EN 474-6:2006/prA1

Earth-moving machinery - Safety - Part 6: Requirements for dumpers

EN 474-6:2006/prA1

Name:EN 474-6:2006/prA1   Standard name:Earth-moving machinery - Safety - Part 6: Requirements for dumpers
Standard number:EN 474-6:2006/prA1   language:English language
Release Date:   technical committee:CEN/TC 151 - Construction equipment and building material machines - Safety
Drafting committee:CEN/TC 151/WG 1 - Earth-moving machinery - Safety   ICS number:53.100 - Earth-moving machinery
SLOVENSKI STANDARD
SIST EN 474-6:2007/kprA1:2008
01-oktober-2008
Stroji za zemeljska dela - Varnost - 6. del: Zahteve za prekucnike
Earth-moving machinery - Safety - Part 6: Requirements for dumpers
Erdbaumaschinen - Sicherheit - Teil 6: Anforderungen für Muldenfahrzeuge
Engins de terrassement - Sécurité - Partie 6: Prescriptions applicables aux tombereaux
Ta slovenski standard je istoveten z: EN 474-6:2006/prA1
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN 474-6:2007/kprA1:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 474-6:2007/kprA1:2008

---------------------- Page: 2 ----------------------

SIST EN 474-6:2007/kprA1:2008
EUROPEAN STANDARD
FINAL DRAFT
EN 474-6:2006
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2008
ICS 53.100

English Version
Earth-moving machinery - Safety - Part 6: Requirements for
dumpers
Engins de terrassement - Sécurité - Partie 6: Prescriptions Erdbaumaschinen - Sicherheit - Teil 6: Anforderungen für
applicables aux tombereaux Muldenfahrzeuge
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 151.
This draft amendment A1, if approved, will modify the European Standard EN 474-6:2006. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27