|
oSIST prEN 15466-3:2006
01-april-2006
Primers for cold and hot applied joint sealants - Part 3: Test method for the
determination of drying behaviour and solids content
Primers for cold and hot applied joint sealants - Part 3: Test method for the determination
of drying behaviour and solids content
Voranstriche für kalt und heiß verarbeitbare Fugenmassen - Teil 3: Prüfverfahren zur
Bestimmung des Trocknungsverhaltens und des Feststoffanteils
Primaires pour produits de scellement de joints appliqués a froid et a chaud - Partie 3 :
Méthode d'essai pour la détermination du comportement au séchage et de la teneur en
matieres solides
Ta slovenski standard je istoveten z: prEN 15466-3
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 15466-3:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 15466-3:2006
---------------------- Page: 2 ----------------------
oSIST prEN 15466-3:2006
EUROPEAN STANDARD
DRAFT
prEN 15466-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2006
ICS
English Version
Primers for cold and hot applied joint sealants - Part 3: Test
method for the determination of drying behaviour and solids
content
Primaires pour produits de scellement de joints appliqués à Voranstriche für kalt und heiß verarbeitbare Fugenmassen -
froid et à chaud - Partie 3 : Méthode d'essai pour la Teil 3: Prüfverfahren zur Bestimmung des
détermination du comportement au séchage et de la teneur Trocknungsverhaltens und des Feststoffanteils
en matières solides
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 227.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15466-3:2006: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15466-3:2006
prEN 15466-3:2006 (E)
Contents Page
Foreword.3
1 Scope.3
2 Normative references.3
3 Terms and definitions .3
4 Principle.4
5 Apparatus.4
6 Procedure.4
6.1 Conditioning.4
6.2 Drying behaviour.4
6.3 Solids content.4
7 Calculation of results.5
7.1 Drying behaviour.5
7.2 Solids content.5
8 Expression of results.6
9 Test report.
...