|
SLOVENSKI STANDARD
01-julij-2022
Akustika - Hrup s strelišč - 6. del: Meritve zvočnega tlaka v bližini vira za določanje
izpostavljenosti zvoku (ISO 17201-6:2021)
Acoustics - Noise from shooting ranges - Part 6: Sound pressure measurements close to
the source for determining exposure to sound (ISO 17201-6:2021)
Akustik - Geräusche von Schießplätzen - Teil 6: Schalldruckmessung im Nahbereich der
Geräuschquelle zur Bestimmung der Schallexposition (ISO 17201-6:2021)
Acoustique - Bruit des stands de tir - Partie 6: Mesurages de la pression sonore près de
la source pour déterminer l’exposition au son (ISO 17201-6:2021)
Ta slovenski standard je istoveten z: EN ISO 17201-6:2022
ICS:
13.140 Vpliv hrupa na ljudi Noise with respect to human
beings
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
95.020 Vojaštvo na splošno Military in general
97.220.10 Športni objekti Sports facilities
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 17201-6
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2022
EUROPÄISCHE NORM
ICS 13.140; 17.140.20; 95.020; 97.220.10
English Version
Acoustics - Noise from shooting ranges - Part 6: Sound
pressure measurements close to the source for
determining exposure to sound (ISO 17201-6:2021)
Acoustique - Bruit des stands de tir - Partie 6: Akustik - Geräusche von Schießplätzen - Teil 6:
Mesurages de la pression sonore près de la source pour Schalldruckmessung im Nahbereich der
déterminer l'exposition au son (ISO 17201-6:2021) Geräuschquelle zur Bestimmung der Schallexposition
(ISO 17201-6:2021)
This European Standard was approved by CEN on 13 April 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17201-6:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 17201-6:2021 has been prepared by Technical Committee ISO/TC 43 "Acoustics” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 17201-6:2022
by Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2022, and conflicting national standards
shall be withdrawn at the latest by November 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 17201-6:2021 has been approved by CEN as EN ISO 17201-6:2022 without any
modification.
INTERNATIONAL ISO
STANDARD 17201-6
First edition
2021-07
Acoustics — Noise from shooting
ranges —
Part 6:
Sound pressure measurements
close to the source for determining
exposure to sound
Acoustique — Bruit des stands de tir —
Partie 6: Mesurages de la pression sonore près de la source pour
déterminer l’exposition au son
Reference number
ISO 17201-6:2021(E)
©
ISO 2021
ISO 17201-6:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
ISO 17201-6:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Measurement system requirements . 2
4.1 General . 2
4.2 Ranges of sound pressure levels . 2
4.3 Overall system description . 2
4.4 Microphone and preamplifier requirements . 3
4.5 Microphone fixture . 3
4.6 Cable length . 3
4.7 Wind screens . 4
4.8 Data acquisition system . 4
4.9 Data storage . 4
4.10 Frequency-weighting . 4
4.11 Field calibration . 4
5 Measurement setup . 5
5.1 General considerations . 5
5.2 Measurement location . 5
5.3 Special case: Weapons fixture . 5
5.4 Persons in the shooting range . 5
5.5 Simultaneous multi-location measurements . 6
5.6 Exception: Absence of persons influencing the exposure to sound . 6
5.7 Microphone orientation . 6
5.8 Weather and ambient conditions . 6
6 Documentation . 6
6.1 General . 6
6.2 Shooting range . 6
6.3 Absorbing and reflecting elements. 6
6.4 Sound source documentation . 6
6.5 Location of the primary source of the sound . 6
6.6 Shooter . 7
6.7 Measurement location . 7
6.8 Weather and ambient conditions . 7
7 Data evaluation and uncertainties . 7
7.1 General . 7
7.2 Evaluating discrete time data . 7
7.3 Frequency-weighting . 7
7.4 Measurement uncertainties . 8
Annex A (informative) Slew rate limitations for impulse sound measurements .9
Annex B (informative) Calculations with discrete-time data .13
Annex C (informative) Calculating C-weighted time s
...