|
SIST EN 474-7:2007/kprA1:2008
01-oktober-2008
Stroji za zemeljska dela - Varnost - 7. del: Zahteve za grabilnike (skreperje)
Earth-moving machinery - Safety - Part 7: Requirements for scrapers
Erdbaumaschinen - Sicherheit - Teil 7: Anforderungen für Scraper
Engins de terrassement - Sécurité - Partie 7: Prescriptions applicables aux décapeuses
Ta slovenski standard je istoveten z: EN 474-7:2006/prA1
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN 474-7:2007/kprA1:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 474-7:2007/kprA1:2008
---------------------- Page: 2 ----------------------
SIST EN 474-7:2007/kprA1:2008
EUROPEAN STANDARD
FINAL DRAFT
EN 474-7:2006
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
June 2008
ICS 53.100
English Version
Earth-moving machinery - Safety - Part 7: Requirements for
scrapers
Engins de terrassement - Sécurité - Partie 7: Prescriptions Erdbaumaschinen - Sicherheit - Teil 7: Anforderungen für
applicables aux décapeuses Scraper
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 151.
This draft amendment A1, if approved, will modify the European Standard EN 474-7:2006. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 474-7:2006/prA1:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 474-7:2007/kprA1:2008
EN 474-7:2006/prA1:2008 (E)
Foreword
This document (EN 474-7:2006/prA1:2008) has been pre
...