|
SLOVENSKI STANDARD
01-september-2022
Nadomešča:
SIST EN ISO 9016:2013
Porušitveno preskušanje zvarnih spojev na kovinskih materialih - Udarni preskusi
- Položaj preskušanca, smer zareze in preiskava (ISO 9016:2022)
Destructive tests on welds in metallic materials - Impact tests - Test specimen location,
notch orientation and examination (ISO 9016:2022)
Zerstörende Prüfung von Schweißverbindungen an metallischen Werkstoffen -
Kerbschlagbiegeversuch - Probenlage, Kerbrichtung und Beurteilung (ISO 9016:2022)
Essais destructifs des soudures sur matériaux métalliques - Essai de flexion par choc -
Position de l'éprouvette, orientation de l'entaille et examen (ISO 9016:2022)
Ta slovenski standard je istoveten z: EN ISO 9016:2022
ICS:
25.160.40 Varjeni spoji in vari Welded joints and welds
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 9016
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2022
EUROPÄISCHE NORM
ICS 25.160.40 Supersedes EN ISO 9016:2012
English Version
Destructive tests on welds in metallic materials - Impact
tests - Test specimen location, notch orientation and
examination (ISO 9016:2022)
Essais destructifs des soudures sur matériaux Zerstörende Prüfung von Schweißverbindungen an
métalliques - Essai de flexion par choc - Position de metallischen Werkstoffen - Kerbschlagbiegeversuch -
l'éprouvette, orientation de l'entaille et examen (ISO Probenlage, Kerbrichtung und Beurteilung (ISO
9016:2022) 9016:2022)
This European Standard was approved by CEN on 9 February 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9016:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 9016:2022) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2022, and conflicting national standards shall
be withdrawn at the latest by October 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9016:2012.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 9016:2022 has been approved by CEN as EN ISO 9016:2022 without any modification.
INTERNATIONAL ISO
STANDARD 9016
Third edition
2022-03
Destructive tests on welds in metallic
materials — Impact tests — Test
specimen location, notch orientation
and examination
Essais destructifs des soudures sur matériaux métalliques — Essai de
flexion par choc — Position de l'éprouvette, orientation de l'entaille et
examen
Reference number
ISO 9016:2022(E)
ISO 9016:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
ISO 9016:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Method of denomination . 1
5.1 Lettering system . 1
5.2 Characters. 1
5.3 Additional information. 2
6 Examples of denomination .2
7 Examination . 6
8 Test report . 6
Annex A (informative) Example of a test report. 7
Bibliography . 8
iii
ISO 9016:2022(E)
Foreword
ISO (the International O
...