EN ISO 15189:2003/prA1

Medical laboratories - Particular requirements for quality and competence - Amendment 1 (ISO 15189:2003/DAM 1:2005)

EN ISO 15189:2003/prA1

Name:EN ISO 15189:2003/prA1   Standard name:Medical laboratories - Particular requirements for quality and competence - Amendment 1 (ISO 15189:2003/DAM 1:2005)
Standard number:EN ISO 15189:2003/prA1   language:English language
Release Date:   technical committee:CEN/TC 140 - In vitro diagnostic systems
Drafting committee:CEN/TC 140 - In vitro diagnostic systems   ICS number:
SLOVENSKI SIST EN ISO
15189:2003/oprA1:2005

PREDSTANDARD
november 2005
Medicinski laboratoriji – Posebne zahteve za kakovost in usposobljenost –
Dopolnilo 1 (ISO 15189:2003/DAM 1:2005)
Medical laboratories - Particular requirements for quality and competence -
Amendment 1 (ISO 15189:2003/DAM 1:2005)
ICS 03.120.10; 11.100.01 Referenčna številka
SIST EN ISO
15189:2003/oprA1:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
DRAFT
EN ISO 15189:2003
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
September 2005
ICS

English Version
Medical laboratories - Particular requirements for quality and
competence - Amendment 1 (ISO 15189:2003/DAM 1:2005)
Laboratoires d'analyses de biologie médicale - Exigences
particulières concernant la qualité et la compétence (ISO
15189:2003/DAM 1:2005)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 140.
This draft amendment A1, if approved, will modify the European Standard EN ISO 15189:2003. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status
as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15189:2003/prA1:2005:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 15189:2003/prA1:2005 (E)




Foreword

This document (EN ISO 15189:2003/prA1:2005) has been prepared by Technical Committee
ISO/TC 212 "Clinical laboratory testing and in vitro diagnostic test systems" in collaboration
with Technical Committee CEN/TC 140 "In vitro diagnostic medical devices", the secretariat
of which is held by DIN.

This document is currently submitted to the parallel Enquiry.


Endorsement notice

The text of ISO 15189:2003 has been approved by CEN as EN ISO 15189:2003/prA1:2005
without any modifications.

2

---------------------- Page: 3 ----------------------

DRAFT AMENDMENT ISO 15189:2003/DAmd 1
ISO/TC 212 Secretariat: ANSI
Voting begins on: Voting terminates on:
2005-09-08 2006-02-08
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Medical laboratories — Particular requirements for quality and
competence
AMENDMENT 1
Laboratoires d'analyses de biologie médicale — Exigences particulières concernant la qualité et la compétence
AMENDEMENT 1
ICS 03.120.10; 11.100.01

ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27