|
SLOVENSKI STANDARD
01-julij-2022
Nadomešča:
SIST EN ISO 10079-3:2014
Medicinska sukcijska (aspiracijska) oprema - 3. del: Podtlačna ali tlačna sukcijska
(aspiracijska) oprema (ISO 10079-3:2022)
Medical suction equipment - Part 3: Suction equipment powered from a vacuum or
positive pressure gas source (ISO 10079-3:2022)
Medizinische Absauggeräte - Teil 3: Vakuum- oder druckquellenbetriebene
Absauggeräte (ISO 10079-3:2022)
Appareils d'aspiration médicale - Partie 3: Appareils d'aspiration alimentés par une
source de vide ou de pression (ISO 10079-3:2022)
Ta slovenski standard je istoveten z: EN ISO 10079-3:2022
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 10079-3
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2022
EUROPÄISCHE NORM
ICS 11.040.10 Supersedes EN ISO 10079-3:2014
English Version
Medical suction equipment - Part 3: Suction equipment
powered from a vacuum or positive pressure gas source
(ISO 10079-3:2022)
Appareils d'aspiration médicale - Partie 3: Appareils Medizinische Absauggeräte - Teil 3: Vakuum- oder
d'aspiration alimentés par une source de vide ou de druckquellenbetriebene Absauggeräte (ISO 10079-
pression (ISO 10079-3:2022) 3:2022)
This European Standard was approved by CEN on 18 May 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10079-3:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 10079-3:2022) has been prepared by Technical Committee ISO/TC 121
"Anaesthetic and respiratory equipment" in collaboration with Technical Committee CEN/TC 215
“Respiratory and anaesthetic equipment” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2022, and conflicting national standards
shall be withdrawn at the latest by November 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10079-3:2014.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10079-3:2022 has been approved by CEN as EN ISO 10079-3:2022 without any
modification.
INTERNATIONAL ISO
STANDARD 10079-3
Fourth edition
2022-03
Medical suction equipment —
Part 3:
Suction equipment powered from
a vacuum or positive pressure gas
source
Appareils d'aspiration médicale —
Partie 3: Appareils d'aspiration alimentés par une source de vide ou
de pression
Reference number
ISO 10079-3:2022(E)
ISO 10079-3:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
ISO 10079-3:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General requirements . 1
5 Materials . 1
6 Design requirements .
...