|
SLOVENSKI STANDARD
01-januar-2023
Razvedrilna tehnologija - Specifikacije za projektiranje in izdelavo aluminijastih
odrov in okvirjev
Entertainment technology - Specifications for design and manufacture of aluminium
stage decks and frames
Veranstaltungstechnik - Anforderungen an die Bemessung und Herstellung von
Podesten und Zargen aus Aluminium
Technologies du spectacle - Spécifications pour la conception et la fabrication de
praticables de scène en aluminium
Ta slovenski standard je istoveten z: EN 17736:2022
ICS:
91.080.17 Aluminijaste konstrukcije Aluminium structures
97.200.10 Gledališka, odrska in Theatre, stage and studio
studijska oprema ter delovne equipment
postaje
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 17736
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2022
EUROPÄISCHE NORM
ICS 97.200.10
English Version
Entertainment technology - Specifications for design and
manufacture of aluminium stage decks and frames
Technologies du spectacle - Spécifications pour la Veranstaltungstechnik - Anforderungen an die
conception et la fabrication de praticables de scène en Bemessung und Herstellung von Podesten und Zargen
aluminium aus Aluminium
This European Standard was approved by CEN on 12 September 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17736:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 List of significant hazards . 7
5 Engineering . 9
5.1 General . 9
5.2 Design . 9
5.3 Analysis . 9
5.3.1 General . 9
5.3.2 Load assumptions . 9
5.4 Engineering documentation . 10
6 Manufacture . 10
6.1 General . 10
6.2 Materials . 10
6.2.1 General . 10
6.2.2 Fire behaviour . 10
6.2.3 Surface condition . 11
6.3 Welding . 11
6.4 Inspection . 11
6.5 Identification . 11
6.6 Manufacturing documentation . 11
7 Additional design requirements for stairs, ramps and guardrails . 11
7.1 Stairs . 11
7.2 Ramps . 12
7.3 Guardrails . 12
7.3.1 General . 12
7.3.2 Guardrails for stages . 12
7.3.3 Guardrails for areas with public access . 13
7.4 Alignment of stage decks . 13
8 Ancillary items . 13
9 Test requirements and procedures . 13
9.1 General . 13
9.2 Preperation of the test . 14
9.3 Vertical test loads . 14
9.3.1 Uniformly distributed load (UDL) . 14
9.3.2 Point load . 14
9.4 Horizontal test load . 14
9.5 Verification of test results . 14
9.6 Documentation of test results . 14
10 User documentation and technical data sheet . 15
10.1 User documentation . 15
10.2 Technical data sheet . 15
Annex A (informative) Technical data sheet example. 16
Annex B (informative) Example of test setups for testing aluminium stage decks and
frames . 18
B.1 General . 18
B.2 Application of test loads . 18
Annex C (informative) Test report examples . 20
C.1 Example of test report for stage decks or frames . 20
C.2 Example of test report for guardrails . 21
Annex D (informative) Inspection report example . 23
Bibliography . 24
European foreword
This document (EN 17736:2022) has been prepared by Technical Committee CEN/TC 433
“Entertainment Technology - Machinery, equipment and installations”, the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2023, and conflicting national standards shall be
withdrawn at the latest by May 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This is a type C standard as specified in EN ISO 12100.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
Introduction
The object of this document is to achieve a minimum level of quality in the design and manufacture of
aluminium stage decks and frames in the entertainment industry.
Entertainment technology is an interdisciplinary field with specific technology and unique safety
requirements. Entertainment technology is used in places of assembly, staging and production areas for
events and theatrical productions. Such locations include but are not limited to theatres, multi-purpose
halls, exhibition halls, film-, television-, photography- and radio-studios as well as facilities in concert
halls, museums, schools, bars, discotheques, open-air stages and other places for shows and events. In
some cases, atypical non-performance places are also used.
This document has been developed based on the previous requirements of DIN 15921:2015-09.
This document has been drawn up according to past experience and risk analysis.
1 Scope
This document specifies the requirements for the design and manufacture of aluminium decks and frames
used in the entertainment industry.
This document does not apply to scaffolding used as substructures in stage and studio environments in
accordance with the EN 12810 series and the EN 12811 series or fairground rides in accordance with
EN 13814-1.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitute
...