|
SIST EN 12201-3:2011/kFprA1:2012
01-julij-2012
Cevni sistemi iz polimernih materialov za oskrbo z vodo in za odvodnjavanje in
kanalizacijo pod tlakom - Polietilen (PE) - 3. del: Fitingi
Plastics piping systems for water supply, and for drainage and sewerage under pressure
- Polyethylene (PE) - Part 3: Fittings
Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für Entwässerungs- und
Abwasserdruckleitungen - Polyethylen (PE) - Teil 3: Formstücke
Systèmes de canalisations en plastique pour l'alimentation en eau et pour les
branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) -
Partie 3 : Raccords
Ta slovenski standard je istoveten z: EN 12201-3:2011/FprA1
ICS:
23.040.45 Fitingi iz polimernih Plastics fittings
materialov
91.140.60 Sistemi za oskrbo z vodo Water supply systems
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
SIST EN 12201-3:2011/kFprA1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12201-3:2011/kFprA1:2012
---------------------- Page: 2 ----------------------
SIST EN 12201-3:2011/kFprA1:2012
EUROPEAN STANDARD
FINAL DRAFT
EN 12201-3:2011
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2012
ICS 23.040.45
English Version
Plastics piping systems for water supply, and for drainage and
sewerage under pressure - Polyethylene (PE) - Part 3: Fittings
Systèmes de canalisations en plastique pour l'alimentation Kunststoff-Rohrleitungssysteme für die Wasserversorgung
en eau et pour les branchements et les collecteurs und für Entwässerungs- und Abwasserdruckleitungen -
d'assainissement avec pression - Polyéthylène (PE) - Polyethylen (PE) - Teil 3: Formstücke
Partie 3 : Raccords
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 155.
This draft amendment A1, if approved, will modify the European Standard EN 12201-3:2011. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria,
...