|
SIST EN 13941:2009/kFprA1:2010
01-marec-2010
1DþUWRYDQMHLQYJUDGQMDL]ROLUDQLKYH]DQLKFHYQLKVLVWHPRY]DGDOMLQVNRRJUHYDQMH
Design and installation of preinsulated bonded pipe systems for district heating
Auslegung und Installation von werkmäßig gedämmten Verbundmantelrohren für die
Fernwärme
Conception et installation des systèmes bloqués de tuyaux préisolés pour les réseaux
enterrés d'eau chaude
Ta slovenski standard je istoveten z: EN 13941:2009/FprA1
ICS:
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
SIST EN 13941:2009/kFprA1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13941:2009/kFprA1:2010
---------------------- Page: 2 ----------------------
SIST EN 13941:2009/kFprA1:2010
EUROPEAN STANDARD
FINAL DRAFT
EN 13941:2009
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2010
ICS 23.040.10; 91.140.10
English Version
Design and installation of preinsulated bonded pipe systems for
district heating
Conception et installation des systèmes bloqués de tuyaux Auslegung und Installation von werkmäßig gedämmten
préisolés pour les réseaux enterrés d'eau chaude Verbundmantelrohren für die Fernwärme
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 107.
This draft amendment A1, if approved, will modify the European Standard EN 13941:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13941:2009/FprA1:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13941:2009/kFprA1:2010
EN 13941:2009/FprA1:2010 (E)
Contents Page
Foreword .3
1 Modifications to 5.1 .4
2 Modification to 5.2.2 .4
3 Modification to 5.2.3.3 .4
4 Modification to 5.2.6 .4
5 Modification to 6.4.4.1 .4
6 Modification to 6.4.6 .4
7 Modification to 7.5.4 .5
8 Modification to 7.7 .5
9 Modification to B.5.2 .6
2
---------------------- Page: 4 ----------------------
SIST EN 13941:2009/kFprA1:2010
EN 13941:2009/FprA1:2010 (E)
Foreword
This document (EN 13941:2009/FprA1:2010) has been prepared by Technical Committee CEN/TC 107
“Prefabricated district heating pipe systems”, the secretariat of which is held by DS.
This document is curre
...