|
SLOVENSKI STANDARD
01-maj-2023
Nadomešča:
SIST EN ISO 19131:2008
SIST EN ISO 19131:2008/A1:2011
Geografske informacije - Opredelitev podatkovnih proizvodov (ISO 19131:2022)
Geographic information - Data product specifications (ISO 19131:2022)
Geoinformation - Produktspezifikationen für Geodaten (ISO 19131:2022)
Information géographique - Spécifications de contenu informationnel (ISO 19131:2022)
Ta slovenski standard je istoveten z: EN ISO 19131:2022
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 19131
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 35.240.70 Supersedes EN ISO 19131:2008,
EN ISO 19131:2008/A1:2011
English Version
Geographic information - Data product specifications (ISO
19131:2022)
Information géographique - Spécifications de contenu Geoinformation - Produktspezifikationen für Geodaten
informationnel (ISO 19131:2022) (ISO 19131:2022)
This European Standard was approved by CEN on 27 October 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19131:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 19131:2022) has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287
“Geographic Information” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2023, and conflicting national standards shall be
withdrawn at the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 19131:2008, EN ISO 19131:2008/A1:2011.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 19131:2022 has been approved by CEN as EN ISO 19131:2022 without any modification.
INTERNATIONAL ISO
STANDARD 19131
Second edition
2022-11
Geographic information — Data
product specifications
Information géographique — Spécifications de contenu
informationnel
Reference number
ISO 19131:2022(E)
ISO 19131:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: [email protected]
Website: www.iso.org
Published in Switzerland
ii
ISO 19131:2022(E)
Contents Page
Foreword .v
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms.4
4.1 Abbreviated terms . 4
4.2 Unified Modeling Language . 4
4.3 Externally defined classes . 4
5 Conformance . 5
5.1 General . 5
5.2 Content of a data product specification . 5
5.3 XML encoding of a data product specification . 6
6 Requirements for data product specifications . 6
6.1 General . 6
6.2 Structure and content of a data product specification . 8
6.2.1 Data product specifications and data products . 8
6.2.2 Sections . . 8
6.2.3 Specification scopes . 9
6.2.4 Specification overview and description . 9
6.2.5 Dependency on other standards . 9
6.2.6 Requirements . 10
6.2.7 Class DataProductSpecification.12
6.2.8 Class TermEntry .15
6.2.9 Class AbbreviationEntry . 16
6.3 Identification section . 16
6.3.1 Requirements . 16
6.3.2 Class IdentificationSection . 19
6.3.3 Class Purpose . 20
6.3.4 Class UseCase . 21
6.4 Scope section . 22
6.4.1 Requirements . 22
6.4.2 Class ScopeSection. 24
6.4.3 Class SpecificationScope . 25
6.5 Data content and structure section . 26
6.5.1 General . 26
6.5.2 Requirements . 27
6.5.3 Class DataContentAndStructureSection .30
6.5.4 Class DataContentAndStructure . 31
6.6 Reference systems section . 31
6.6.1 Requirements . 31
6.6.2 Class ReferenceSystemSection . 32
6.6.3 Class ReferenceSystem .33
6.7 Data quality section . 33
6.7.1 Requirements .33
6.7.2 Class DataQualitySection .34
6.7.3 Class DataQuality . 35
6.7.4 Class ConformanceQualityLevel . .
...