EN ISO 12863:2022

Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2022)

EN ISO 12863:2022

Name:EN ISO 12863:2022   Standard name:Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2022)
Standard number:EN ISO 12863:2022   language:English language
Release Date:26-Apr-2022   technical committee:CEN/TC 401 - Project Committee - RIP Cigarettes
Drafting committee:CEN/TC 401 - Project Committee - RIP Cigarettes   ICS number:13.220.40 - Ignitability and burning behaviour of materials and products

SLOVENSKI STANDARD
01-junij-2022
Nadomešča:
SIST EN ISO 12863:2010
SIST EN ISO 12863:2010/A1:2016
SIST EN ISO 12863:2010/AC:2014
Standardna preskusna metoda za ocenjevanje nagnjenosti k vžigu cigaret (ISO
12863:2022)
Standard test method for assessing the ignition propensity of cigarettes (ISO
12863:2022)
Normprüfverfahren zur Beurteilung der Zündneigung von Zigaretten (ISO 12863:2022)
Méthode d'essai normalisée pour évaluer le potentiel incendiaire des cigarettes (ISO
12863:2022)
Ta slovenski standard je istoveten z: EN ISO 12863:2022
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
65.160 Tobak, tobačni izdelki in Tobacco, tobacco products
oprema and related equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 12863
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2022
EUROPÄISCHE NORM
ICS 13.220.40; 65.160 Supersedes EN ISO 12863:2010, EN ISO
12863:2010/AC:2011, EN ISO 12863:2010/A1:2016
English Version
Standard test method for assessing the ignition propensity
of cigarettes (ISO 12863:2022)
Méthode d'essai normalisée pour évaluer le potentiel Normprüfverfahren zur Beurteilung der Zündneigung
incendiaire des cigarettes (ISO 12863:2022) von Zigaretten (ISO 12863:2022)
This European Standard was approved by CEN on 28 March 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12863:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 12863:2022) has been prepared by Technical Committee ISO/TC 92 "Fire
safety" in collaboration with Technical Committee CEN/TC 401 “Reduced Ignition Propensity
Cigarettes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2022, and conflicting national standards shall
be withdrawn at the latest by October 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12863:2010.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 12863:2022 has been approved by CEN as EN ISO 12863:2022 without any modification.

INTERNATIONAL ISO
STANDARD 12863
Second edition
2022-04
Standard test method for assessing
the ignition propensity of cigarettes
Méthode d'essai normalisée pour évaluer le potentiel incendiaire des
cigarettes
Reference number
ISO 12863:2022(E)
ISO 12863:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
ISO 12863:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General principle .2
5 Apparatus . 2
5.1 General . 2
5.2 Test and conditioning environment . 2
5.2.1 General . 2
5.2.2 Conditioning room . 3
5.2.3 Conditioning box . 3
5.3 Test chamber . 3
5.4 Substrate holder . 3
5.5 Metal rim . 3
5.6 Cigarette holder . 4
5.7 Cigarette ignition system . 4
5.8 Exhaust hood . . 4
6 Verification of test equipment . 4
6.1 Frequency of verification . 4
6.2 Examination for chamber leakage . 4
6.3 Stability of chamber atmosphere . 4
6.4 Humidity and temperature sensors . 5
6.5 Test performance verification . 5
7 Test specimens and standard substrate assemblies . 5
7.1 Handling . 5
7.2 Cigarettes . 5
7.2.1 Cigarette sampling . 5
7.2.2 Care in handling and storage . 5
7.2.3 Markings . 6
7.3 Filter paper . 6
7.3.1 General description . . 6
7.3.2 Paper mass requirements . 6
7.3.3 Paper orientation . 6
8 Conditioning . 6
8.1 Cigarettes . 6
8.2 Filter paper . 7
9 Test procedure .7
10 Test record . 9
11 Test report . 9
Annex A (normative) Technical drawings of test apparatus .10
Annex B (informative) Estimation of placement of additional pins .14
Annex C (normative) Procedure for selection of substrate assemblies for testing .16
Annex D (informative) Repeatability and reproducibility .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27