|
SLOVENSKI STANDARD
01-junij-2022
Nadomešča:
SIST EN 14805:2009
Kemikalije, ki se uporabljajo za pripravo pitne vode - Natrijev klorid za pridobivanje
klora po elektrokemijskem postopku brez uporabe membranske tehnologije
Chemicals used for treatment of water intended for human consumption - Sodium
chloride for on site electrochlorination using non-membrane technology
Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Natriumchlorid
zur elektrochemischen Erzeugung von Chlor vor Ort mittels membranloser Verfahren
Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation
humaine - Chlorure de sodium pour la génération électrochimique de chlore utilisant des
technologies non membranaires
Ta slovenski standard je istoveten z: EN 14805:2022
ICS:
13.060.20 Pitna voda Drinking water
71.100.80 Kemikalije za čiščenje vode Chemicals for purification of
water
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 14805
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2022
EUROPÄISCHE NORM
ICS 71.100.80 Supersedes EN 14805:2008
English Version
Chemicals used for treatment of water intended for human
consumption - Sodium chloride for on site
electrochlorination using non-membrane technology
Produits chimiques utilisés pour le traitement de l'eau Produkte zur Aufbereitung von Wasser für den
destinée à la consommation humaine - Chlorure de menschlichen Gebrauch - Natriumchlorid zur
sodium pour la génération électrochimique de chlore elektrochemischen Erzeugung von Chlor vor Ort
utilisant des technologies non membranaires mittels membranloser Verfahren
This European Standard was approved by CEN on 20 March 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14805:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Description . 6
4.1 Identification . 6
4.2 Commercial forms . 6
4.3 Physical properties . 6
4.4 Chemical properties . 8
5 Purity criteria . 8
5.1 General . 8
5.2 Composition of commercial product . 8
5.3 Impurities and main by-products . 9
5.4 Chemical parameters . 9
6 Test methods . 10
6.1 Sampling . 10
6.2 Analyses . 10
7 Labelling - transportation - storage. 14
7.1 Means of delivery . 14
7.2 Risk and safety labelling in accordance with EU directives . 14
7.3 Transportation regulations and labelling . 14
7.4 Marking . 14
7.5 Storage . 15
Annex A (informative) General information on sodium chloride for electrochlorination . 16
Annex B (normative) Analytical methods . 18
Bibliography . 35
European foreword
This document (EN 14805:2022) has been prepared by Technical Committee CEN/TC 164 “Water
supply”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2022, and conflicting national standards shall
be withdrawn at the latest by October 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14805:2008.
In comparison with the previous edition EN 14805:2008, the following technical modifications have
been made:
a) modification of 7.3 on transportation regulations and labelling, adding the sentence “The user must
be aware of the incompatibilities between transported products.”;
b) modification of 7.4 on marking. The requirements of marking are also applied to the accompanying
documents;
c) deletion of reference to EU Directive 67/548/EEC of June 27, 1967 in order to take into account the
latest Regulation in force (see [2]);
d) EU Directive 98/83/EC (see [1]) of 3 November 1998 shall be taken into account the latest
Regulation in force for drinking water.
e) modification of moisture content in Table 2, to be in line with EN 973:2009 and EN 16401:2013.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Introduction
In respect of potential adverse effects on the quality of water intended for human consumption, caused
by the product covered by this document:
a) this document provides no information as to whether the product may be used without restriction
in any of the Member States of the EU or EFTA;
b) it should be noted that, while awaiting the adoption of verifiable European criteria, existing
national regulations concerning the use and/or the characteristics of this product remain in force.
NOTE 1 Conformity with this document does not confer or imply acceptance or approval of the product in any
of the Member States of the EU or EFTA. The use of the product covered by this document is subject to regulation
or control by National Authorities.
NOTE 2 This product could qualify as a biocide precursor and needs to comply with the relevant legislation in
force. In the European Union, at the time of publication, this legislation is Regulation (EU) No. 528/2012.
1 Scope
This document is applicable to sodium chloride intended for on-site electrochlorination of water
intended for human consumption using non-membrane technology. It describes the characteristics and
specifies the requirements and the corresponding test methods for sodium chloride (see Annex B). It
gives information on its use in water treatment.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 973:2009, Chemicals used for treatment of water intended for human consumption - Sodium chloride
for regeneration of ion exchangers
EN ISO 3696, Water for analytical laboratory use - Specification and test methods (ISO 3696)
ISO 2479, Sodium chloride for industrial use — Determination of matter insoluble in water or in acid and
preparation of principal solutions for other determinations
ISO 2480, Sodium chloride for industrial use — Determination of sulphate content — Barium sulphate
gravimetric method
ISO 2482, Sodium chloride for industrial use — Determination of calcium and magnesium contents —
EDTA complexometric methods
ISO 2483, Sodium chloride for industrial use — Determination of the loss of mass at 110 degrees C
ISO 3165, Sampling of chemical products for industrial use — Safety in sampling
ISO 6206, Chemical products for industrial use — Sampling — Vocabulary
ISO 6227, Chemical products for industrial use — General method for determination of chloride ions —
Potentiometric method
ISO 8213, Chemical products for industrial use — Sampling techniques — Solid chemical products in the
form of particles varying from powders to coarse lumps
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at
— IEC Electropedia: available at
4 Description
4.1 Identification
4.1.1 Chemical name
Sodium chloride
4.1.2 Synonym or common name
Salt
4.1.3 Relative molecular mass
58,45
4.1.4 Empirical formula
NaCl
4.1.5 Chemical formula
NaCl
4.1.6 CAS Registry Number
7647-14-5
4.1.7 EINECS Reference
231-598-3
4.2 Commercial forms
The product is available as rock salt, sea salt or evaporated salt, and it is supplied as free-flowing
crystals or their compacted forms.
4.3 Physical properties
4.3.1 Appearance
The product is white and crystalline.
4.3.2 Density
The density of the solid crystal is 2,16 g/cm at 20 °C.
The bulk density depends on the particle size distribution.
4.3.3 Solubility (in water)
The solubility of the product depends on the temperature as given in Figure 1.
Chemical Abstracts Service Registry Number.
European Inventory of Existing Commercial chemical Substances Reference.
Temperature NaCl solution
°C Mass fraction in %
- 10 25,0
0 26,34
10 26,35
20 26,43
30 26,56
40 26,71
50 26,89
60 27,09
70 27,30
80 27,53
90 27,80
100 28,12
Key
1 transition point
NaCl → NaCl . 2H O
Figure 1 — Solubility curve for sodium chloride in water
4.3.4 Vapour pressure
Not applicable.
4.3.5 Boiling point at 100 kPa
Not applicable.
4.3.6 Melting point
802 °C
4.3.7 Specific heat
Ap
...