|
SLOVENSKI STANDARD
01-september-2022
Nadomešča:
SIST EN 838:2010
Zrak na delovnem mestu - Plini in pare - Zahteve za vrednotenje merilnih
postopkov z difuzijskimi vzorčevalniki (ISO 23320:2022)
Workplace air - Gases and vapours - Requirements for evaluation of measuring
procedures using diffusive samplers (ISO 23320:2022)
Luft am Arbeitsplatz - Gase und Dämpfe - Anforderungen an die Evaluierung von
Messverfahren mit Diffusionssammlern (ISO 23320:2022)
Air des lieux de travail - Gazes et vapeurs - Exigences pour l'évaluation des procédures
pour le mesurage à l'aide de dispositifs de prélèvement par diffusion (ISO 23320:2022)
Ta slovenski standard je istoveten z: EN ISO 23320:2022
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 23320
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2022
EUROPÄISCHE NORM
ICS 13.040.30 Supersedes EN 838:2010
English Version
Workplace air - Gases and vapours - Requirements for
evaluation of measuring procedures using diffusive
samplers (ISO 23320:2022)
Air des lieux de travail - Gazes et vapeurs - Exigences Luft am Arbeitsplatz - Gase und Dämpfe -
pour l'évaluation des procédures pour le mesurage à Anforderungen an die Evaluierung von Messverfahren
l'aide de dispositifs de prélèvement par diffusion (ISO mit Diffusionssammlern (ISO 23320:2022)
23320:2022)
This European Standard was approved by CEN on 13 March 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23320:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 23320:2022) has been prepared by Technical Committee ISO/TC 146 "Air
quality" in collaboration with Technical Committee CEN/TC 137 “Assessment of workplace exposure to
chemical and biological agents” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2022, and conflicting national standards
shall be withdrawn at the latest by November 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 838:2010.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 23320:2022 has been approved by CEN as EN ISO 23320:2022 without any modification.
INTERNATIONAL ISO
STANDARD 23320
First edition
2022-04
Workplace air — Gases and vapours
— Requirements for evaluation of
measuring procedures using diffusive
samplers
Air des lieux de travail — Gazes et vapeurs — Exigences pour
l'évaluation des procédures pour le mesurage à l'aide de dispositifs de
prélèvement par diffusion
Reference number
ISO 23320:2022(E)
ISO 23320:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
ISO 23320:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms.1
5 Types of samplers. 3
6 Requirements . 3
6.1 General . 3
6.2 Sampler requirements . 3
6.2.1 Nominal uptake rate . 3
6.2.2 Air velocity/sampler orientation . 3
6.2.3 Sampler leak test . 4
6.2.4 Shelf life . 4
6.2.5 Sampler identification (for commercially available diffusive samplers) . 4
6.2.6 Marking . . . 4
6.2.7 Instructions for use. 4
6.3 Measuring procedure requirements . 5
6.3.1 Sampling procedure requirements . 5
6.3.2 Analytical procedure requirements . 5
6.3.3 Expanded uncertainty . 6
6.3.4 Method description . 6
7 General test conditions .7
7.1 Reagents . 7
7.2 Apparatus . 7
7.3 Independent method . 7
7.4 Generation of a calibration gas mixture . 8
7.4.1 General . 8
7.4.2 Determination of mass concentration. 8
8 Test methods . 9
8.1 General . 9
8.2 Sampler test methods . 9
8.2.1 Determination of (nominal) uptake rate . 9
8.2.2 Air velocity . . . 10
8.2.3 Sampler leak test . 11
8.2.4 Shelf life (for Type A impregnated supports) . . 11
8.2.5 Sampler identification .12
8.2.6 Marking . . 12
8.2.7 Instructions for use.12
8.3 Measuring procedure test methods .12
8.3.1 Determination of the sampling conditions .12
8.3.2 Analytical procedure test methods . 13
8.3.3 Method recovery and method precision . 15
8.4 Uncertainty of measurement . 17
8.4.1 Identification of random and non-random uncertainty components . 17
8.4.2 Estimation of individ
...