|
SLOVENSKI STANDARD
01-februar-2023
Nadomešča:
SIST EN ISO 4628-5:2016
Barve in laki - Ovrednotenje propadanja premazov - Ugotavljanje obsega in
velikosti poškodb ter intenzitete enakomernih sprememb videza - 5. del:
Ocenjevanje stopnje luščenja (ISO 4628-5:2022)
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity
and size of defects, and of intensity of uniform changes in appearance - Part 5:
Assessment of degree of flaking (ISO 4628-5:2022)
Beschichtungsstoffe - Beurteilung von Beschichtungsschäden - Bewertung der Menge
und der Größe von Schäden und der Intensität von gleichmäßigen Veränderungen im
Aussehen - Teil 5: Bewertung des Abblätterungsgrades (ISO 4628-5:2022)
Peintures et vernis - Évaluation de la dégradation des revêtements - Désignation de la
quantité et de la dimension des défauts, et de l'intensité des changements uniformes
d'aspect - Partie 5: Évaluation du degré d'écaillage (ISO 4628-5:2022)
Ta slovenski standard je istoveten z: EN ISO 4628-5:2022
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 4628-5
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2022
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 4628-5:2016
English Version
Paints and varnishes - Evaluation of degradation of
coatings - Designation of quantity and size of defects, and
of intensity of uniform changes in appearance - Part 5:
Assessment of degree of flaking (ISO 4628-5:2022)
Peintures et vernis - Évaluation de la dégradation des Beschichtungsstoffe - Beurteilung von
revêtements - Désignation de la quantité et de la Beschichtungsschäden - Bewertung der Menge und der
dimension des défauts, et de l'intensité des Größe von Schäden und der Intensität von
changements uniformes d'aspect - Partie 5: Évaluation gleichmäßigen Veränderungen im Aussehen - Teil 5:
du degré d'écaillage (ISO/FDIS 4628-5:2022) Bewertung des Abblätterungsgrades (ISO/FDIS 4628-
5:2022)
This European Standard was approved by CEN on 13 November 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4628-5:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 4628-5:2022) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2023, and conflicting national standards shall be
withdrawn at the latest by May 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4628-5:2016.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 4628-5:2022 has been approved by CEN as EN ISO 4628-5:2022 without any
modification.
INTERNATIONAL ISO
STANDARD 4628-5
Fourth edition
2022-11
Paints and varnishes — Evaluation
of quantity and size of defects, and
of intensity of uniform changes in
appearance —
Part 5:
Assessment of degree of flaking
Peintures et vernis — Évaluation de la quantité et de la dimension des
défauts, et de l’intensité des changements uniformes d’aspect —
Partie 5: Évaluation du degré d’écaillage
Reference number
ISO 4628-5:2022(E)
ISO 4628-5:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
ISO 4628-5:2022(E)
Contents Page
Foreword .iv
1 S c op e . 1
2 Nor m at i ve r ef er enc e s . 1
3 T erms and definitions . 1
4 A ss e ss ment . .1
5 E xpression of results . 2
6 Test report .
...