|
SIST EN 3660-063:2022
01-julij-2022
Nadomešča:
SIST EN 3660-063:2016
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje -
063. del: Kabelska spojka, tip K, ravna, za toplotno skrčljive dele, oklopljena,
tesnjena, samozapiralna - Standard za proizvod
Aerospace series - Cable outlet accessories for circular and rectangular electrical and
optical connectors - Part 063: Cable outlet, style K, straight, for heat shrinkable boot,
shielded, sealed, self-locking - Product standard
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und
Rechtecksteckverbinder - Teil 063: Endgehäuse, Bauform K, gerade, für
wärmeschrumpfende Bauteile, Schirmanschluß, abgedichtet, selbstsichernd -
Produktnorm
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires
électriques et optiques - Partie 063 : Raccord, type K, droit, blindé, étanche, pour
manchon thermorétractable, à freinage interne - Norme de produit
Ta slovenski standard je istoveten z: EN 3660-063:2022
ICS:
31.220.99 Druge elektromehanske Other electromechanical
komponente components
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3660-063:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 3660-063:2022
---------------------- Page: 2 ----------------------
SIST EN 3660-063:2022
EN 3660-063
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2022
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3660-063:2015
English Version
Aerospace series - Cable outlet accessories for circular and
rectangular electrical and optical connectors - Part 063:
Cable outlet, style K, straight, for heat shrinkable boot,
shielded, sealed, self-locking - Product standard
Série aérospatiale - Accessoires arrière pour Luft- und Raumfahrt - Endgehäuse für elektrische und
connecteurs circulaires et rectangulaires électriques et optische Rund- und Rechtecksteckverbinder - Teil 063:
optiques - Partie 063 : Raccord, type K, droit, blindé, Endgehäuse, Bauform K, gerade, für
étanche, pour manchon thermorétractable, à freinage wärmeschrumpfende Bauteile, Schirmanschluß,
interne - Norme de produit abgedichtet, selbstsichernd - Produktnorm
This European Standard was approved by CEN on 2 September 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3660-063:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3660-063:2022
EN 3660-063:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Characteristics . 5
5 Tests . 12
...