|
SLOVENSKI STANDARD
01-januar-2023
Nadomešča:
SIST-TS CEN ISO/TS 21719-2:2018
Elektronsko pobiranje pristojbin - Personalizacija (prilagajanje) opreme vozil - 2.
del: Uporaba posebne komunikacije kratkega dosega (ISO/TS 21719-2:2022)
Electronic fee collection - Personalization of on-board equipment (OBE) - Part 2: Using
dedicated short-range communication (ISO/TS 21719-2:2022)
Elektronische Gebührenerhebung - Personalisierung von Onboard Einrichtungen - Teil 2:
Verwendung von dedizierter Nahbereichskommunikation (ISO/TS 21719-2:2022)
Perception de télépéage - Personnalisation des équipements embarqués - Partie 2:
Utilisation des communications dédiées à courte portée (ISO/TS 21719-2:2022)
Ta slovenski standard je istoveten z: CEN ISO/TS 21719-2:2022
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
CEN ISO/TS 21719-2
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
November 2022
TECHNISCHE SPEZIFIKATION
ICS 03.220.20; 35.240.60 Supersedes CEN ISO/TS 21719-2:2018
English Version
Electronic fee collection - Personalization of on-board
equipment (OBE) - Part 2: Using dedicated short-range
communication (ISO/TS 21719-2:2022)
Perception de télépéage - Personnalisation des Elektronische Gebührenerhebung - Personalisierung
équipements embarqués - Partie 2: Utilisation des von Onboard Einrichtungen - Teil 2: Verwendung von
communications dédiées à courte portée (ISO/TS dedizierter Nahbereichskommunikation (ISO/TS
21719-2:2022) 21719-2:2022)
This Technical Specification (CEN/TS) was approved by CEN on 6 October 2022 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 21719-2:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (CEN ISO/TS 21719-2:2022) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 21719-2:2018.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO/TS 21719-2:2022 has been approved by CEN as CEN ISO/TS 21719-2:2022 without any
modification.
TECHNICAL ISO/TS
SPECIFICATION 21719-2
Second edition
2022-10
Electronic fee collection —
Personalization of on-board
equipment (OBE) —
Part 2:
Using dedicated short-range
communication
Perception de télépéage — Personnalisation des équipements
embarqués —
Partie 2: Utilisation des communications dédiées à courte portée
Reference number
ISO/TS 21719-2:2022(E)
ISO/TS 21719-2:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
ISO/TS 21719-2:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Abbreviated terms . 4
5 Conformance . 5
5.1 General . 5
5.2 Base standards . 5
5.3 Main contents of an EFC personalization AP . 5
5.4 Conformance statement . 6
6 Personalization overview .6
6.1 Process . 6
6.2 System architecture . 6
7 OBE requirements .6
7.1 General . 6
7.2 DSRC lower layer requirements . 6
7.2.1 Supported DSRC stacks . 6
7.2.2 CEN DSRC stack . 7
7.3 OBE personalization functions. 8
7.3.1 General . 8
7.3.2 Initialization and termination . 8
7.3.3 Retrieving the OBE identifier . 8
7.3.4 Writing of data . 8
7.4 Security requirements . . 11
7.5 Transaction requirements .12
8 Personalization equipment requirements .13
8.1 General .13
8.2 DSRC lower layer requirements .13
8.2.1 Supported DSRC stacks .13
8.2.2 CEN DSRC stack .13
8.3 PE personalization functions . .13
8.4 Security requirements . . 13
8.5 Transaction requirements .13
Annex A (normative) Security calculations .14
Annex B (normative) PICS proforma . .19
Annex C (normative) Personalization of OBE conforming to ETSI ES 200 674-1 .24
Annex D (informative) Transaction example .29
Annex E (informative) Security computation examples .33
Bibliography .37
iii
ISO/TS 21719-2:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on th
...