za čiščenje vode Chemicals for purification of
water
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 12123
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2022
EUROPÄISCHE NORM
ICS 71.100.80 Supersedes EN 12123:2012
English Version
Chemicals used for treatment of water intended for human
consumption - Ammonium sulfate
Produits chimiques utilisés pour le traitement de l'eau Produkte zur Aufbereitung von Wasser für den
destinée à la consommation humaine - Sulfate menschlichen Gebrauch - Ammoniumsulfat
d'ammonium
This European Standard was approved by CEN on 13 March 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12123:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitons . 6
4 Description . 6
4.1 Identification . 6
4.1.1 Chemical name . 6
4.1.2 Synonym or commons name . 6
4.1.3 Relative molecular mass . 6
4.1.4 Empirical formula . 7
4.1.5 Chemical formula . 7
4.1.6 CAS-Registry Number . 7
4.1.7 EINECS reference . 7
4.2 Commercial form . 7
4.3 Physical properties . 7
4.3.1 Appearance . 7
4.3.2 Density . 7

4.3.3 Solubility in water . 7
4.3.4 Vapour pressure . 7
4.3.5 Boiling point at 100 kPa . 7
4.3.6 Crystallization point . 7
4.3.7 Specific heat . 7
4.3.8 Viscosity dynamic . 7
4.3.9 Critical temperature . 7
4.3.10 Critical pressure . 8
4.3.11 Physical hardness . 8
4.4 Chemical properties . 8
5 Purity criteria . 8
5.1 General. 8
5.2 Composition of commercial product . 8
5.3 Impurities and main by-products . 9
5.4 Chemical parameters. 9
6 Test methods . 9
6.1 Sampling . 9
6.2 Analyses. 10
6.2.1 Main product . 10
6.2.2 Impurities . 10
6.2.3 Chemical parameters. 10
7 Labelling, transportation, storage . 15
7.1 Means of delivery . 15
7.2 Labelling according to the EU legislation . 15
7.3 Transportation regulations and labelling . 15
7.4 Marking . 15
7.5 Storage . 15
7.5.1 Long term stability . 15
7.5.2 Storage incompatibilities . 15
Annex A (informative) General information on ammonium sulfate . 16
A.1 Origin . 16
A.1.1 Raw materials . 16
A.1.2 Manufacturing process . 16
A.2 Use . 16
A.2.1 Function . 16
A.2.2 Form in which it is used . 16
A.2.3 Treatment dose . 16
A.2.4 Means of application. 16
A.2.5 Secondary effects . 16
A.2.6 Removal of excess product . 16
Annex B (normative) General rules relating to safety . 17
B.1 Rules for safe handling and use . 17
B.2 Emergency procedures . 17
B.2.1 First aid . 17
B.2.2 Spillage . 17
B.2.3 Fire . 17
Bibliography . 18
European foreword
This document (EN 12123:2022) has been prepared by Technical Committee CEN/TC 164 “Water
supply”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2022, and conflicting national standards shall
be withdrawn at the latest by October 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12123:2012.
In comparison with the previous edition EN 12123:2012, the following technical modifications have
been made:
a) modification of 7.3 on transportation regulations and labelling, adding the sentence “The user shall
be aware of the incompatibilities between transported products.”;
b) modification of 7.4 on marking. The requirements of marking are also applied to the accompanying
documents.
Any feedback and questions on this document should be directed to the users’ national sta
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27