EN 13255:2014/FprA1

Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals

EN 13255:2014/FprA1

Name:EN 13255:2014/FprA1   Standard name:Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
Standard number:EN 13255:2014/FprA1   language:English language
Release Date:   technical committee:CEN/TC 189 - Geotextiles and geotextile-related products
Drafting committee:CEN/TC 189/WG 1 - ad hoc group Asphalt reinforcement   ICS number:59.080.70 - Geotextiles
SLOVENSKI STANDARD
SIST EN 13255:2014/kFprA1:2014
01-september-2014
*HRWHNVWLOLMHLQJHRWHNVWLOLMDPVRURGQLL]GHONL=QDþLOQRVWLNLVH]DKWHYDMRSUL
JUDGQMLNDQDORY
Geotextiles and geotextile-related products - Characteristics required for use in the
construction of canals
Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die
Anwendung beim Kanalbau
Géotextiles et produits apparentés - Caractéristiques requises pour l’utilisation dans la
construction de canaux
Ta slovenski standard je istoveten z: EN 13255:2014/FprA1
ICS:
59.080.70 Geotekstilije Geotextiles
93.020 Zemeljska dela. Izkopavanja. Earthworks. Excavations.
Gradnja temeljev. Dela pod Foundation construction.
zemljo Underground works
SIST EN 13255:2014/kFprA1:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13255:2014/kFprA1:2014

---------------------- Page: 2 ----------------------

SIST EN 13255:2014/kFprA1:2014

EUROPEAN STANDARD
FINAL DRAFT
EN 13255:2014
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
June 2014
ICS 59.080.70
English Version
Geotextiles and geotextile-related products - Characteristics
required for use in the construction of canals
Géotextiles et produits apparentés - Caractéristiques Geotextilien und geotextilverwandte Produkte - Geforderte
requises pour l'utilisation dans la construction de canaux Eigenschaften für die Anwendung beim Kanalbau
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 189.

This draft amendment A1, if approved, will modify the European Standard EN 13255:2014. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13255:2014/FprA1:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13255:2014/kFprA1:2014
EN 13255:2014/FprA1:2014 (E)
Contents
Page
Foreword .3
1 Modification to Clause 2 .4
2 Modification to Annex B .4


2

---------------------- Page: 4 ----------------------

SIST EN 13255:2014/kFprA1:2014
EN 13255:2014/FprA1:2014 (E)
Foreword
This document (EN 13255:2014/FprA1:2014) has been prepared by Technical Committee CEN/TC 189
“Geosynthetics”, the secretariat of which is held by NBN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
NOTE Due to fact that the Framework Partnership Agreement between the Commission and CEN & CENELEC is not
signed yet, there are currently no New Approach Consultants in place for 2014. Therefore the provisions of CEN-
CENELEC Guide 15 cannot be met.
This shall not prevent the processing of draft sta
...

  • Relates Information
  • IEC 60300-3-7:1999

    IEC 60300-3-7:1999 - Dependability management - Part 3-7: Application guide - Reliability stress screening of electronic hardware Released:5/31/1999 Isbn:2831847974
    09-20
  • HD 571 S1:1990

    HD 571 S1:1998
    09-20
  • ISO 8130-4:1992

    ISO 8130-4:1992 - Coating powders
    09-20
  • HD 478.2.7 S1:1990

    HD 478.2.7 S1:2003
    09-19
  • ISO 8473:1988/Cor 1:1992

    ISO 8473:1988/Cor 1:1992 - Information processing systems — Data communications — Protocol for providing the connectionless-mode network service — Technical Corrigendum 1 Released:12/10/1992
    09-19
  • EN ISO 9013:2017/prA1

    EN ISO 9013:2017/oprA1:2024
    09-19
  • IEC 60118-6:1999

    IEC 60118-6:1999 - Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids Released:6/9/1999 Isbn:2831848075
    09-19
  • HD 280.3 S1:1990

    HD 280.3 S1:1999
    09-19
  • ISO 9832:1992

    ISO 9832:1992 - Animal and vegetable fats and oils -- Determination of residual technical hexane content
    09-19
  • EN 60188:1988/A1:1990

    EN 60188:1999/A1:1999
    09-18